iUniker Case for Raspberry Pi 4, ABS Pi 4 Case with Cooling Fan, Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B

The product is exactly as advertized, but the description leaves out a few features that I think should be noted. First, the kit comes with a total of 10 screws. The build uses 8. Now, extra screws aren't that uncommon, but adding a fifth to sets of four is not something you expect nowadays. It's a really nice touch that they would do that, as simple of an extra as it is. Secondly, the little screwdriver they include for assembly is slightly magnitized. If you drop a screw somewhere, or get it stuck in one of the holes, you can just pull it out with the included screwdriver. Helps a lot for lining them up vertically without worrying about the screw dropping, too. Thirdly, the case is very solid. It's ABS Plastic, but the finish looks as professional as molded plastic can, with no visible deformities and clear resessed lettering. It doesn't flex at all on either axis. Its small size does help it in this regard, as that reduces the resultant moment of torque applied, but still. It's amazing how many people put out an awful junky case, and this case is not one of them. Fourthly, the fan works very well. The bearing is smooth, and it is decent at providing real pressure difference and airflow for its size. It's not magic, it does make a bit of a humming noise and certianly is not 'whisper quiet', but it's not loud or overbearing at all. Fifthly, if you happen to install the fan on backwards, the connector wires are long enough to allow you to easily install it on the fan headers anyway. It's not a tight fit, either, easily doable. Such a small thing to include, but a major fustration saver. And, finally, on my unit, they put a little black sticker over the fan information sticker, because the sticker would normally be pressing up against the grate and be visible against the black case. This is a product where it is very clear that the designers really put user experience as one of their main concerns. I am a mechanical engineer by trade, and I can tell that this is a product that was really, actually designed, not just built to spec. As it is the only Raspberry Pi case I've ever purchased, I can't say for sure that it is the best, highest quality, best looking one at a good price. But I can say it's good looking, high quality, very reasonable for its price and built in such a way that it is clear the designers care about how it will be for a user to assemble the unit and what it will look like when done. They got both beautifully right, and the affordances and thought put into it just made me smile while I assembled it.

An amazing case for my pi 4. The fan wasn't too loud and it definitely kept the pi at reasonable temps. it's pretty straight forward to put together which i was definitely hoping for. it includes little rubber feet that make it feel way higher quality than you'd imagine.

The Raspberry Pi 4 Case from iUniker is a standout product that exceeded my expectations. Made from durable ABS material, it provides excellent protection for my Raspberry Pi 4 while offering a precise fit with all the necessary port cutouts. The integrated cooling fan is a game-changer. It effectively dissipates heat during resource-intensive tasks, preventing overheating and ensuring optimal performance. The fan operates silently, making it suitable for quiet environments. The user-friendly design is another highlight. The top cover is easily removable, granting quick access to the Raspberry Pi 4 board for setup and maintenance. The case also features vents and openings strategically placed to facilitate efficient airflow and maintain a stable operating temperature. Aesthetically, the case impresses with its sleek matte finish and minimalist design, making it a stylish addition to any setup. In summary, the iUniker Raspberry Pi 4 Case combines durability, efficient cooling, user-friendliness, and aesthetics. It offers excellent protection while enhancing the Raspberry Pi 4's performance. I highly recommend this case to anyone in need of a reliable and efficient Raspberry Pi 4 case.

This is a decent case, especially considering the good range of heatsinks you get, but the plastic itself doesn't dissipate any heat, unlike other all-metal cases, which I prefer since they tend to work a little better. It's not hard to assemble though, it functions well, and it's a pretty good kit for the price.

I recently became interested in buying a Raspberry Pi 4B after learning about all the cool things that people can do with such a tiny little computer. This was my first time ever putting together a Raspberry Pi or ever owning one. I was a little bit worried because some people were saying that in some Raspberry Pi cases the holes on the case might be too small or might block certain cables from connecting to the ports on the Raspberry Pi 4B but I used the official Raspberry Pi power connector with this case and an AmazonBasics branded Micro HDMI to Regular HDMI cable with this case and I didnt have any problems fitting them in the Raspberry Pi sockets. The MicroSD card was a little scary to put in and out though because on the new Raspberry Pi 4B the MicroSD card slot doesnt have a little eject mechanism that lets you push the card in to lock it in place and push it in agian to push the card out, instead now with the new Raspberry Pi 4B the MicroSD card just slides in and out freely without any clicking noise (I thought mine was broken at first). This case came with some really neat accessories too, I thought that I would need to take out my tool box and look for the correct screwdriver for the screws but the case came with a mini screwdriver with a magnetic tip that holds the screws on the screwdriver while your using it which is pretty neat. I did have a little bit of a problem aligning the heatsinks up because the adhesive is really difficult to pull off once they stick on to a surface area and the heatsinks were a little bit difficult to align properly on each surface, and on some surfaces the heatsinks get a little bit too close to the circuits on the board (like the big long heatsink) . Some of the heatsinks were a little too big like the big long heatsink that almost touches a white circuit on the top of that heatsink but it wasnt wide enough to cover the whole surface of where that heatsink is labeled to be placed in the manual, I tried to move it around but after the adhesive sets in its really difficult to peel off and I didnt want to damage the Raspberry Pi. The fan that comes along with this kit is pretty silent, I cant hear it even on the high setting. Overall I would recommend this case, its definitely better than some of the acrylic cases out there and this case is one of the ones that people have reviewed that achieves some of the lowest temperatures.

This is a great little case and exactly what I needed for my media center in my RV. The case is easy to install, feels solid, and has put up with some pretty big bounces on the road. I love that you can set up fan speeds between fast (audible hum) and slow (almost silent) so I can add cooling if needed. Weight was also a concern, since my trailer is a tiny 17' with only 1,000 lbs cargo capacity. Every ounce counts and this case is just the right blend of weight, strength, looks, and security. Since I don't need the I/O pins, it covers the functionality I need for the media center - USB ports, Ethernet, and power. This case was exactly what I needed!

I'm quite pleased with this case and would recommend it to anyone that needs an economical active cooled case. The included cooling fan can operate using the 3.3V and 5V GPIO pins for a low and high operating speed respectively. After some minor screw tightness adjustments, the fan runs on high in a way that it is much quieter than the fan add-on on the official red and black Raspberry Pi 4 case. Running at near idle for multiple hours, the CPU and GPU temperatures remained at a nominal 26.284C (79.3F) located in a room that was 20.55 C (69.0 F). The case is solidly constructed and includes screw slots on the under side to allow for wall mounting which was an excellent fit for my use case. For the very reasonable price, this will be my go to case for Pi 4's from now on.

Case is nice. Easy to assemble. Durable. The only issue is the loud, whining, high-pitched fan. I cannot tolerate it. I can hear it in the next room. I purchased a 40mm noctua fan so hopefully it will be much quieter.