- 3 Pack for iPhone 15 Pro Screen Protector, Armorite | 7X Impact Absorption, 9H+ Tempered Glass, Easy One-Pull Installation, Full-Coverage Protection, UltraFit Tray, Bubble-Free

I’ve been using ESR cases with great success so I’m trying their screen protector for the first time. I was drawn to the easy application process using the included applicator. The box includes everything you need for installation from start to finish. It comes with 3 protectors making it a good value for the money.Because this was the first time I used this type of applicator, I did my thorough research first to make sure I don’t make any mistakes. I found out that the process itself was very simple. Clean iPhone’s glass with alcohol provided. Let it dry for a couple of minutes. Remove any remaining dust with the dust remover (Tape) provided. I use a small flashlight to find every single dust left. Install the screen protector on the applicator “Case” and make sure the two tabs at the top are firmly pressed down so the screen protector doesn’t move when you pull on the tab. Remove the screen protector’s plastic “Sheath.” Place the iPhone on the case with the front facing down. Close the case cover and put a little bit of pressure on top. Pull the tab with an even pressure, in one direction, without moving it side to side. Leave the iPhone in the case for a couple of minutes. Then, remove the iPhone and gently squeeze the remaining bubbles around the edges if any. I had a few but I didn’t even have to use the “Squeegee” to remove them. A minute later and the iPhone looks with the screen protector looks perfect.Regarding the size. I just read some of the negative reviews mentioning how the screen protector is smaller than the iPhone’s screen. I will have to agree that the black border isn’t for everyone. The border will eat a micro amount of real estate from your iPhone. But you have to be extremely aenael to be bothered by it. It didn’t bother me. Every screen protector I’ve bought has the black border. It just looks better to me. The screen protector is slightly smaller than the iPhone’s screen to accommodate the majority of phone cases in the market. I’m using ESR’s clear case on my phone and the screen protector’s edge is perfectly aligned with the case without the case’s edge pushing up on it. So make your own decision whether or not to buy a screen protector with a black edge. It might just drive you nuts if you’re worried about losing a millimeter of screen real estate.ESR markets this screen protector as AR - anti reflective. I don’t see see any anti reflective coating on it at all, but at the same time it’s not super reflective. The screen is still very easy to read even when there is a bright source of light behind me. The screen protector itself is very good quality and super clear when applied properly. It’s highly responsive to touch and feels just as slippery as the iPhone’s own screen. I can’t comment about its durability and honestly, reading through the negative reviews scares me a little. I’ve used a different brand screen protector the past few years and it took a lot before those screen protectors cracked. I’ve dropped my previews iPhone with those screen protectors while riding a bike at high speeds when my iPhone decided to take off and landed on the ground, skidding for more than 5 feet on asphalt. The case was scuffed, but the screen protector was still spotless. I will have to update this review if and when I drop my new iPhone and the ESR screen protector cracks.Overall, I’m inclined to give it 5 stars because I’m fully satisfied with it. The only very minor issue is the AR or lack of it based on the product description. But it doesn’t change how I feel about the product. I’d recommend it to anyone who wouldn’t mind having a think black border and who uses a case daily, specially those highly protective cases.

I recently discovered that the Belkin protectors you purchase with your phone at the apple store aren't as simple to get replaced as I was initially led to believe.Not only does it cost $10 when you need it replaced, but you can't just pay the $10 at the apple store and get it installed. You have to order it for $10 directly from Belkin and then take in person to the apple store to get it installed.This might not be a big deal for people that love close by, but the nearest apple store to me is three hours away.I'm pleased to say that ESR has come to the rescue! $20-ish for a 3 pack may not seem like a bargain compared to other brands on Amazon, but for the quality and included installation hardware, it is quite a good value. The instructions are good. Everything is numbered. While not the simplest kit I've ever purchased to install screen protectors, it is definitely not going to be difficult for most users.My first mistake was not pushing down the screen adhesive assembly hard enough onto the retaining tabs. The first attempt was an utter failure. Learn from my mistakes! The adhesive assembly with the glass slipped out and ruined the first protector.Lucky for us, we get THREE! 😀😀The second attempt went flawlessly. The little soft paddle easily massaged the bubbles out. The fit and alightment are PERFECT.The clarity and feel of the glass are on par with the screen. The glare and reflection reduction is minor but appreciated.I can't speak to long term durability, but for fun I tried to snap the glass that I messed up in half. I pushed WAY harder than I expected without it breaking. At least when new, this glass is STRONG. 💪So far, I'm extremely impressed with the package, the instalation methods, the included accessories for cleaning and installing, and the overall appearance. I would absolutely buy this kit again, and I highly recommend it.

These screen protectors were honestly impressive for the price. Installation was much easier than expected and the alignment frame helped get it on straight without bubbles. The glass feels smooth and responsive, and I haven’t noticed any loss of touch sensitivity on my iPhone 16.I also like that the pack comes with 3 protectors because I always appreciate having backups. The edges fit well with my case and don’t peel up. Overall it feels durable, clear, and very close to the actual phone screen. Great value and I’d definitely buy again.

Installation was very easy. The product includes written instructions and an installation video. After prepping my screen with the provided alcohol wipe and dust removal sticker, I was able to apply it easily using the included alignment box. I experienced minimal air bubbles around the corners, which pressed out easily by hand without needing the included tool. No dust was collected under the screen protector either.The screen protector is very clear and barely noticeable once applied. So far, I’ve experienced no problems with screen visibility or responsiveness.I would recommend this product based on the easy installation and overall quality so far, and I would purchase it again. I’ve only used one protector and have only had it for a few weeks, so I cannot comment on long-term durability or drop protection yet.

The application process was easy and the glass went on smoothly without any bubbles. This type of protection is important if you want your phone to stay in like-new condition. I've been using them for years and I've never cracked a screen. I've cracked plenty of screen protectors, but that's what they are there for.

EDIT: The Company has reached out to me and not only refunded but sent me a “improved” version. Touch sensitivity is perfect. So for the customer service and free replacement with a better product my review has shot up to 5 STARS. Amazing company and the protector itself is flawless.There are a few categories that make a perfect screen protector:Ease of InstallTouch SensitivityDurability/longevityBlack BordersThis screen protector checks all the boxes but for one. Touch Sensitivity. I thought it would be fixed with 18.0.1 but learned it wasn’t the OS but the case. I will paste the companies response below as they are aware of the issue.First.. Ease of Install. It’s so easy a child can do it. The anti dust feature should be a standard. Awesome design.Durability/Longevity. I’ve had it on since day 1 of iPhone 16’s release and so far no complaints. Liquid and fingerprints don’t stay. No scratches or cracks that I see and I’m pretty rough with my device. I travel often for work so it’s always in a bag or in my pocket with other items. Pretty awesome.No Black Borders! I am assuming because of iPhone 16’s thinner bezel that posed a challenge for many screen protector manufacturers. This is one of the few without one. The black borders increase the bezel on the others and it’s great this one doesn’t.Now to the biggest gripe. Touch sensitivity has decreased. So much so I have to type slower so the items register better. I emailed the company and it is a known issue. This is their response:Dear Mark C,Thank you for reaching out and bringing this issue to our attention. I’m sorry to hear about the touch sensitivity problem you're experiencing with the screen protector.For phones with curved edges, such as the iPhone 16 series, we apply extra adhesive to ensure easy installation and enhanced protection. However, this can occasionally result in a slight reduction in touch sensitivity. We're actively working on developing thinner, more sensitive protectors for the future.In the meantime, to improve the touch sensitivity, please follow these steps:Settings -> "Accessibility" -> "Touch" -> "Adjust Touch Accommodations“Thank you again for your patience and understanding. We look forward to hearing from you soon.Sincerely,Leni, ESR Support TeamSo while I appreciate the honesty I can’t fully recommend this screen protector. Smart Phones are meant to be responsive with their screen technology. It’s so bad that I have to modify the way I type and I 2nd guess every response. I’ve tested all 3 that come with the package and all have the same issue. 18.0.1 did not fix it. I can only type fast once I take the screen protector off…If you’ve stuck with me congrats on reading through. If you don’t type fast or touch sensitivity isn’t that big a deal then go ahead and try them out. However if you are like me and touch sensitivity is a deal breaker then this is not the one.

The screen protector is easy to install and fits the iPhone 17 Pro Max well. The glass feels clear and smooth, and the installation tray helps keep it aligned. It gives good protection for the price, especially since it comes in a 3-pack. The only reason I’m giving 4 stars is that the edges could be slightly better, but overall it works well and is a good value.

This screen protector is so easy to apply! All I had to do was clean the screen using the included wet wipe, allow it to dry, place the phone inside the application device, then pull the tab. I couldn't believe it - the screen protector was applied perfectly on the first try. After using the included squeegee to remove a few small bubbles, the application was complete.The protector is perfectly sized to the phone and I can hardly even notice it's there. Everything needed is included, and you get three protectors in one pack which is an amazing value. The glass is high quality too, it's slick and smooth and has a nice oleophobic coating on it. Overall, if you're looking for a great screen protector, this is the one!

It's fantastic and easy to install. Thank you!

Super écran : le dispositif d’installation est extrêmement pratique, simple et efficace.Pas une bulle d’air ni de grain de poussière.

Fungerar klockrent. Lätt att sätta dit

I was really impressed with this screen protector. The presentation and packaging immediately gave a premium feel, and the included fitting tray made the application process incredibly easy, by far the simplest I’ve ever experienced with a screen protector. No bubbles, no fuss, just a perfect fit on the first try.The protector itself feels solid and high quality, offering full edge-to-edge coverage which makes it stand out compared to standard protectors. It gives my phone a sleek, seamless look while providing peace of mind with its durable build.The added bonus of a 24month warranty really shows the confidence the brand has in their product, which gives me extra reassurance.Overall, this is a great choice if you want a premium-quality protector that’s easy to install and built to last.

Perfect !!!! Dit is de beste screen protector die ik tot nu toe heb gebruikt !!!