Edge Banding Trimmer - 2025 Upgraded Mini Edge Band Trimmer & Cutter, Stainless Steel Blade Veneer Edge Trimmer for Woodworking, Durable Edgebanding Trimming Tool for Wood, Veneer, PVC, ABS

I love this design because you can see the wood and edging while you are trimming. Seeing your work makes it easier to control and adapt to any inconsistencies in the material or glue-up by slightly changing the pressure or the angles of cutting when needed. While some designs trim both sides at the same time, I prefer the greater control that this trimmer provides rather than saving, at most, a few minutes. The trimmer is easy to hold, has no moving parts, and the blade is thick and sharp. It is also one of the least expensive trimmers. It's simple and very effective.

Fairly well made, strong blade. I like how you can spin it around and use the other side before replacing the blade. It takes some practice to use it well, so you may set up some test runs first. Try not to stop once you start pushing down the edge banding. And watch the pressure used: not enough and the cut may interrupt and cause a split or chip; too much and it causes indentation lines on softer wood and digs in too much. I found I had better results the more I used it and it saves a lot of effort (rather than just sanding it).

A Very good value. Works well for hand trimming PVC and Wood edge banding. Arrived promptly and was reasonably priced. I ordered a second one and extra blades. This is a professional cabinet shop that does high end cabinets

This worked perfectly, trimmed the edge banding beautifully.This was my first time attaching edge banding, and I was concerned about trimming it, neatly without damaging the surface of the plywood. This made it super simple and very clean. As an added bonus, you can swap the blade around if the first one gets dull.

I bought a set of these and enjoyed using them so much that I bought another set for a coworker of mine. It’s such a simple tool that works so well for its intended purpose. The blade seems plenty sharp and hasn’t shown any signs of wear. I also like that it’s easily flipped with two screws to give you another set of cutting notches. I’m sure they can be resharpened with the right tools, but they’re inexpensive enough to just replace if they ever wear out!

The trimmer functions but the design causes it to cut into the top veneer/or surface. Also often leaves agroove cut on the adjacent side. I have been veneering furniture for over 30 years of experience and do notrecommend this tool!

Works well.easy to use.

Nice trimmer, works well, just watch how the grain of your edge banding (veneer) is running, to prevent it "digging in" to the banding. This is true for all such trimmers.I found it easy to use and quickly trimmed the edging on a 5" x 2" cabinet in less than 15 minutes. It took longer to iron on the edging than to trim it, and it was my first time for both.The blade is reversible, and should last a long time, considering the task it does. It looks like replacement blades are available.A good value.