1/2 Inch Shank 45 Degree Lock Miter Router Bit 3/4 Inch Stock Joint Router Bit Woodworking Cutter Tool

The bit does indeed work, but the set up time to get it exactly where it needs to be is absolutely atrocious. It would of been nice to have a set up piece that came along with this. I have to purchase additionally if I intend to take full advantage. Otherwise it seems like a decent bit, but can't put it through it's paces to really see how well it performs.

MADE IT SO EASY TO BUILD CABINETS FOR MY WORKSHOP... RAN THE WOOD THROUGH AND INSTANTLY MADE CORNER JOINTS THAT HAD NO GIVE AND WAS SOLID... A GREAT BUY FOR ANYONE WITH BUILDING PROJECTS THAT NEED JOINTS THAT DO NOT FAIL...

This product is unique, does work well, product works well with maple and cherry, does not like pine...don’t even try. After few adjustments was ready to go, here are some tips,use table router only, when doing vertical cut use a vertical router jig for perfect results each time, cherry wood not cheap, now could see this working well with pine if you had a router table mounted router with variable speed, if on low speed pine is okay, wouldn’t recommend for handheld even with a edge guide

This bit works exactly as expected and saved my rear during a remodeling project. I used it to miter LVP around stairs as the stair nose system that came with the product was absolutely ugly. Basically this bit survived around 40 runs thru pressboard which is much harder than wood. I was really impressed! After those many runs with a hard material I would have expected to have to order another bit but nope! Still as sharp as when I bought it! Highly recommended!!

Worked on soft wood, pine but could not handle maple, just not sharp enough.

I use miter joints pretty often, so I was greatly encouraged at the idea of doubling the amount of glue surface it such a weak joint. Unfortunately I have used a router very little, and a router table not at all. This is not a cut for a novice, there is too much going on at the same time. It does make the cut though, I cannot knock it any stars because it does do what it is supposed to. I hope to be able to use it effectively in the future.

I do woodworking as a hobby and the bit worked wonderfully. It would have been useful if there was instruction for setup, but I have never received any instruction for setup with all my bits so this was nothing unusual. It was a great value and left a good cut, I would purchase again.

If you've seen the video advertisement where they zip two pieces across a router table and make a flawless corner joint, I just want you to know that this product isn't that easy to use. I don't know if it's this particular brand, or the advertising just glamourizes the reality of getting it to work properly. I'm still experimenting trying to figure out what it takes to make joints quickly and flawlessly with such a tool.

All good

Funciona como esperaba

Útil y práctico

It takes a few pieces of practise wood to adjust to proper cutting to match pieces properly. It would work better with its size to have four cutter edges instead of two which work OK. Problem with two is that plywood tends to break up quicker since there are only two cutter surfaces; therefore plywood layers fragment quickly. running slower starts wood burning. Over all a great idea.

Does seem to burnout quick if you are using hardwood. Otherwise it did as well as I expected.