🔑 Unlock Convenience with a Click!
The Marantec Digital 392 Mini Handheld Transmitter is a state-of-the-art remote control garage door opener, designed for seamless operation and convenience. Weighing just 40g and featuring a compact size of 54 x 39 x 14 mm, this transmitter operates on a reliable 868.3 MHz frequency and comes with a CR2 battery included, ensuring you have everything you need for easy installation and use.
| Manufacturer | Marantec |
| Item Weight | 40 g |
| Package Dimensions | 7.4 x 5.6 x 5.4 cm; 40 g |
| Batteries | 1 CR2 batteries required. (included) |
| Item Package Quantity | 1 |
| Batteries Included? | Yes |
| Batteries Required? | No |
V**E
Correspondait à la description
Cette télécommande a bien fonctionné et nous avons pu la paramétrer facilement en suivant le petit mode d'emploi qui était joint.
C**N
Sehr einfach und funktioniert gut
Sehr einfaches an Lernmittel der alten Fernbedienung und funktioniert super. Es ist klein und kompakt.
B**K
Funkade fint
Smidig omprogrammering. Sämre kontakt på den gamla fjärren så fick ta isär den och hållastiften mot kretskortet innan det funkade.
P**D
Tip for programming...!
Great product that works very well.Make sure your existing remote is 868.3MHz.Use the supplied programming (x3) pin, by slotting into the small holes on the side of the original remote.Then do the same with the new remote. It doesn't matter which side you use.IMPORTANT: Press and hold a button on ORIGINAL remote first. Then press and hold the matching button on the new remote. The new remote LED should rapidly blink for a second and then go steady. Let go of both buttons at the same time.If the new remote just lights the LED without blinking, then programming will not happen.IMPORTANT: The instructions say insert pins into the fully. However, do not force it in. Just enough until you feel some resistance. Normally 2mm of pins can still be seen. If programming doesn't happen, try pulling the pins out a little further.I had a hard time programming as i "fully" inserted the pins. It was only when i tried difference insertion depths that it suddenly stated programming.
C**N
Funciona correctamente
Necesitaba clonar el mando con el original y fue muy sencillo
ترست بايلوت
منذ شهرين
منذ 5 أيام
