معلومات عنا
دعم العملاء
احصل على التطبيق
قم بتوجيه الكاميرا لتنزيل التطبيق
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
🔧 Elevate Your Monitoring Game!
The Pressure Transducer Sender Sensor is a high-precision device designed for accurate pressure measurement in various fluids and gases. With a ±2% FS accuracy and a robust stainless steel construction, it ensures reliable performance across a full temperature range. Its smart voltage output and surge protection make it a safe and versatile choice for professionals in need of precise monitoring solutions.
D**S
works fine, on time
This is an inexpensive part, but works fine and arrived on time. I measured the current draw at about 2.35ma continuous, could be used battery operated, would be fine for low pressure air line, water line, etc. Accuracy ok for most uses. Connector is nice, would be about the same as the whole sensor if purchased separately.
B**2
Perfect for remotely monitoring Pool filter
Installed on my pool filter using a 1/4" brass Tee and a 1/8 to 1/4" brass converter. Pretty simple. Used Raspberry Pi with ads1115 voltage A/D board so that Pi could read the pressure and send to my Home Assistant program. Very accurate.
S**8
Great for testing
I'm using this as a test 300 psi transducer for my transmission pressure Arduino project. It works very well for that purpose but once I am done and everything is installed I will pay the money for a more accurate unit.
A**R
Does not work, fried input on ecu
Waited a few months to test, mine does not work, 12v in yields 12v out on an out put that is supposed to be 0-5V. Great for destroying the ecu in your car. Stay far away from this one
J**N
Pressure sensor
Used this on my LS swap 94 wrangler with Holley terminator X system worked great at 1/5th the cost of the one from Holley! Very happy with purchase it was plug and play, cheers
A**0
Exactly as described, works good. It’s in an abusive location so we’ll see how its durability is.
Fast shipping
M**H
Edge tuner
Does not work with edge tuner
W**!
Very easy to work with, low cost, BUT pressure range is NOT ACCURATE
I bought 5 of the 100 PSI pressure transducers for a scientific project. I needed to at least semi-accurately read pressures for a combustion system, looking specifically to measure pressure values and pressure rise times. To calibrate my data system, I hooked up all 5 of these to a pancake air compressor and read the voltage outputs at multiple pressures on the wires with a multimeter -- ALL 5 pressure transducers MAXED OUT at 30 psig and pressures higher than that would read out the same voltage. A little disappointed I couldn't get accurate values for the range I wanted, but still managed to read extremely fast pressure response times, so I couldn't complain. Project ended up turning out great nonetheless.
ترست بايلوت
منذ أسبوع
منذ أسبوع