RunCamC-20T 3-Axis FPV Camera Gimbal,Pan Tilt Mount,FPV Head Tracking with UART,PWM Control Compatible with DJI O3 for Walksnail Avatar Moonlight Link for RC Car Airplanes Drone (Standard Version)

Has great movement and stabilization 🤯 i believe this has best movement available now. Works very well when all figured out. Smooths the ride out very well. I am making a stand alone unit to switch between rc truck and drones. Got the integrated base plate and head tracking unit to go with this and DJI 03 air unit. I had to get a 03 air unit armer (ChadRains armer) to allow air unit to go into full power mode without a flight controller 😉 ready to put this all together and run in my arema fireteam that is built to the maxx 🤯😁 very happy with purchase. Great quality and value. Light weight with best picture quality possible. Running on a 4s battery and have great battery life 😁

I bought the analog version. Do not expect much in the way of instructions, videos, or guidance. I you get this for analog you're on your own. There is no discernable way to use this with a 19mm analog camera. Most analog cameras have the screws on the sides but this requires you have screw holes in the back. Think you'll 3D print your own adapter - forget it. There is little to no room to design an adapter for analog. The largest analog camera I could conceivably fit on this on this was the CADDX Ant NANO which is tiny, and even then, you'll need to make custom jumpers to adapt the camera and figure out some way to mount it. Also, this gimbal has software called gimbal config that you have to find online on your own, but to plug the gimbal into the computer for configuration and firmware updates requires a USB adapter which this camera does not come with nor is it available on amazon. At the time of writing, you can get the USB adapter free through the CADDX website, reportedly for a limited time, but it will cost you $10 in shipping. You could probably make your own USB adapter but that would be a tedious project in and of itself. I really wanted to make this work for my application, but this gimbal just is not analog friendly whatsoever. I have patience, 3d printing, and electronics skills, and it did not take me long to assess this would be a royal pain in the butt to use and the mods needed to adapt it would likely be jenky at best. I purchased the CADXX GM3 version of this ultimately and upgraded to walk snail avatar video at the same time. It is 100% clear that this gimbal is made for O3 and Walk snail, and not analog. I do not recommend for analog applications. FWIW, the gimbal itself is a nice and equivalent product to several similar gimbals listed under different names. It would be a great product for HD, but practically useless and should not marketed for analog applications without loud disclaimers that you're in for a tedious project tha would be so fiddly that there is a good chance you will break something.

Does not fit O4 Pro

This gimbal is fantastic! It works with the latest release of inav 8 via a single uart, or you can go old school and use multiple pwm pins to hook it up. It's fairly lightweight and the stabilization is top notch. Everything you need is in the box including the usb programming adapter.

This C-20T 3-Axis FPV camera gimbal offers compatibility with DJI O3 devices and many more. It is compact and lightweight, but well-constructed and durable. It is supposed to enhance the FPV experience with head tracking support. So far, it fits our DJI air unit and has added extra comfort and flexibility for extended use.