ArmorSuit 6 Pack for Garmin Venu 3 (45mm) Screen Protector MilitaryShield HD Clear Film - Made in USA

I purchased the ArmorSuit 6 Pack Screen Protector for my Garmin Venu 3 and I am very happy with the quality. The fit is perfect for the 45mm screen and once applied it is almost invisible. The HD clear film keeps the display looking sharp with no loss of touch sensitivity. The material feels durable and flexible and provides excellent protection against scratches and everyday wear. After installation the screen looks smooth and clean and does not interfere with normal use of the watch. I also appreciate that this is a six pack which gives great value and peace of mind for future replacements. The protectors feel well made and it is nice knowing they are made in the USA. Overall this is a reliable high quality screen protector that does exactly what it is supposed to do. I would definitely recommend it to anyone looking to protect their Garmin Venu 3 screen.

I haven't used a screen protector on any other watch (Apple Watch, Fitbit) until I got a Garmin Venu 4 (41mm). It's so expensive that I figured I'd be pretty upset if it got scratches on it. Here are some things I liked (+) and don't like (-): + Installation was pretty easy. + It comes with 6 protectors, especially since I had to scrap one after getting a bunch of dust under it. + I don't notice any degradation of display quality with the protector on. - The screen protectors give the watch that cheap plastic feeling when you use the touch screen. I don't like that feeling, but I'm glad I kept it. - Installation isn't perfect. It's easy to install without bubbles, but it does have "bubbles" on the edges, which is kind of annoying. I never had an issue with it coming off by accident, so those points where it's not fully adhered at the edges seem like they're just cosmetic. I don't remember what happened, but I managed to scratch the body of the watch AND the screen protector. I attached photos so you can see the damage to the watch frame and the white marks on the screen-protected face that would have been on the glass if not for this screen protector. I will definitely buy more when I run out. For me, the trade-offs are worth protecting my device.

This Garmin watch screen cover works well and does its job. It was easy to install once I actually read the directions — my first attempt didn’t go great because I skipped that part. Totally my fault. After following the instructions, installation was straightforward. The cover also doesn’t take very long to cure, which was a nice surprise. Once set, it looks good and provides solid protection. Overall, a good product as long as you take a minute to read the directions first.

Oh my goodness! Let me say WOW 🤩 . It is a great product! Let me say over the past almost 5 years using different brands of sticker screen protectors for my watches-this is the best one yet! Majority of them are literally just like a sticker and if you don’t apply them precisely at the first try, you’ll be dealing with bubbles, stretches on the surface and it just won’t stick! This brand is magic with the liquid adhesion application! It was easy enough to install following the instruction…like literally 30 seconds and I was done! It’s almost invisible! It feels as the screen itself, to the touch, so it absolutely doesn’t interfere with touchscreen functionality! Might I add, I also did their screen for my IPhone and it’s the best brand! Shoutout to the great brand! Both phone screen and watch face took me like a minute to install! Just follow the instructions and you’ll be very pleased with the results!!

I have to say...this went on without a glitch. I did notice that there is about 1/64th edge where the shield doesn't cover...but I read the directions, put the thing on, and it went on without too many issues. I did have to pull it off once or twice since I couldn't align it right to the edge of the rim...but I understand it's better to leave a little gap then having it hang over the seam where it would likely start peeling off. I must admit...I've done quite a few decals in my day so not sure of that had anything to do with it...but no bubbles or anything right from the start. I had it plugged in charging for an hour while I waited to push the edges down over the rounded edges of the watch face...but even then it just went very smooth. I had a couple tiny foam type bubbles...but waiting a while longer I was able to push that edge down and the bubbles disappeared.

Doesn’t stay long. Starts to peel after couple weeks. Easy to apply and protects the screen. Didn’t give 5 stars because of the durability

In my opinion, this is the best and highest quality screen protector you can buy for the Garmin Venu 3S. It fit my watch perfectly, and when I installed it, there was absolutely no dust or bubbles trapped underneath. The protectors feel sturdy and well-made, and I was pleasantly surprised by how easy they were to apply—even my teenage daughter had no trouble installing hers. The kit is generous—it includes 6 screen protectors, a bottle of installation spray, a microfiber cloth, and a squeegee. I especially liked the installation spray because it gave me the flexibility to reposition the protector until I got it just right before letting it dry. The QR code on the guide links to a helpful video, which made the process even smoother. I had already used one protector when I took the attached photos, but with six in the pack, I know I’ll have plenty of backups. Overall, this is the perfect screen protector for your watch, and I’ll definitely be purchasing this brand again when I need more!

Some of the negative reviews here are a bit confusing. I'm writing this one primarily to set a few records straight. First of all, these screen protectors are stickers. They're thin plastic. Their purpose is to add a layer of cheap material over your expensive glass screen in order to prevent scuffs, scratches, chips, etc. The reason you get six in the package is that these are not supposed to be durable! They're expendable and disposable. You use one until it wears out, then you use another. Second, installation is an absolute breeze. I've used lots of these sorts of products for my devices over the years and this one had one of the easiest installations I've ever done. Anyone who is complaining that it took them four tries or whatever, didn't bother actually watching the installation video. The protector also wraps around the curvature of the Versa 2 just fine. Again, you need to watch the video and do it at the right time. I recommend watching both the watch video and the "curved device" video as you'll get tips in each. Here's a quick run-down of how to properly install: - First of all, you need a dust-free area. A good tip for this is to use your bathroom, immediately after a shower. The water vapor will drag a lot of the dust out of the air. - Second, make sure your hands are clean and oil-free. See the shower tip. - Next, use scissors and cut out one protector -- you'll be spraying it with a bunch of liquid and there's no reason to get the adjacent ones wet. - Now spray the watch face with the included solution. One spray seems to be sufficient here. - Now spray the fingers on both of your hands. Don't worry, the solution doesn't smell especially bad. - Now spray the front of the protector. - Now use your wet fingers and peel up the protector and liberally spray the back. - Finally, put the protector in place on the watch. Slide it around a bit into position. Hold half of it in place with your thumb and squeegee the liquid out from the other half. The protector will shift a bit. Gently push it back into place. Then hold and squeegee again, in a different direction. (I alternate Up-Right-Down-Left when doing this so I get equal coverage.) - Keep repeating the above step until the protector starts to stick to the watch. Then give it a couple of final swipes with the squeegee. - The curved edges will not be in place at this point. That's okay! Put the watch down and walk away for 15 minutes. - Now come back and using the microfiber cloth gently polish/press the protector, from the middle outward, all the way into the curved edges. They'll stick. Push them evenly around the face of the watch and all will be great. - And finally, wait 8 hours. Come back and give the edges another little pass if you need to. I'm deducting one star primarily for that 8 hour wait. I've never had to do that before. The installation instructions mention a hair dryer for quicker drying but they also mention simply doing this right before bed, and that seems to be an easier and perhaps better option. Once in place, the screen protector is crystal clear and doesn't interfere in any way with using your watch. Which is really all you can ask for. I'd like these to be ever-so-slightly wider. They don't quite cover the entire glass face of the watch. (They're short by maybe 1mm.) That's fine from a usability perspective and you can barely see it but I think a bit more edge-to-edge coverage would help improve snag resistance. These sorts of protectors, for me, always seem to wear out at the side because a bit of lint or dirt gets under the edge and destroys adhesion, so having the protector right up against the metal would help. Anyway, that's that. Easy install, great clarity, does what it's supposed to do. No real complaints except the 8 hour set time, but even that is not a very big deal. Good product.