ESR 2 Pack Screen Protector for iPad Air 13 Inch M4/M3/M2

I’ve used ESR screen protectors on my iPhone for months and I’m extremely happy with the performance of them, so I was pleasantly surprised when they offered screen protectors for the M4 iPad Pro too and knew they were the only choice. I use my iPad every day for university work, films at home and even mounted in my car as a CarPlay screen, and it has no signs of use at all yet, no scratches (even from my Apple Pencil where I use a metal tip), and no cracks. Works perfectly with the Apple Pencil pro too. Very easy to install with no bubbles at all and no dust, and of course comes as a 2 pack for when this one is on its way out. I’ve said it once and I’ll say it again, I’ll only ever use ESR screen protectors on my devices!

Process for applying the screen protector works very well. There's a tray into which you place the iPad, then the screen protector snaps securely over the top and into the tray, you do the finger swipe part and wait (about 30-60 seconds rather than the suggested 10) for the protector to adhere to the screen of the tablet for a (mostly) bubble-free, centred fit. Just had to squeeze out a few bubbles from the edges, but a shirt-covered finger was all it took, so no frustration. The only bit I found subpar or annoying was cleaning my screen because the included wet and dry wipes seemed to do more harm than good, but I managed eventually.

So far so good, only time will tell with any kind of protection. Goes on screen easily with just a minor bubble in corner.

Excellent

The application and alignment tray makes this the easiest screen protector I have ever used, and in my opinion it’s totally worth the money. I was able to fit the screen protector perfectly in just a couple of minutes including the time to clean and prepare the screen. It fits perfectly, plus you get an extra screen protector too so sure you keep the alignment tray. I was so impressed that I bought a paper-feel screen film from the company, to go over the top of this one to give some extra friction when drawing.

Never been disappointed with your products before this one, never had any issues with iPhones or iPads, first screen protector massive bubbles yet it states bubble free application on the box, no customer service reply either so it’s 100% put me off the brand!

The ESR 2 Pack Screen Protector for iPad Air 13 Inch (2024) with M2 Screen Protector is an excellent choice for iPad users seeking durable and high-quality protection. The tempered glass film offers superior scratch resistance, ensuring your screen remains pristine. The HD clarity maintains the vibrant display quality of the iPad, without any noticeable loss in visual performance. The inclusion of an easy application tray simplifies the installation process, reducing the risk of bubbles and misalignment. Overall, this screen protector combines robustness and clarity, making it a reliable and user-friendly option for protecting your iPad Air.

After recently buying a new 13” iPad, I needed a screen protector and after reviewing iPad covers I came across the ESR brand which I’d not heard of before. They sounded really good so after putting their cover in my basket I deleted another brands protector and added this one even though it was £4 more. It’s a great glass protector but I must admit when I opened the box I was overwhelmed. I was shocked with the amount of packaging, especially as we are all supposed to be cutting down. I can understand the reason due to the intricate design of applying the protector. ESR don’t do things by halves. And the packaging was far from being irrelevant. Everything was needed. It was well made protective packaging, not some cheap plastic or cheap cardboard. The box is beautiful in itself. 😉 You know you’re going to get a good quality product when you see how far the company has gone just on the packaging. As for their application design, it was very clever. This is where additional plastic came in to play. But I did find it complicated at first. An older person would find it much harder. I’m not one for video instructions and we shouldn't rely on them, we still need to read. But the paper instructions were just too small for me to read, even with a magnifying glass which you shouldn’t need to use. It shouldn’t be that hard. So I had to use the QR code to access the video which I’m definitely not a fan of. After watching it, I got the gist but I had to keep rewinding. Once I knew what I was doing, I took both the film protectors off and applied it with the very unique design. I pressed down the line on the left hand side then the magic happened. It was just like the video. I wondered at first if my action had activated an air suction stage but it hadn’t. It was a bit like Etchasketch or the primitive version of that. I was impressed. But unfortunately it didn’t work out as it should as there were two big bubbles and a couple of smaller ones that didn’t get sucked out. I tried with the soft cloth to push them out but it didn’t work. I was not going to waste the other protector like another user did and try again so I peeled back the film to check and it was still there. Unfortunately once I replaced it I had loads of extra bubbles. I’d not realised at the time these were not inbetween the iPad and protective glass but between the film and the glass. My husband took over in the end to try to remove them. He gave up and we peeled the film back to work on it again. To our surprise the main bubbles had gone and it look perfect. So the reason for the 3 stars is not for the quality of the glass protector but application process and yes, all the packaging and extra plastic even though I can see it was relevant in the application and product presentation and protection. The paper instructions were just too small and feint to read. Nothing should be that hard work. The magic process did not work as expected, which made it a very long process in the end and overall very time consuming and there was so much to get your head around it was complicated. Even though it’s very innovative and once completed I can look back and think yes, it was simple in the end, but hindsight doesn’t exist when you are trying to apply a new invention. My iPad was new out of the box. The screen had not been touched but I still followed the cleaning process so I don’t understand why the magic did not fully work. I would advise that the box came with a plastic scraper like other protectors have, to push out the bubbles, it would be a lot easier. Overall I will say that I’ve had many phones and one previous iPad, with various sticky plastic protectors and glass ones, all of which were a basic protector with a film back and front. I had no problem applying them and any bubbles were pushed out easily with the plastic scraper thing. It took a few minutes to apply. I didn’t need to read the instructions as it was all self explanatory. As much as this is a great product from a great company and someone had worked hard on the application process, I just feel that sometimes you don’t need to reinvent the wheel. There’s always someone trying to do better than someone else because they think they can do better. In this case you can’t. Consumers like things easy, they don’t care about fancy packaging and inventions. They just want a basic product where the application process has worked perfectly well for over 25 years. Think about the environmental implications when you are designing too. Is all that worth it to be the company with a great innovation, that actually is not perfect.

I recommend this product, good quality

This is so user friendly and I applied screen guard for very first time in my life. I never realised it could be so easy with clear instructions and video provided. Though I always wanted so. Looking forward to trying same for phone. And when something like this could come for MacBooks too. Must Have..!!

I got 2. One was faulty with a manufacturing defect. One was perfect. I am satisfied with it. The pencil just glides over it. My previous screenguard was not as good as this is. It is definitely superior to the previous guard I had. Really easy to apply with what you get. Superb purchase. You only need one good and perfect application and you are set.

For the first time in my life... I was able to pull off a stunt of installing a screen protector perfectly and that too on a large screen of ~13 inches!! ESR's apparatus and setup accessories made it possible and flawless. If one follows the steps accurately, the installation would be perfect. Please watch a YouTube tutorial before attempting. Also try to clean the screen with a microfiber cloth and a special display cleaning solution for the prerequisites. The dust removal stickers are absolutely crucial. There MUST not be visible dust particles on the screen! It is the major reason behing those dreaded air bubbles. I have previously burnt money getting screen protectors from other brands and the results were always a disaster. The dreaded air bubbles always destroyed the installation. But ESR has solved this quintessential problem for once and all! I am a lifelong ESR fan from now.

De esta marca todo lo que compro tiene una calidad excelente. Protege muchísimo y con el aplicador que tiene se pone súper fácil. Le está quitando muchos clientes a Spigen, y con razon