Wangdd22 2pcs/lot A8 A6 Heated Bed Line 90cm Hot Bed Wire Hotbed Cable for Mendel RepRap i3 3D Printer

Here's my review of these heated bed cables (spoiler alert: they're good).PROS:1. Unlike the pictures, these are the upgraded cables with two separate cables for ground and VCC to avoid the connectors overheating.2. The power cables are a little bit thinner (since there are two of them) so they're more flexible, they bend easier in the cable chain and transfer less force to the connector.CONS (but they're not enough to take away a star):1. The thermistor connector is a three-pin connector, which doesn't work with my Anet A8. I had to replace it with a two-pin connector.2. The price ($11) is a little high for two cables, you can get these from China for a couple dollars. They might not be the upgraded ones though.Overall, very satisfied with these.

Great upgrade over the single, heavy-gauge power wires that come stock on the A6/A8. Double positive and double ground wires. The back of the bed plug is filled with high-temp silicone to prevent the wires from working loose (the main cause of the stock harness arcing and burning the plug).Wires are more flexible than stock, and have proved to be more durable during my use.

We kept getting thermal runaway errors shutting off our prints with the original cable so we purchased these replacements. I agree with the other poster about the power cables not matching the pictures: Instead of a single black and red cable there are two slightly thinner cables on each side which should improve the connection. All the connectors seemed solid, I didn't feel like I need to add soldering to any of the crimped connectors. We've printed several jobs now with no errors.

This is the fix for bed heating issues, this has double power and ground as well as epoxy holding the wires and pins to the connectors. This is the real deal not to mention it had next day shipping! I originally ordered one directly from Anet but it was taking so long to ship that I was happy when I found this. If was the perfect fit for my Anet A8

Great replacement 👍

Fits the A8 printer. Works better. Kept getting a "def" error for the extruder and the Hot bed. The Hot bed wire had melted and was going in and out. This wire is much better, and solved our problem. Thanks!

Fantastic replacement vs stock cable. Cable was completely filled out, and not missing the additional black and red cables like the stock variety, spreading out the amperage in order to avoid burning up connectors.

Works great with my Anet A8, These are the upgraded wires with 3 pin for the thermistor which fits in the anet v1.0 board. Highly recommend.