الوصف
- This leather stropis a branded razor sharpening product made from 100% genuine buffalo leather with eyelets for attaching to both sides. With the help of such a hanger the blade of your razor can be optimally pulled off for shaving. By peeling off the knife on the leather, the degree of blade is raised and the razor prepared for shaving and extra sharp.
- The hard-wearing buffalo leather is smoothed on one side of the belt and natural on the other. Both sides can be used for sharpening the knife. For the razor care, you should pull the blade over the strap before each shave, so that it cuts optimally.
- If you use paste with abrasive particles on the stripper, it is especially important that it is only used on one side of the hanging belt, as permanent working of the blade with paste will damage it.
- The stripper of RAZZOOR has a length of approx. 400 mm and a width of approx. 45 mm. The quality strop has the RAZZOOR logo embossed on the leather. The RAZZOR brand is known for its first-class products for wet shaving - pure shaving culture, that's the motto!
- Already more than a hundred years ago, leather straps were used to sharpen razors. Even our grandfathers and great-grandfathers knew that this way the steel of the blades could be permanently maintained and kept sharp. With good care, a belt will last for many years. It is important that the stripper is occasionally rubbed with leather grease, so that the leather does not become brittle.
Very exclusive strop made of genuine buffalo leather, especially soft and flexible. With eyelets for hanging and holding. Length about 400 and width about 45 mm. The soft leather of the buffalo skin is particularly hard-wearing and extremely flexible and durable. As a result, the belt is not only very robust in use but can also be rolled up and stowed away to save space and good.With this strop you can achieve the best results in daily shaving of your razor for shaving. Before use, grease the belt. For this we recommend special leather grease.Due to the length of the razor blades of about 75 mm, the knife should be pulled diagonally across the belt at a shallow angle so that the entire length of the blade is machined. The cutting burr should only be erected again. For 'sharpening' we recommend the corresponding emery pastes.
