SmrazaRaspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply with ON/Off Switch, 3 Pcs Heat Sinks for Raspberry Pi 3 Model B+, Compatible with Raspberry Pi 3 Model B, Raspberry Pi 2

Case has everything you need to get up and running with a new Raspberry Pi 3B+ and keeps your Pi cool even after overclocking. Air Flow is ideal and the fan is very quiet. A few times I had to make sure the fan was even running since it was so quiet. Temps remained around 38 degrees Celsius so the heatsink and fan combo is doing an amazing job. This is while running a 4.4.1 build of RetroPie with some demanding games and emulators. Highly recommended.Knocked off one star as the screws come to a point on the bottom and can scrape a surface if the case is jostled around. You might want to add rubber bumpers on the bottom or make sure the case is located somewhere it isn't going to move around. If not, put something under it to prevent scraping up your media or desk. I'll add some images when I have a chance.

I was having my raspeberry pi4 run very hot around 70-72 degrees C and purchased this case. It was simple to put together as it just stacks together and you put the pi in the middle. The fan easily connects to the board and works. It does make a little noise but not really something you can hear unless you are up next to it. Good quality and does the job. Just make sure you put the plates in order in the correct way or you might have issues with connecting cables to the pi like I did but a simple reversal of one plate solved that. The power cable that comes with it is great and works and enjoy the easy access switch it has to turn it on and off.I would recommend this product

This is the third case I've purchased from Smraza. I love their products and highly recommend them. The installation is not hard at all... It only took me about 10 minutes to put together. Just follow the instructions carefully and you'll have it put together in now time. If you're having a hard time with it, Smraza made an easy to follow video on YouTube. This case is NOT a 3D printed case. The design is stellar.. It's solid and there's easy access to the SD card. The fan works beautifully and works right away, no programming needed. I tested both speeds for the fan and they work with zero issues. The heat sinks are nice and easy to apply. One of my favorite pieces of this product is the power adapter, the On/Off switch is so useful for single board computers. Smraza is a great company that makes awesome products. They truly listen to the customer and make amazing cases. Can't wait for them to grow and start expanding their inventory.

I finally bought my Raspberry Pi 3 B, THE very day before the 3 B+ was announced. <sigh>To future-proof myself, since the case I bought with the 3B was not B+ compatible, I bought this case as a replacement. GREAT decision. It fits my current 3B perfectly, and I expect the same fit when I finally get the next one. Smraza has incredible support. They have a support rep named Stacy (I don't know if Stacy is a lady or gent, but I'm going to call her a lady from here, and I really hope that if I'm wrong he won't get too upset with me) that helped me think through the process of upgrading to this case, and I greatly value her work with me as I decided to do so.Anyway, all the ports on my 3B are easily accessible. Construction was a breeze thanks to the easy to follow instructions, with easily followed pictorial examples. The fan works fine, the power cable with power button works fine, too.Oh! By the way, it looks sharp, too.All in all, if you are buying a 3 B+ now or in the future, or even sticking with the 3B, you can't go wrong with this case. As for the other reviewers wish for metal screws, I don't see them as a need for the main four post screws, and the screws for the fan ARE metal screws. (and I'm going to steal his/her idea about turning the four post screws upside down. <thanks for the idea>)Unless you aren't going to buy a compatible RPi, you need this case.Stacy and Smraza management, thanks for the great experience, I am now a lifelong customer.Be blessed everyone.p.s. Smraza management, give Stacy a raise. She (he?) greatly deserves it for incredible cx support.

I really like this bundle. Its everything you'd need for the pi is there. The Pi doesn't complain about voltage while running retro pi. The included cable feels strong and not cheap like the cables you'd find at a gas station. Everything included is great.One thing I really would have liked to have is rubber standoffs for this. Without it if I'm using a wired controller I can move the unit all together because nothing. Contacted the seller about that and because of a mishap that I had (tightened the plastic screw too tightly). Seller Responded quickly and got my issue solved.I really like this bundle.

This is a very solid case, and seems to work well. The case documentation is better than average - in fact, quite good.The fan is silent, which is nice. Overall, it has a solid, professional feel.On the downside, a couple of things. The case is made of many layers, so it is a bit of a pain to put together and take apart. Note a huge problem, but compared to snap-in cases, a nuisance. Also, if you loose the instructions, good luck putting it back together!Also, with it put together, you can only see the power and activity LED's by peeking in through the top of the case. On most cases, they are visible from the front.

Its a decent case, the fan isn't obnoxiously loud, and thankfully the only pieces you have to peel the tape off of are the outside layers unlike most cases in this vein. On the other side this case is roughly cut compared to many of the other layered cases I use. There is a significant grit to the outside that in my opinion is not pleasing to touch, kind of like rubbing your fingers against fine grit sand paper. Only other thing is I hate plastic screws and wish it had metal. Ultimately this case does its job, the fan is decent, and its not overly expensive so you cant really gripe too loudly on quality.