CellMeter-8 Voltage Capacity Checker Balance Discharger/Servo Tester

الوصف

CellMeter-8 Voltage Capacity Checker Balance Discharger/Servo Tester INTRROUDCTION:CellMeter 8 is a clever device than can show you the condition of your battery packs.It can be used in the most common battery types used for RC modeling,namely:Lilon (Listhium lon)Liop (Lithuim Polumer)LiFe (Lithium Fenite)LiHV(High voltage lithium battery)NiCd(Nickel cadmium)MiMH (Nichel MetealHydrate)Lithium battery types (Li-Po,Li-ion,Li-Fe),without the need for additional power supply,CellMerer 8 can support 2s-8s.Test is lithium battery,you need to access more than 3s of nickel batteries or 5V UBEC to NiCD/MH port for CellMeter 8 to provide working power.Cellmeter 8 can support 4s-8s,such as the need to test less than 4s of nickel batteries,you need to access 2-8s lithium port for CellMeter 8 to provide working power. CONNECTING A BATTERY PACK CellMeter 8 there are two battery connection ports: The connecting port of the lithium battery is 9 pin 2.54mmcan be directly inserted into the 2.54mm of the connecting pirt of the lithium battery line plug.Connect the battery pack to the plug,the negative electrode of the balanced line plug is aligned vidth the CellMeter8 Lithium port.(Negative Location clise to the NiCd/MH port).Nickel battery connection port specification for 3 pin 2.54mm nickel batteries.The main line of the nickel battery pack is generally 2 pin size PARAMETERS SETTING CellMeter 8 Connect the lithium battery or nickel battery in the working state. Press(press to buttin 1s above) Menu Setup button,Enter parameter setting mode,Parameter setting mode,short press Menu Setup button is to enter the next parameter settings,Long press is out of the parameter setting mode,Return to battery detection mode,Patameter setting mode Short press Cell Key to reduce the parameters , short press Mode key to increase the parameter,Discharge eng voltage parameter setting state,Long press Cell button to quickly,Long press MODE button for the rapid increase.