PJ1 Fast Black High Temp 1200 Paint

This stuff is awesome. Out of all of the VHT paints ive used, this one give the best finish by far. Painted exhaust on my bike and even recoated my bbq in the stuff. Stands up excellently to the heat. I would only recommend this product!

Best high heat paint on the market to my mind.Good preparation is key with this product and if you have a large oven best results achieved curing the finish.Used this on my Harley pipe heat shields and the finish for me is awesome.(The shields were sandblasted first)Top marks.

Seems perfect for what i wanted, ( Lambretta down pipe ) only time will tell.Goes on nice and smooth, i used 4 thin coats.Good preparation is important, sand off all rust and old paint, degrease thoroughly spray part and cure using heat.

Used this on our Foster child's scooter exhaust which was a bit rusty looking it looks really nice now

Arrived very quickly. Easy to use. Has cured as black however due to the Covid-19 lock down haven't been able to ride bike as yet to see whether this will impact the colour. At the moment, very pleased product as its done it's job!

I brought this paint for the downpipes on my 1300 Hayabusa and it works well, been on the bike for over 3 months now and the is no flaking or discolouration

Four coats applied over four days , only took one day to burn off.

Great quality and durability’s providing application instructions adhered to.

My exhaust pipes were looking a bit worn. I did plenty of research and determined PJ1 to be the most suitable High temp paint for my exhaust in Arizona, I also verified this to support my findings. For my results I sanded using 400 grit, and cleaned with alcohol afterwards prior to paint. I applied four coats, without primer. The finish came out to be almost a flat/Satin (use pig spit if you want a bit more luster, I did not) and it came out great. I baked my guards in the oven at 500 degrees for about an hour, and rode with the exhaust painted part on the bike for about half an hour or more to get heat treated. Time will tell, but I've heard it will be great for a very long time based on everything mentioned. The end results are exactly wheat to was looking for and the coverage was excellent. I highly recommend using this over other brands. If for any reason this changes over time I will update my review, however unlikely. Good luck

Scuff on clutch cover masked pretty good. If you are trying to hit one small spot, though, it will run pretty easily. Have to use big wide swipes, like painting a car.

Stuff works great! Surface prep is key to get good results. Once cleaned, your parts should only be handled with gloves. Bake at 500F for an hour and its heat & chemical resistant (I use it on rifles, oils and solvents don't appear to phase it). Takes quite a bit of handling without rubbing off or wearing through.

Does what it says, I touched up a few minor scuffs on my Harley pipes. Hasn't melted off yet. Pipes get real hot too

Incredible paint for motor