SDSACZMU Radar Detector Mount, Rearview Mirror Rod Radar Mounting Base, Suitable for Uniden Radar Models

So far so good. Super easy to install - came with wrenches and a screwdriver. I bought it for my R8. Yes, the plate that connects to the R8 is a tight fit, but I don’t mind as it makes a more rigid fit. It came with some extra o-rings which appear to be replacements for the ones installed… nice touch…. I also used some loc-tight on the small screws for added security.

I am giving this 5 stars even thought it does not fit on my 2024 Subaru Outback. The front to back depth of the attachment bracket is literally a few millimeters too thick for the space between the mirror body and the pivot arm the mirror attaches to. So when I installed the bracket the mirror was pushed up to the point where I could only see the very top of my rear window. I was installing the bracket from my passenger seat so the steering wheel was not in my way, and I didn't notice the issue until I sat in my driver's seat to pull the car out of the garage. I drove all the way to work without the use of my rear-view mirror just to see how the mount would hold up and it is ROCK SOLID. No vibration, no bouncing or anything. I do recommend this product..... just not if you have a 2024 Outback. The mount is made very well, it is very easy to install. And the minor depth issue can't really be blamed on either the car or the mount... they just don't work together as it is intended to be installed. I have not given up yet though, I am going to see if it is possible to mount the bracket securely to the 'down' arm of the mirror. Who knows. ***UPDATE*** The mount is working perfectly mounted to the down arm of the rear view mirror! It took a little bit of stubbornness to make it work where I wanted it... but I had a feeling it would fit and it did! It looks amazing with the radar detector just below the mirror and it is completely solid. I really like how tightening and loosening both ball joints is done by one easy to use handle. I wish I bought this a long time ago.

I think this is a must have if you plan on mounting your radar detector. It keeps it out of your way but still visible, it's also very stable and holds onto your radar detector very well. It includes everything you need and even some extra screws. Installation and adjustment is very easy. It's a huge upgrade from suction cup mounts, as I no longer have to worry about it falling off while driving down the road.

Very happy with this mount so far. It's very sturdy and stable once it's all tightened down. Installation is easy for the most part, and works without a hitch with the Uniden R3 and R4 detectors. The only challenge I had was getting it to fit a 2022 Tesla Model X (Plaid, if that matters). The "stem" that connects the backside of the mirror to the windshield mirror mount on the car is very short, which doesn't leave much room to install this radar mount. And once it's installed, the mirror itself can only barely be adjusted to provide the rear view the driver needs. I had to mount it at an odd angle, and it still severely limits the mirror's movement. Fits great on a 2024 Ram 1500 and on a 2024 GMC Yukon though. Could be improved somewhat with more accommodating bracket mounting hardware for cars with a tight space between the mirror and the windshield mirror mount.

Update: just to confirm if you remove the screws to swap the radar mount connection the screws will vibrate out. I'm not sure if they can be tightened down and better but I did take the advice that was suggested in another post and I added some gorilla glue to the threads and screwed them back in. I felt like Threadlicker Blue may not be fully necessary but if this doesn't work, that's the next step. As of now, I have no reason to unscrew the connector. Update: added pictures of my finished mount with my R4. It's really an easy install, took me 20min just cause I was fiddling with the clip. Be aware that this mount is like a 1/4 of a millimeter smaller in thickness. That means you may notice your radar vibrating. I'm in a big old school Tahoe so it was crazy shaking. I added a SMALL piece of electrical tape to the clip and pushed it in, no more vibrating! Looks good!🔥 I decided to get an R4s because the R7 is not compatible with Bluetooth and range is better on the R4, just no arrow. I did not get the R4w because the price I got on the R4 was $110 cheaper than the R4w and the only difference is I have to update the software on the computer, that's only a 5 minute inconvenience thats not happening that frequently. I have a Uniden R8 and this fits super snug!!!! At first I thought the clip didn't fit as it DID NOT click into the radar. I gave it a nice push and clicked right into place, absolutely no wiggle. I bought this to test the fit as I was intending to buy a Blendmount since I already had one. However I need 2 mount for new vehicles and I definitely didn't want to buy 2 Blendmounts for $125 each ($250). Now that I know this mount will fit. I can confidently add the R4 and R7 to upgrade my vehicles. I've been using the Beltronics RX65 for 12 years and they have performed very well but it's time to upgrade and the R8 has me absolutely spoiled with the directional arrows, but the R7 software update now makes it a hand second place unit. I also like that the knob is twist to tighten and allows for multiple positioning angles. Great mirror mount to finish my installs up!