3M 2080 Series G12 Gloss Black - 5ft x 1ft - 5sq ft - Dual Cast Thick Vinyl Car Wrapping Film - Bubble Free Vehicle Sheet Roll

Excellent wrap and very easy to feel like a pro. I've used vivvid wrap and this is far superior. The shrink rate with heat allows weird curves and corner. The initial tack isn't so strong that you can't reposition it which is nice. Once you get it where you want it, put some more heat ahd squeegee it down. Very happy with it. Pic is just one panel of a color change on the BMW to a WW2 theme

I'm very happy with the quality of this product. The color really makes my drone stand out against a blue or Grey sky (important for line of sight flying. I haven't had an opportunity to scale the craft to see if it is still under 250 grams). Only time will tell if the color stays this vibrant. I had to freehand every sticker. It was time consuming, but the material was relatively easy to work with. When the time came, the stickers were fairly easy to separate from the backing and adhered to the textured surface well.

Arrived on a roll, safely packed in a box shipped via UPS. The vinyl itself looked like the color/sheen in the picture. Turned out as well as I’d expect it to based on installation experience (zero). I did three separate sections of the front end of a side by side. If possible, keep the panels attached to the vehicle, otherwise you’ll need a helper to put tension on the tough spots that merit heating and stretching. I detached the hood but was able to leave it in place for bracing. My side pieces required removal and trying to prevent the adhesive backing from creasing and sticking to itself with a wiggly substrate is impossible. If you’re a DIYer with minimal experience, not expecting perfection, and just need a color change or to protect factory paint, it’ll work just fine. I didn’t bother removing any of the factory decals so the outline is visible up close as expected. New ones overtop will improve that, although it’s barely noticeable from 10 feet away as is. Took me a few hours for B minus end result. Could have been closer to an A minus if I’d solicited help from the beginning.

So I was doing this to repair chips on my fender flare on the bed of my pickup. I had cut out a template, and then trimmed the vinyl to match. I then laid it out to make sure it was the right size.When I was going to apply it, it took a very VERY long time. If you want a smooth surface on the vinyl and you are working with something that has any curve, be prepared to struggle with this. It does not apply so easily like the little instruction card. I would NEVER attempt to use this on a whole car, it would look like crap because you CANNOT and I mean, CANNOT get a wrinkle or little bubble free surface.Don't get me wrong, it still looked good, but since I am so AR any little bubble was a failure to me. And heating it up after, does not smooth it out, and DO NOT try to heat it while applying, it gets super thin and then sticks to itself very easily, it get about as thin as plastic wrap if you try to heat it while applying.But, for my purposes, it did a good job, the pitted paint is hidden, and the lines on the vinyl will be blackened by my polish (there is a slight white line from where you cut the vinyl, and it is very clear on a black truck)Pros: High Gloss finish looks good, parts that were flat are flawlessCons: Hard to work with if you are not on flat, top layer of clear plastic does not stay on and then causes issues with application, NOT POSSIBLE to do a wrinkle free bubble free installation on any curved surface (unless you are a professional I suppose) Limited Ikea like instructions.

Amazing quality and easy to work with. I wrapped the top half of this corvette with gloss black.

This automotive vinyl film is top-notch! The quality is fantastic, and it’s incredibly easy to apply. It provides a smooth, professional finish, making my car look sleek and modern. The adhesive is strong, yet it doesn't damage the paint when removed, which is a huge plus. The vinyl film is also durable and holds up well against the elements. Whether you’re using it for wrapping parts of your car or as an accent, it’s a great choice. Highly recommend this for anyone looking to add a custom touch to their vehicle!

The media could not be loaded. Came with like 6 little rips in the clear cover, which made it impossible applying it without getting streaks in the viynl, even using soapy water, this viynl scratches by simply touching it. Worst viynl I’ve ever used, doesn’t want to bend, doesn’t get air bubbles out nicely , doesn’t adhere properly, pressure or heat does not get this stuff to stick if it’s stretched at all, needs excessive heat to become stretchable, and once it’s heated it cools down and becomes a much harder material than it originally was. It’s also translucent, hold it up to a light and light will easily pass through, making this useless for clear applications, since light will pass through it, stretch to much and it becomes a translucent black and you’ll see the color of whatever’s underneath your viynl, I’ve viynl wrapped multiple of my own cars with tekwrap an never had an issue, I try viynl wrapping one piece of a center console and it can’t bend without coming off and once it’s heated you have to keep it hot or it wrinkles up and gets hard. I want a refund, this product is a complete waste of money, I made sure the application was crystal clean, I even wore viynl wrapping gloves so my skin oil wouldn’t effect it, I’ve viynl wrapped so many things and this was the worst stuff I’ve used, thought I could go cheap, but I should have spent the extra $30 and went with the real stuff.

It is a very sticky and thick vinyl. It was a bit hard to cut on my Cricut, but the mission was successful with some modifications. Overall, I like the quality and feel of the vinyl.