Cordless Brush Angle Grinder Kit, 19500rpm Mini Electric Angle Grinding Tool with 2pcs 16.8V 2000mAh Batteries and 5-Cutting Discs, Grinder Handheld Cutter for Metal Wood

I bought it 2 months ago, first used today to sand down a door and door frame that have been rubbing and binding for years. I charged the battery when I first bought it and it just sat there until today. It worked very well, the sanding wheel that came with it did a great job after I learned to control it properly, less pressure is the way to go. Go easy you can't put it back once taken off.The sanding was on and off for about 45 minutes, the battery did well and the unit was smooth and easy on the hand, you can easily use it with one hand or 2 hands when you want greater precision. I completed the job, no more rubbing, I painted the door and frame. The results passed my wife's eye and performance test and that is not easy.This tool is fine for DIY projects around the home, it is light very portable and convenient. I don't know the limits of the batteries but it comes with two so the tool should not leave you stranded in the middle of a job. This is a multi-tool and it is not perfect for every job, for example it won't sand into a 90 degree corner but it will get you close enough.I like the tool it made my job much faster and easier and the wife is happy, what more can you ask for...

Works nice, small and easy to move around work piece. Not the atreognest thing and short battery life but handy for sure

first use, got the job done, it cut though a rusted M6 nut/bolt without much effort.it feels cheap and would most likely fail in heavy use, but that's not what it's for.nice little tool for light work where you have no access to shore power.

I bought this little grinder to help a friend in case we had to cut some metal and we had to end up cutting 1/4 inch steel about 3 inches wide off of a fixture. It worked great! It is a great value and I was afraid I was going to mess it up but it was tough and got the job done. I have only used it once so I can’t speak on battery life but it comes with two battery packs which is awesome. Even if it craps out the next time I use it - I don’t think it will - I am still way ahead for the cost. Great buy!

Batteries both fully charged and would last more than 5-8 min ea. Also very weak power. Had a hard time cutting panels made with 4 layers of 1.5 oz mat fiberglass. With a cut-all carbide blade. Returned for full refund.

Could easily be better built, and it would last a lot longer. Some people are saying it is too noisy. Others say it got so hot it stopped working in a minute. But why? I'm a mechanical engineer, and very curious, so I got one of these brand new and after noticing it is indeed very noisy, and the noise itself seems like something is loose inside, I've opened it. This thing has one wheel bearing mounted on the motor axle, very close to the end point where you attach the cutting disk. Good, it has to have one right there to provide strength as you torque the cutting disk onto the material you're cutting. But this wheel bearing outer shell is held only by the plastic enclosure, and it's loose. Even tightening the two screws really well on that neck of the tool, does not prevent the whole wheel bearing from spinning inside the tool. Spinning not just its core with the motor axle, but the whole bearing body is spinning, which causes a lot of friction with the plastic enclosure, and could eventually melt it. Fixed by adding a layer of aluminum around the wheel bearing so when compressing the plastic shells back together, the bearing is firmly pressed against, and no more noises that are not supposed to be there. The motor now runs smooth, as quiet as it runs outside the shell, and I notice no heat that would rather be abnormal. It is not a tool to run for many many minutes non-stop anyway. This is for quick jobs, run and stop, run and stop, but still, the way the wheel bearing was loose inside is not something acceptable even for a minute run. I don't think many people would be able to do this fix, and I don't recommend trying, unless you have the experience, so better just buy a well known quality tool instead. I don't recommend this tool. If this post survives, I'll get back to it and post some pictures.

Very handy! I use this to do the hooves on our goats. Take way less time compared to using cutters and less stress on your hands!! Only wish is that the batteries lasted longer and or ability to plug it in and use it at the same time.

The Zfulvo angle grinder is a good choice if you are looking for a small angle grinder.It is a brushed motor type, which means that it is relatively noisy. For my use, it works fine.The kit is composed of several cutting discs, 2 batteries, charger, pair of gloves, tools to change the disc and a carrying case.The only negative point I've noticed so far is the carrying case. The latching part to lock the case comes out all the time. It is okay because I can place it back easily.I am giving 5-stars because the device does what is supposed to do.Good value for the price.