4 Pcs 5" Black Solid Steel Floating Shelf Bracket Blind Shelf Supports - Hidden Brackets for Floating Wood Shelves - Concealed Blind Shelf Support – Screws and Wall Plugs Included

Saved me a lot of time fabricating my own, like I've been doing in my cabinet shop for years. Price per is awesome

Once these are up, they’re very secure. The problem is that walls are often not perfectly square, so even if you measure everything, you may still have to redrill because the rods may point slightly inwards or outwards. Definitely recommend loosening the screws a small amount if you run into trouble fitting the shelf in, especially if you’re on a stud.

I've purchased these back in 2021 and they are really sturdy and very good quality brackets, along with very easy to install. However, I still don't like the drywall anchors that come with the screws. They are very cheap quality and tend to not anchor into the drywall, as they're intended to do. I had to purchase different 3rd party anchors that worked 10x's better than the ones supplied with the product. Overall, it's a good wall bracket, just needs better drywall anchors IMO.

These brackets are great! They are study enough to hold these 7 foot solid cypress shelves. We used 4 in each!

These are great for shallow floating shelves. They are sturdy and and easy to use. By purchasing individual brakets like this you can customize the spacing and placement of the brackets to suit your needs. I recommend getting a longer drill bit to drill the holes in your shelf/wood-- or do what I wound up doing: either use a router or chisel to carve out space for the plate to recess into the back of your shelf. This eliminates the need for a longer drill bit and helps ensure the shelf sits flush against the wall. My only complaint is that they don't come with a small screw to secure from underneath to lock the brackets-- without them your shelf can pull off the wall if someone pulled on it.

We are renovating the kitchen in the short-term rental and wanted to add floating shelves. The drywall needed to be redone so I reinforced the area where the shelves would be and used longer screws to secure the brackets. I found a butcher block countertop that I was able to cut up and use wooden dowels create a corner shelf that would float with these brackets. Turned out great. Can't wait to see the finished product with the cabinets all done.

Solid, well built brackets. Worked perfect for the 10” floating shelves I built for my client!

The mounting holes are too far apart, and you can only get one screw into the stud unless you turn the bracket up and down. Also, these brackets are not that stable.

Se siente fuertes y de buen materia

These look amazing, although they are for a winter project, they are exactly what I need and look forward to the easy installation

These feel very good quality, will be using to fix a solid piece of wood above a fire soon

Good value and they look like they will work well

I bought these brackets to mount a couple of shelves 1200mm x 240mm x 46mm that i made out of pine to replace the white store bought hollow ones which were going yellow. As others have stated the screw holes are spaced too far apart to get 2 screws in the stud. To get around this problem i had to rotate the bracket 90 degrees so the plate was vertical which meant the plate was wider than the shelf. So i had to cut 2mm off the ends of the plate which made them the same size as the shelf so they can still be seen with a closer look but it is acceptable to me.I used a 12.5mm drill bit for the holes for which both have to be straight which can be a challenge and you will need a longer than standard drill bit.I got around the problem by drilling the holes before i put the shelf together.As others have stated not all the brackets a straight, i found at least one that was a couple of degrees off but luckily i didn't need all eight.I also didn't think the screws were long enough so i replaced them with 75mm screws that i already had, probably over kill but better than what was supplied.