KEENTECH Round Over Router Bit, 1/2" Shank, Edge Forming Router Bit for Wood, Corner Rounding (1/2 Inch Shank , 3-1/2 Inch Diameter , R1-1/2 Inch Radius)

Quality and packaging were top notch and functionality is great! Seems like a good value!

I used this 1” radius bit to make solid wood rails for a pool table of highly figured curly maple - not an easy job for a bit. I mounted the bit in my 65 year old Delta shaper and got glass-smooth surfaces. The trick is to hold the material absolutely tight to the machine bed (no vibration or unintended movement at all) and to take shallow cuts at SLOW feed. The bit arrived razor sharp and I completed the full radius in 6 to 8 passes. With test cuts in hickory and maple that amounts to well over 200 feet. The bit will need to be sharpened now for such extreme demands but is still ok for straight grain wood.

It’s a small size just to give a slight round over. Did job well. Suspect it last for good while. Likely be getting other bits from this company

Carbide ran smooth through all 4 corners of 181 each 4"x4"x8" pine timbers. Still sharp and ready for more.

I used for a limited project on very soft wood - cedar. Don't know how it would hold up on hardwood. The top name brands would cost much more for the same bit, so for my purposes this worked well.

It gave a nice clean cut, which you would expect from a new bit. Like all things time and use will tell. Anyway, Thanks Keentech, the details in any project is where the art resides.

It was to large for the job I had ordered it for so I returned it

Very low quality cutter. All my other cutters ate great in my router. when I ordered this one it chattered and left a very nasty finish. I believe it was manufactured badly. Sent it back for a refund.

Quality bit