J4025M Intel® Dual-Core Processor J4025 (Up to 2.9 GHz) Motherboard

Pros: 1 - Dead silent 2 - Runs cool 3 - Easy assembly 4 - Fast 5 - Inexpensive Cons: 1 - Driver issues 2 - 1080p playback 3 - Board layout Comments: First, it should be noted that this board does not work particularly well with 32 bit Windows because Intel hasn't bothered to fix their 32bit drivers. Neither Asrock nor Microsoft are at fault here. The good news is that 64 bit Windows works perfectly. FYI, some Intel NUC computers have the same issue with 32 bit versions of Windows. Dropped frames on 1080p playback with fast moving scenes are noticeable but it's acceptable. Do not however plan to use this as a HTPC or you might be disappointed. Experienced system builders will not like the fact that the SATA ports are along the side with the front panel and USB connectors but again, this isn't enough to merit a deduction of rating. Overall, this is a low end (by current expectations) motherboard but it is excellent for daily computing tasks or NAS. Two years ago a motherboard with this speed and capability at this price was inconceivable. The added bonus of being a fanless design makes it even more attractive as a time saver from a builders perspective as well as the obvious benefit of energy saving. Since I was under a time constraint, I did not do any in-depth testing but it did successfully boot and run OpenSuse 13.1, Linux Mint 17 and Ubuntu 14.10. Not surprisingly, the Linux distributions did not exhibit driver issues as did Windows 32 bit. Last, Asrock deserves a compliment for the excellent BIOS on such a budget board and particularly because you can update without an operating system loaded. Fantastic! Keep price/performance in perspective and don't expect AMD FX or Intel Core performance. For the price of a single stick of 4gb of DDR3 this is no doubt one of the best values in computing.

I purchased this to go into an ANTEC Aria Case. Would also like to run Ubuntu and the box will be principally a repository for photographs on a home network. The board is small; will fit nicely in the Aria Case. BUT... There is a parallel printer HEADER on the board - and no place for a parallel printer port on the back panel supplied with the board. I haven't seen a parallel printer in over 10 years. What's that all about? Also a TPM header which I read that someone in 2008 didn't know what that was for. I still don't and don't care. Now we come to the COM header on the motherboard but no jack location on the rear panel. Now I understand that there may have been a need for these two headers/ports (whatever). But not in this century. While some may see a need, I consider these obsolete technologies on an otherwise useful board. Could have used: 1. Another USB header to connect a Card read (useful these days) 2. Another SATA header - I will have 3 drives in this box and there are only 2 SATA headers. Researching other low power micro-atx boards, this still seems to be the closest to what I was looking for. But if the card reader doesn't connect, it's going back. Update... Card reader works... not problem. Still don't know why I need a serial header, parallel header, or the TPM thing. Has enough USB ports so that I will never need an external hub. Good board. A few wasted frills. No problem.

Well this was a most pleasant shock. Given the price, I expected very little. Really I hoped it would run Win 7 64 bit well enough to do some basic surfing and Office document work. After setting it up with 8 gigs of 1300 mhz RAM and an older HD 5950 video card I had laying around, this little guy is far faster than my most optiimistic hopes could have been. It's is quite competent for everything I have asked, including mutli-tasking, graphics editing at hi-res, running DVD's and digital copies of movies without a ripple. I am not a gamer, so I can't comment on that genre, but everything that I do yielded wonderful results. I will most certainly buy this again and recommend it to my friends. The PRODUCT DESCRIPTION says max RAM is 32 GB, but the top of the page reports 16 GB total. My motherboard manual also spedifies 16 GB total of 1333/1066 RAM. After months of use, I still love this board. This far exceeds my expectations and offers a VALUE I have not seen in a VERY long time.

I bought 4 of these. Of the 4: 1st: the first one never worked. (Sadly it took longer than the return period for me to discover this.) 2nd: Unstable. HIGHLY unstable. If i'm lucky, I i'll get 10 hours out of this one before it freezes. 3rd: After a lot of bios configurations / kernel hacks, this one actually worked well... for about 6 months. Starting this week, it is now the same status as the 2nd one. It freezes somewhere between a few minutes and a few hours. 4th: Currently stable, but took a lot a configuration guessing (just like the 3rd one). But I have very little faith that it will be stable for very long. At first, I was very excited about these. They are not very powerful, but I was fine with the power they had. (when they work, they worked just fine for me.) In the end, I spent many, many hours debugging, swapping parts, and tracking down what parts of my builds went wrong. (in all cases, it was this motherboard.) How this product has so many good reviews is well beyond my understanding. If I had known that I would only have 1 good working computer in the end, I would have bought a single, much nicer motherboard. I bought these to save a little money... They turned out to be a huge loss in terms of both money and time! At this point, I have decided to cut my losses, and move on to something more stable.

Probablemente no he hecho una compra más eficaz en mi vida. Esta placa lleva un mes como sustituta de la anterior en mi servidor de archivos casero. La nueva generación de procesadores Bay Trail de Intel consume una cantidad de energía ridículamente baja, por lo que es perfecta para estar encendida 24h/7d. Además, este modelo de placa dispone de 3 slots PCIe, imprescindible para mí (OJO: el slot x16 sólo incluye pistas x1, por lo que probablemente una gráfica discreta no funcionará). Además, pude reutilizar mis memorias DDR3 normales de PC de sobremesa (la mayoría de placas Bay Trail sólamente soportan SO-DIMM), y la inversión fue mínima.

pour moi NUL

Excelente, me permitió la instacion del Windows 11, y tiene muy buena respuesta.

Running mine as a Windows 2012 R2 server for Plex and general data storage needs. It has been been fantastic paired with a raid card. Handles 1080p x265 encoded Plex streaming without issue.

Das Mainboard war zufällig vorhanden und habe es gekauft.