2 Pack iHalo Blue 120mm Case Fan Cooling PC and Light Up Computer Case with Cool Look, Long Life Bearing with DC 15 LED Illuminating PC Case. Quiet Durable Fans Enhance Performance of Tower

Fans arrived with screws and screw driver (included). Quarter, penny and 6" wrench added for reference. Both large and small power connectors.12 Blue LED strip around the inside. Blue rubber mounts on both sides are a tad higher than the frame for sound/vibration isolation. Nice touch!Provided 1/2 inch screws for mounting through chassis to fan frame. Fan frame holes go all the way through the frame so longer bolts can be used.Quite operation like soft speaking. I'm adding fan to water radiator( "AGPtek® 12 Pipe Aluminum Heat Exchanger Radiator" on Amazon) for cooling.Large power connector is MOLEX "pass through", only two are wired through. Other two are blank. Still no outlets are lost.Small connector 3 PIN IDC female so no fan speed control. 12V DC 42 CFM @ 1,000 RPM Wires in back on air output side.Sturdy durable frame. I like it. Would buy again.

These fans are great! They have rubber mounted to the corners to prevent vibration sounds. They come with the screws. They come with both possible power connectors. And each connector can have another connector connected to it in case you only have on available connector. And, it included a screw driver.The LED lights illuminate the interior of the case and are brighter than I expected. They produce a powerful, brisk airflow.I first tried using the fans of a very well known company but they produced a horrible vibrating hum. No matter how I tried to cushion them, nothing helped. These fans worked better than those ever did.

I'd like to say first that I've been building computers for a very long time, and that I have tested these thoroughly.I can confidently say that they are awful for an AIO or a custom loop. My CPU is around 8-10c warmer when these are running because they have poor static pressure.With my EK Vardar 120mm fans, my CPU sits around 62-68 with a full load. I get very similar results with the high static pressure corsair 120mm fans I have, and the ugly Noctua fans I have.These, however, have my cpu topping out at a concerning 78-80c.This is with the fans at full speed 100% of the time.This is on an i7-7700k(5ghz) at 1.35v on a Maximus IX Apex with an EVGA 240mm AIO. This same test was also done on a ROG Strix Z270E Gaming and a brand new MSI Z270 Gaming Plus.They are not bad at all for simple case fans you need to move air over your system, or on a larger heatsink type cooler, such as a 212 evo or a Noctua DH15. They just can't compete against the more established and trusted brands.Don't penny pinch on fans when you have a high end build.

I just received these in the mail today for my current PC build. The build quality is pretty good. I particularly like the rubber around the screw leads. This is a much better design than just having plastic given it reduces any vibrations you would see from the fans.Pros:- Rubber to damper any vibrations/noise.- Great build for the price.- Dual connectors for optional use.- Easy install.- It actually came with a Philips screwdriver.Cons:- None.

Less than two months after these two, one of the two has gone stopped working. And I don't think I installed these more than 4 to 6 weeks ago. So ya. I no longer see the return button and yet one has failed me. Not cool.

Your browser does not support HTML5 video.  My Alienware Area 51 7500 MB died on me (a 2nd board). So, I built an entirely new gaming rig. Since I have a see-through case, I needed to show off the components inside. Plus, my computer room has a mixed appeal of Spencers and Toys R Us, and Comic Cons. I collect everything sci-fi related. Now, my new rig has the sci-fi look. These fans are super bright, and are super quiet. These are a must-buy. Check out the photos and video.

ONE of these fans were installed in the alternate CPU fan header and both the LEDs and the fan work just fine. However, the other one of these fans were installed in the case fan header on this motherboard and ONLY the LEDs light, but the fan does NOT run at all. If I find out why I will change this review to five stars right away. Until then, I would welcome feedback from anyone as to how to address this issue.Apparently the fan was connected to the incorrect fan header on the motherboard. The fan itself works just fine and I would not hesitate to purchase these fans again. They look great and run very quietly!

I got these from the Lightning Deal. So it was an even better deal. I bought the blue version.The blue is more closer to the turquoise color than regular blue.I found the led lights are affected by voltage if you use the three pin connector. So if your computer drops the voltage to the fan to slow it down, the led will get dim or shut off. I fixed this by adjusting the motherboard fan control to always give at least 80% voltage. This amount kept the led bright and didn't make a lot of fan noise.Overall a good buy if it goes on Lightning Deal again.