Pearce Grips, Grip Extensions

I am happy to report that the extensions made for the Ruger LCP do in fact fit the new LCP II.The Pearce extension is longer than the factory Ruger extension and slightly shorter than the "female" Zeeshy extension. Quality is noticeably higher with the Pearce extension compared to the Zeeshy extensions. Unfortunately. the Pearce extension was just not long enough for my fingers and ultimately I liked the Garrison extension best.I have attached a photo comparing all of the extensions I could find.

I love my Glock 27, it's my go-to CCW handgun. But if I could change one thing on it, I would have made the grip just a tad bit longer. Every time I'd grip the pistol, my pinky would just hang off the bottom. Made for a very awkward feeling grip. I was almost used to the way I had to grip it, then just happened to see this. It makes a big difference! My whole hand fits on the grip now and it makes for way more comfortable shooting.It's a breeze to put on, too. Probably took all of 5 minutes and most of that time was spent trying to get the bottom plate off of the Glock's magazine. Guess now I can't blame my bad shooting on not having a proper grip on the handgun.Edit:. Even though I already have one, I had a second one on my wish list, but seeing how nobody else seemed in any hurry to get me one, i broke down today and bought another one, myself, for the extra mag I carry. All in all, they make a big world of difference in grip and I'm so glad that I found them. They are really worth the money. And since I usually wear loose fitting clothing, they really don't make that big of a difference as far as concealment goes. As long as my pinky now has somewhere to rest and it throws rounds into the chamber properly, I'm happy. Really nice product, in my opinion.

The upper lip of this (where it meets the bottom of the pistol grip) is too high to seat a magazine in my M&P Shield without slamming it VERY HARD upward. A normal whack with my palm or even one with double and triple the effort causes the mag to bounce right back out. I solved the problem by removing a little at a time with a sanding block and 80, then 150 grit sandpaper. I only needed to remove maybe .75 - 1mm to reach the magazine catch without forcefully crushing two pieces of unyielding polymer together. If not for needing to modify it to fit the stock firearm it was designed for and being a little loose fitting I would have given it 5 stars. I've bought these for other pistols in the past and it always makes a HUGE difference. Bringing that pinky into play instead of hanging there useless with a short grip is like shooting a totally different gun. you won't be disappointed.

The clip that came with my Glock 42 had no extension on it. The gun is a smaller gun and without the extension my pinkie finger would not be on the handle at all. I don't like that kind of a grip so an extension is a must for me. I had purchased a separate Glock brand extended magazine and it worked fine, however I was still stuck with the original magazine and didn't want to just throw it away. Thankfully I found these grip extensions from Pearce. Using just a paper clip, I was able to take off the bottom of the standard magazine and add this extension to it. It functions perfectly on the gun and I have shot plenty of rounds with it. I even like the look of these extensions better than the plain smooth look that came with the Glock brand extended magazine. You can see in the picture I've added to this review, the Glock brand extended magazine is on the right and the standard magazine that I added the Pearce extension to is on the left. The pattern on the Pearce extension matches the pattern on the rest of the gun handle.

I purchased this XDS grip extension to use with my XDS so that I can get a little bit better of a grip with the standard 5 shot magazine. This grip does exactly what it is meant to do and even looks nice to boot. It was very easy to install and feels great in the palm my hand. My only drawback is that I use my XDS strictly as a conceal carry and this does add to the profile of the XDS showing a print. It's not overly noticeable but it is noticeable enough that I have decided to go without this for the time being.

Let's face it...you have a Keltec P3-AT with an Armalaser TR1 because you're a thinker. You want a reliable pistol but realize that, because the likelihood you'll actually need it is probably low, you want your entire handgun to weigh less than a can of soda (fully loaded) so that everyday carry is super comfortable and not a distraction. In addition to the TR1, you also got your P3-AT decked out with some must-have accessories including an Allen (size 46) holster that fits comfortably in your front jeans pocket and of course you purchased this Pearce Grips PG-380 grip extension for comfort. Since your medium-sized hands really don't give you a great purchase on the P3-AT's 6 round factory magazine (and those 9 round magazines are too long for pocket carry), you've realized this PG-380 extension is the perfect extension for that 2nd finger support and actually works to push your 1st finger into the proper position to enable the TR1 laser to fire more consistently when in use. Yes my friend, you've made some good choices and you can pat yourself on the back for being prepared AND comfortable.

I bought this to use with my taurus tcp 738 with stock mags. The summer months are here so i can't carry my 45 nicely with shorts. Changeout was pretty easy although they are smooth when you get them. I added some stippling to mine just for the added grip and i'm amazed at the difference in the control it adds to a little mouse gun. Adds minimal if any extra printing which is barely noticeable. Will buy again if i ever pick up some spare mags!

je voulais un pistolet pas un bout 😂😂

Ho acquistato 2 pad per aumentare il grip dell'impugnatura di una nuova Glock mod 42.Perfetti, calzano a pennello e permettono di impugnare correttamente e saldamente l'arma.L'installazione (tutorial Youtube) è semplicissima.Prodotto come da descrizione e velocità di spedizione superlativa.

These are just right for smaller gun grip, they give you that extra space for your little finger, without adding extra rounds (Canadian laws)makes it look a whole lot nicer too (see my pics)fits on glocks 17 (regular ones everyone has including KelTec sub 2000 pics were taken with it on a KelTec sub)My mags were factory Glocks so i don't know if they would fit on KCI's, i dont have any of those, but it's just an insert that slides on and blocks with the pin under the mag.Hope Amazon gets more of these soon i got the 2 last ones and i need more.EDIT: Got 2 more it took a bit of time but now all my 10 rounders have that grip extension, very happy with them makes a world of difference with smaller grips. Highly recommend.

It’s just a grip

Nice, worked good

An absolute must for Glock 19 mags with XL hands

Strong plastic, using to extend hand grip

Perfect for a G19 to give you the ultimate grip and retention.

Perfect.

Makes the G-19 grip just that pinky length better. Easy fix.

Right price , easy to install and fits well.

Great product, fit well and improves the look & holding grip.

Great product, very easy to install and make a big difference in the grip

Must for Glock 19 if you have big hands

They fit good... thanks