Premium Cold Water Gasoline Pressure Power Washer Cleaner Replacement Axial Pump for AR RMV2.5G30D 3000PSI 2.5 GPM 3/4” Shaft Brass Head Simpson, Briggs & Stratton Etc.

Just replaced the 2.9 gpm 2300 psi pump on my Generac model 01292-0 power washer with this unit. Bolted right on to the 6 HP Briggs and Stratton engine and was working in minutes. It was a lot smaller than the original pump and I worried that it wouldn't do the job. After several hours use cleaning my deck, fence and lawn furniture I'm very satisfied.

Better quality than what came off, which had managed to break off a fitting with very little stress.Bolted right up....extends out from the block slightly further, which is not a problem.Makes good pressure.

Good fit, good pressure. Mounted it to a 212 c.f. Gasoline engine for my mobile pressure washer. Fast delivery, good fit, put me back in business for a small price. Don't know how long it will last, but at the price, I can buy another for a backup when this one gives up the ghost. Don't know the actual pressure of discharge, but it takes barnacles off boats. Good value if it lasts a year under professional use.

Worked great

The media could not be loaded.  Replaced my broken pump on a Briggs & Stratton pressure washer. Working great!

I bought the AR RMV2.5G30D 3000PSI to replace the old pump on my Generac 1292-1. I couldn't use it right away as I needed more parts. In case this helps anyone:- The old pump had a smaller male connector for the pressure outlet, so I had to get a replacement 3/8 in. Female Quick-Connect x M22 Connector- There was no room for the old pump's 4 hex head bolts, so I had to get 014973308094 Fine Socket Cap Screws, 5/16-24 x 1, and a 1/4 inch Allen socket wrench- Anti-seize coating for the shaft and 4 bolts- Pump Saver, I like to use a short burst after each session as preventative maintenanceAfter I got the new parts and everything installed, it's worked like a champ.

good price and quick delivery

I have a 5 old year Harbor Freight pressure washer. It bolted right up but my bolts would not work with this pump because the bolts had a built-in washer that was too wide to clear body of the pump. I went to the hardware store and had to use Allen head type bolts for clearance issues. Once I got the bolts it bolted up just fine. I see in the pic of the pump they show it bolted up using the exact type of bolts I had to buy. Maybe they should include those bolts. Also, NO owners manual, NO instructions but if your handy with machinery you should easily figure it out.This thing REALLY puts out the pressure. Now I have to kind of balance myself before pulling the trigger on the wand so I don't fall. My old pump didn't have near this pressure. I can also tell the little 6.0 HP motor works a bit harder with this pump. Really puts a load on the engine but it works great. I would highly recommend.*** Update *** Pump quit after less than a years use and I do NOT use this pressure washer that often. Found out only has a 30 day warranty, Garbage.