Haotian Tilt-Out Bathroom Laundry Cabinet Hidden Hamper Organizer with Double Baskets and Drawers Storing Unit Storage Chest Cupboard, White BZR33-W

Don’t be afraid of the negative reviews, I put this together alone with a Phillips screw driver! Because so many complained about installation I was cautious, and I will agree with others that Deon’s video about the drawer runner installation was immensely helpful! Thanks Deon!The parts were all labeled, as was the hardware, and if you are a “who needs directions” person you may struggle, as the drawer fronts (for one example) are marked one for the left and one for the right, they are not interchangeable which may have caused some of the confusion. It’s super cute and sturdy, I’m thrilled with the outcome!

Every complaint about the assembly is true! I am very experienced with these kind of furnishings (Walmart, IKEA, Amazon, etc) Directions are poorly written and leave out crucial details. There is a right and left drawer and tip out, but they aren’t marked! Assemble and if they don’t line up, try swapping. Set aside a few hours and be prepared to undo and redo steps. That said, once fully assembled it is pretty sturdy, especially when against the wall. Finish is decent and blends well enough with our cabinets. Bins look very small but hold more than you’d think. (4 pairs of mens jeans, 5 Tshirts, misc socks and boxers in the picture for reference.) Overall it’s an improvement over the old hamper and we like it. I took off a star because it’s a bit overpriced compared to comparable items and those gawd awful “instructions”! There’s also a strong chemical odor but it dissipates over time.

It's very functional, the draw sre very hard to put together, but ofter puzzles and put it together it very nice and functional , the basket are small , so me add 2 more basket to it ofter the frist to gets full so it's works for me .

I love the final product; however, to get there was a challenge. First when we laid out and organized all the parts we were missing the support dowel but my contractor husband when and bought a broom handle and cut it down. I bought this thinking I could put it together by myself because my hubby was out of state for two weeks. Sadly, I couldn’t. I had to wait for my hubby to assemble. He said the directions were not for someone who is a novice.

Durable, make more spaces in your Loundry , looks great

Poor quality, directions have not the first wording and small pictures when trying to figure out what holes to use especially on building the drawers. No where in the product description does it share you must mount to make it sturdy so the doors are stable to open forward!!! Not worth the money the hassle is real on building it. Almost lost my Jesus on this one🤪

Assembly was an absolute pain in the butt. It took two evenings and three people. It’s a shame the manufacturer didn’t include a full video of the process because it’s very very complicated (there is a QR that leads to a short video but it was absolutely no help). Expect to have to undo certain steps and redo them. Expect for it not to be intuitive. Expect to follow the directions and still need to drill your own holes in certain areas (we had to do this for the laundry cubby on the right. The pre-drilled holes were about an inch off).There are two reasons why it’s so complicated. First, there are a zillion pieces and a lot of them look very similar but are not interchangeable. Pay close attention to which piece will go where (left/right, front/back) before you start screwing things in. I had to swap both the drawers and the laundry bin cubbies because I’d had them in the wrong place, but that was a relatively easy fix. (If you look close, you’ll see that on one side of each door is slightly longer than the other side. The sides that go in the middle of the cabinet are shorter.)The second reason we struggled so much was because the images in the instructions are very small, particularly the “close ups” on the metal sliding pieces that attach to the drawers. A magnifying glass would have been helpful. These pieces should be attached to the cabinet so that the hole that is vaguely arrow-shaped faces out (as opposed to being on the underside) and points towards what will eventually be the front of the cabinet. (Again, pay close attention to which piece of the cabinet you’re drilling the slider into to make sure the slider is facing the right direction. You may have to look ahead in the instructions to verify.) You’ll also need to ensure you screw these pieces using the right hole on the slider itself, and note that it will NOT be the same hole for each piece OR each side of each piece. We had to redo these several times, and even when I was sure it was right, it wasn’t.Now that it’s finally together, it’s pretty nice! I had been worried by how wobbly it seemed before it was fully assembled, but it’s fairly sturdy now. The drawers and doors don’t line up perfectly, but it’s not something you’d notice unless you were looking for it (and truly I’m just happy to have completed it after two evenings of work!) I was disappointed that the laundry cubbies are so small. I think it will be fine if you plan to use this for lights and darks, but I had intended to use one bin for clothes and the other for towels. I think a bin that is a couple inches taller but not any wider would still fit just fine, so I’ll look for one and add a link to this review if I find one (update: I found one! It’s slightly too big, but that actually helps keeps the bins from falling too far forward! link: https://a.co/d/8hmFTRX). A positive I wasn’t expecting was that the cabinet comes with hardware so you can mount it onto the wall to keep it from tipping over.Here’s hoping you have an easier time than we did!

Thanks to this purchase I now have an honorary degree from MIT in engineering. Thanks to Deon's video... he was a life saver!! The directions are pretty awful and vague. But, once you have assembled, disassembled, and reassembled a few times it does come together nicely. Pay attention to the pictures! When it shows a numbered piece on a specific side, that is indeed the side it's supposed to be on. It doesn't make sense... both sides are the same dimensions, but trust me and everyone else... there is a left and right side. If you goof and get the wrong numbered piece on the wrong side this thing WILL NOT come together properly. I came up with cuss words I didn't know existed. It took me, my sister, and a bottle of wine to beat this thing into submission. I know deep in my soul when they wrote the directions for this they laughed and laughed and laughed. Be patient... watch Deon's video... it helps. Once it comes together, it's a nice piece. God Speed.