LINKITOM12pcs Ultra Slim Sync Feature Surface Mount LED Emergency Beacon Hazard Warning Flashing Strobe Lights with Waterproof Controller and Long Heavy Cable for Car Truck Vehicle, Amber/White

The media could not be loaded. Originally I had issues with this kit. Not with the lights themselves, but the length of the wiring. So I ordered some extensions from a different company which did not work. I couldn’t find any extensions from this seller for the lights. Once I figured this out, I contacted the seller and they made everything right and sent out the correct extensions I needed. Will be installing soon and updating once installed.Update: I’ve since installed these lights and they work great. Had them on for about 2 months or so now and there’s no water in them and they’re very bright. Exactly what I needed for my truck.

I got these while working for a flatbed trucking company and had plans to mount these on the 2019 Yellow Peterbilt 389 I drove, however I ended up leaving the company so am sitting on these until I get my Kenworth W900. The lights are crisp and strobe just how I like. I can't WAIT to get these mounted and running, my truck will be the envy of all the other drivers out there.

Wires could be longer. But otherwise not bad for the money

I wisj I would've read the reviews before purchasing. I installed the 12 light kit on my truck. 3 of the lights never came on. While I was trying to find the problem, another light went out so, now 4 of 12 lights not working. Product is absolute JUNK. I took everything back off of my truck and sending back for a refund!

...the controller box leaves a little bit to be desired...I ordered a 4-LED set by Linkitom about 3 years ago... I had to replace 1 light a few weeks ago, but otherwise they're still going strong... They are REAL attention-getters, and have [possibly] saved my life a few times... When I saw this 12-pack listing, I jumped on it... I haven't installed them on my Kenworth truck yet, but I have lit them up and put them thru their paces on the bench... It really is a GREAT set of lights, but they're NOT without their problems...This review centers on the wiring of the controller box... First, in one of the pics in the listing, the 12 wire leads are exiting the box individually, and the box is printed as such... Nope, all 12 wires exit the box as one round bundle and no labeling as to LIGHT#1, 2, 3, 4, etc... I had to open up the controller box to see how the wiring was actually soldered to the circuit board... THAT opened up another can of worms, for me anyway... There are 6 pairs of solder joints (+ and -) for 12 lights... Each pair of solder joints controls 2 lights... Maybe I'm nitpicking, but it seems like a "cheap-out" solution to me... The system would have better randomization of flash patterns if each light was controlled independently... Speaking of flash patterns, I've only got 7 + OFF, not 13 like the listing states... And OFF ISN'T A PATTERN... OFF didn't need to be programmed into the system, because the wiring itself has an OFF switch... Go figure...And another nitpick: half of the power wire has brown and blue wires, and the other half has red and black wires... Makes NO sense... pickpickpick...This controller box is a LONG WAY from well-built... The circuit board is just slid into slots, not attached in any way... I hot-glued it in place... Also, there is NO way it is waterproof... It's just 2 stamped-steel endcaps screwed to the aluminum housing - no gasket, no sealer, no nothing... Water is notorious for seeping into anything that isn't properly sealed... So, I hot-glued all around the edges and screws... This box will be mounted under my front fender, near the shock mount... I sealed it because I needed it to be sealed...LINKITOM, PUT SOME KIND OF SEALER OR GASKET IN YOUR CONTROLLER BOXES!!!!!Other than all that, the system does work very well... The light cables are detachable with 12 WATERPROOF connectors, and they're much thicker in gauge than the other 4-LED system I have... They did RIGHT with the light cables, but they fumbled the ball on the controller box...UPDATE: Again, the controller box... Maybe somebody can explain to me HOW TO GET THE LITTLE CONTROL POD THRU THE FIREWALL INTO THE CAB OF THE TRUCK WITHOUT CUTTING A HOLE THE SIZE OF THE POD??? It's hard-wired to the controller box... And that thing CAN NOT be inside my truck with 12 thick wires exiting out thru the firewall... NOT HAPPENING!!! THIS IS A COMPLETE JOKE!!! I have to UNSOLDER THE WIRES from the pod, finish my install of the lights and wiring, and solder the control pod back together INSIDE THE TRUCK... OR CUT THE WIRES, AND SOLDER THEM UNDER THE TRUCK... THIS IS A 110% JOKE OF A COLLEGE GRADUATE'S DESIGN TO SAVE HIS NEW BOSSMAN $.003[¢] on plugs that he/she think customers don't need... FIRE THAT ONE LINKITOM!!!

Pretty good set up. Although the quality isn't that great. Within a week's time some of the lights have already quit working on a customer's car that I installed these on. These would be okay if you're on a low budget. But if you want to hire quality set up then I would go a different route. Just being totally honest.

These service lights are actually pretty cool. Right off the bat I want to say if you need some service lights on a truck for snow plowing or anything of that nature or any other reason why you need these that these are pretty darn good set and well worth asking price. The quality of these lights are pretty darn good and similar to a lot of the higher and rock lights and stuff that they have out. So far I haven't had any issues with moisture getting into the lights or anything. This cake comes with pretty much everything you need to get hooked up and ready to rock and roll. The controller module for this thing is kind of weird looking but that's because of all the different ways you can have the thing blinking and whatnot. There's tons of Lights in this kit so you have tons of options for mounting lights in your grill on the side or on the back of your truck or wherever you want them. These things like all the other things that I've installed on my car kind of like the underglow and also Rock lights and things of that nature definitely going to take some planning out to get them right and especially if you want a nice clean professional install they're going to take you at least an hour minimum or maybe even more than that if it's your first time installing it and if you're not very good at wiring and routing wires in an engine bay it's definitely going to take some prep time. Overall I think these go super great with my magnetic service light that I have on the top of my car and then I have two on the inside of my windshield and these in the grill and the side of the car so pretty much the whole damn car is flashing like crazy for a snow plow so there's definitely no issues with me being not seen. These things are 100% worth the money and the quality is pretty darn good and they're easy to hook up so I highly recommend them