HARDELL Cordless Mini Rotary Tool Kit, 5-Speed with 69 Accessories, USB-C Rechargeable 3.7V, for Engraving Sanding Polishing Carving Cutting Drilling DIY

I purchased this rotary tool/dremel to help me modify my glove box to fit a GPS information screen in there. The blade attachment worked beautifully. It did occasionally stop and get stuck but that was my rushing it. I then used other attachments to fine tune and smooth my work. Later I found it can can used to polish and grind the chipped blade of a utility knife. I was able to delete the chips. I am amazed at the uses I can forsee for this, including the polishing of jewelry. This was a rousing success. I chose this over other sellers because of the work light, the color, the saw blade attachments, the power, the speed, and the price. I didn't really test the battery life because when Ireted the tool, I plugged it in because I didn't want to run low on power in the middle of my task. I found the weight and balance to be perfect and not distracting. Thank you Hardell.

I bought two of these, the price is half of of the other brands & I’ve had great luck with Harrell rotors tools, it comes with a light that’s very bright, & helps seeing what your doing, it feels great in your hand & is extremely quiet, until you put but to wood, this model runs when charging g, so when the battery does die, it’ll become a hordes tool, I use it for very fine detail work, if you push the tool to do heavy work that it’s not designed for, this model protects the mot Fir from overheating ‘ cuts the power to the motor, it does restart immediately sfter shutting off. It’s built well, & runs like you paid 3 times the 15.00 that it cost, pkus, it’s presented in a very nice case that’ll probably out last tht tool, alone with an impressive assortment of burr bit, saw blades, sanding tubes, & much more, buy one, or teo like I did before this little rotors proves itself & goes up in price..

I am an egger. My hobby is making ornaments from goose, emu, ostrich, and even chicken eggs.To do this, I often use a rotary tool to cut doorways and holes in the eggshells. As a result I am always looking for a light weight, easily handled rotary tool, and it does not hurt if the tool doesn't cost a lot. This tool works for me. One thing that I like is that Dremel collets work with it. This means that I can use bits from 1/16" to 1/8" This is not a heavy duty tool, and I broke the first one I bought by over working it in a project that was too heavy, But the price was so good that I could easily replace it and get a couple spares, just in case. For light projects like cutting eggshells, it is excellent. It has five speeds and runs smoothly with little vibration. The handle is slim and easy to control. For small handcrafting projects it is a handy addition to my toolbox.

I make polymer clay earrings and this tool is amazing to drill my holes. Love that it is lightweight, rechargeable and came is a nifty zip up case.

Bought it for my brother to use, so far it works amazing! It's worth the price exactly, not as great as bigger drimmel tools but it works for what you pay for.

very low power. Good for small projects. LOTS of assorted bits for many different purposes. Handy to keep in drawer for simple tasks

Perfect craft dremel. I didn’t want a huge one as I didn’t need such a large kit so I settled on this. It’s nice and strong and perfectly rechargeable. Love all the bits included as well! Comfortable to hold.

This tool is fantastic! I bought it for a particular costume project and we ended up using on the same project in three other ways. Definitely a wonderful item to have in your toolkit!

Works as advertised, but my biggest disappointment was for the drilling function. Even at its slowest setting, the rotation is too fast for the drilling starting point. And when trying to drill something very small you need precision which is exactly what you do not get when you go from zero to fast rotation - The drill simply jumps off the item and can be dangerous if you are holding the item in your hand and the drill jumps to one of your fingers. It would be perfect if it had a pressure sensitive trigger/rocker like full-sized drills where as you pull further on the trigger it would gradually increase in speed. This would make it perfect for all uses it is advertised for.

I've been wanting a little rotary tool for a while now, and the big-name brand ones were a bit out of my price range for what I was looking for: a cordless rotary tool with some attachments and options for more, to be used mostly for my own hobbies and lightweight crafting. It's turned out to be SO much nore than just that, and I'm still figuring new things out every day! What I'm most thrilled about is the battery; even when I haven't fully charged it (and it being a USB-C port is perfect) the battery just lasts and lasts. I'll be working for several hours with it on anything from low to medium power without needing to plug it in at any point, and I simply have not worn the battery out yet at any time! I've purchased quite a few extras to go with this base kit -- different grades of abrasive sticks, Dremel polishing oil, a whole lot of different sizes and shapes of wool and other polishing tops -- and everything has been completely compatible with other brands, no problems! Just keep an eye on the bit shaft diameter and you'll be good to go. The little case is cute and I thought I'd have the tool in there, but instead it's proven far more effective at housing polishing grit, glass abrading bars, the instructions, both little boxes of bits and drill heads... it's great! At this point it has its own little toolbox to keep current projects contained and vaguely organized, but the rotary tool itself is very rarely there as it's become a mainstay of my desk. I have some big-load power tools, but I honestly find them far too strong and unwieldy for precision work. I'll use them if I need holes drilled into 2x4's, but for removing burrs or excess glue from a model, or carving softer stones (calcite and jasper are so soft, just the wool heads will carve them), polishing copper and silver until they sparkle, or grinding in some texture to make superglue catch better... I'll go for this tool every time. I might eventually get a stronger one, but for now I keep finding new things I want to do with this! It's also so lightweight that my hand doesn't get tired, even after several solid hours of carving. After all, you don't press hard -- the edges of the bits do all the work for you. All you have to do is keep it steady and guide it! I really couldn't be happier or more satisfied with this purchase. If you're on the fence or unsure about a more expensive one, this is a great intro tool with a ton of available accessories that make it incredibly versatile!

So easy to use and the perfect size.

cet outils est tres bien pour des matériaux leger tel que pywood 1/4 ou panneau de particle leger. Batteir assez longue durée

For the price, this tool is amazing. While not as full featured or as powerful as a Dremel or similar brand tool, this gets the job done for most purposes. My only complaint is my problem, and is not a problem based on any advertising. It is only mentioned for potential customers. The device is not compatible with all Dremel branded accessories, such as the metal cutting wheel. It's just slightly too small, within a millimeter.