13"OD x 3 1/2"ID x 1 1/4"P Traditional Thermoformed PVC Ceiling Medallion (Fits Canopies up to 7 1/2")

I've used a few of these now and this one is by far my favorite. Having to replace and cover up slight imperfections from others in the past, this one is slightly larger which allows better access to the screws close to the ceiling. Smaller ones are a real challenge without special tools like an offset screwdriver. I'll be getting more of these as I work my way through the house and upgrading the rest.

I needed to cover some discoloration left by the old light fixture on a textured ceiling. I wanted a very minimal medallion and it wasn't easy finding that in this large size. I needed it in black but a hit with spray paint solved that. It went up just fine and is doing exactly what I need it to do.

Metallic dark bronze is actually a tan color

Saw some reviews talking about poor quality and was a little discouraged but still tried it. Yes this is a thin plastic piece but honestly that makes it very versatile for wanting an easy and lightweight fix. Was able to put this up easily and it fit right under the 5.5" light base I had. Used caulk to get a finished seal and it's perfect! No fake wood grain texture like I was seeing with so many others too.

Just very thin plastic. Did the job, but not nearly as nice as the foam ones.

A thicker plastic with foam backing makes it fit snug against the ceiling - no drooping.

Oh boy, where do I even begin with the Ekena Millwork CMP16TR Traditional Ceiling Medallion? Buckle up, folks, because I have a tale to tell. This seemingly innocent decorative piece turned my home improvement project into a comedy of errors. Get ready for a rollercoaster ride of hilariously disastrous moments and questionable craftsmanship. Brace yourselves for the review you never knew you needed!Product Description and Expectations:The Ekena Millwork CMP16TR Traditional Ceiling Medallion claims to be a stunning addition to any room, promising to add a touch of elegance and sophistication. The description had me envisioning a seamless installation process, exceptional craftsmanship, and a final result that would leave me and my guests in awe. Little did I know that the reality would be quite the opposite.Unpacking the Medallion:As I eagerly unwrapped the package containing the CMP16TR Ceiling Medallion, my excitement quickly turned into confusion. The unfinished surface appeared rough and poorly sanded, resembling a piece of wood that had been gnawed on by a family of beavers. I couldn't help but wonder if I had received a defective unit or if this was the quality Ekena Millwork proudly stood by.Installation Woes:With a determined spirit and a bucket full of optimism, I embarked on the installation process. Little did I know that I was about to face a series of trials and tribulations that would test my patience to the extreme. The pre-drilled holes on the medallion were misaligned, resembling a constellation in the night sky rather than a logical pattern for mounting.As I attempted to align the medallion with the electrical box on my ceiling, it became evident that the dimensions provided were misleading. The 16" outer diameter was not accurate, leaving an unsightly gap between the medallion and the ceiling. It was as if Ekena Millwork believed that gaps were the latest trend in home decor.Craftsmanship Quirks:Now, let's talk about the craftsmanship—or should I say, lack thereof. The intricate design, which was supposed to be the medallion's centerpiece, was riddled with imperfections. It looked as if a blindfolded monkey had attempted to etch a pattern into the surface. It was truly a masterpiece of chaos, with uneven lines and random dents that added an unintentional "modern abstract" touch.To make matters worse, the edges of the medallion were jagged and unfinished. It felt as though they had been chewed on by a pack of feral cats. I couldn't help but wonder if Ekena Millwork had outsourced the production to a team of deranged beavers and cats.Painting Nightmares:In a desperate attempt to salvage the medallion, I decided to paint it. Little did I know that my decision would lead to further misfortune. The surface of the medallion, despite being advertised as "paint-ready," proved to be a nightmare to work with. The wood absorbed the paint unevenly, creating an amateurish result that screamed, "This person should never be allowed near a paintbrush."Mounting Madness:As if the misalignment and poor craftsmanship weren't enough, the mounting process turned into a comedy routine worthy of a prime-time sitcom. The screws provided by Ekena Millwork were about as effective as wet noodles, stripping and breaking at the slightest hint of pressure. It was as if they were made of melted plastic, rather than the sturdy metal one would expect.After several failed attempts at mounting the medallion, I resorted to my trusty collection of expletives. My neighbors probably thought I had enrolled in a sailor's academy. The only silver lining in this farce was the entertainment it provided for those who happened to witness my mounting madness.Conclusion:In all my years of home improvement projects, I have never encountered a product as hilariously disastrous as the Ekena Millwork CMP16TR Traditional Ceiling Medallion. From the rough surface to the misaligned holes, shoddy craftsmanship to uneven painting results, and a mounting process that bordered on absurdity, this medallion failed to live up to even the lowest of expectations.If you're looking for a good laugh and a cautionary tale to share with friends, by all means, go ahead and purchase the CMP16TR. But if you're seeking a high-quality ceiling medallion that will enhance the beauty of your home, I implore you to steer clear of this calamity of a product.

I wanted to change my entry way pot lots to hanging lights so we used a pot light converter kit. The kits come with small medallions that didn’t look right with our new lights and the new light base was just slightly too small to cover the pot light hole. We went with these medallions and it’s exactly the look we were wanting. No they don’t sit flush but they look fine with our 10 foot ceiling. We had to cut a little bit of the medallion to fit with the metal cover for the pot light kit but that was easy to do with some scissors and using the metal pot light cover as a template.