K&F CONCEPT 3-Way Geared Tripod Head, Millimeter Micro-Adjustment, Full CNC Aluminum Alloy Tripod Head, Maximum Load Capacity of 13.2lbs/6kg for Star Shooting, Commercial Photography, etc.

If you're doing product, architectural, or any other photography where you need precise movements, you need a geared head. I've been using one of the low-tier industry standards for a while now, but needed another one, so I decided to try this one out. Build Quality. Overall build quality is nice. It's pretty much all aluminum, even the knobs. Which could be both good and bad. Good, b/c there's no rubber to deteriorate over time. Bad if you end up denting/scratching it and develop sharp burrs. Not a big deal in the grand scheme of things. Fit and finish is nice and clean. Movements. Movement is firm. You need a strong grip to turn the knobs, but is very similar to my old one. One thing I don't like is there is a little bit of looseness if you switch directions, then after that it gets to the consistent full firm twist. The macro adjust knobs (orange) allow you to make large movements quickly. Works fine, but also requires a firm twist. Also, the sharp points tend to dig into your fingers while holding it open. Those could be sloped a little softer, like my older one. A 4-star twist knob would also be great like my old one, as you're not hunting for the grip point to twist it. This K&F Concept one only has 2-star twist knobs (the orange knobs). Weight. These aren't as lightweight as ballheads. But for geared heads, this is LIGHT at 1.95 lbs (31oz / 886g) with a claimed 13-lb load capacity. For comparison, my old geared head comes in at 2.76 lbs, w/ a claimed load capacity of 11 lbs. So big value there. I tested it w/ a large format 4x5 camera that comes near the 13-lb limit. The K&F geared head holds it pretty well. Only thing is the plate might twist if you force it hard enough for such a large camera. The tool-free thumb screw isn't enough to really lock it in. But there's a slot in the thumbscrew so you can really synch in down w/ a coin. Base Plate. Speaking of the base plate, there's two mini screws on the bottom side to help prevent your camera from sliding off when you loosen the plate to remove. Another bonus is that it has a slot on either side to secure one end of your camera or hand strap. Arca Swiss compatible so you can keep switching it to different mounting points w/o changing out the base plate. Only other thing I could see improved is the base of the geared head, or attachment point onto your tripod. It's a smooth base. See it side by side w/ my old geared head, which has indents so your tripod can lock in anti-twisting security screws. I can't speak for the longevity of it yet. I noticed other reviewers comment on it breaking after some time. Time will tell. All in all, the K&F Concept geared head is a great value for what you get. It contends just as well with others at this tier, at a lower cost.

This is one of the nicest non-fluid tripod heads I've used before. It's completely metal and built really solidly, and its really strong and holds the weight of my S5 with a 300mm lens with no problems. Paired with a nice pair of tripod legs this is super stable. The geared angle adjustments are really nice and give super fine degree precision, and there's a bubble level built in. The arca swiss plate mount is well built and super convenient. There are knobs that release the gears so you can quickly adjust the angle manually, but these are super tight on mine and I can't quite turn them far enough to release 2 of the 3 axises. But, the up and down one releases easily and that's probably the only one I would use. This is great for architecture and astrophotography!

I have been a long time fan of the K&F line of photo accessories. My primary tripod, a clamp-on ball head mount and a number of filters are part of my regular kit. I have been doing some maker projects recently. Building electronics for my ham radio activity, and a number of Lego builds (think Notre Dame cathedral). I like to keep of photographic record of my work. I also enjoy photographing the night sky. I need a solid camera platform for that. Using a standard ball-head mount on the tripod to do this makes it difficult to ensure a standard point of view and a solid platform from session to session. Well enter the K&F Concept 3-way geared tripod head. If you’re photographing buildings, maker projects; doing architectural photography or photographing outdoor scenes you should take a look at this geared head. The geared head is all metal, and beautifully designed. Built like a tank! Each control point provides a rapid release so you can make quick gross changes to your settings. Once you get close there are indexed knobs for fine adjustment. The knobs move smoothly and once you position them, they are not going to sag or move on you. I often find that with a ball-head mount, you get it set where you want it, tighten the clamp and let go of the head and it moves!! Maybe not much, but it does move. That will not happen here. Once and done. There are two bubble levels for you to do your initial tripod setup. The head Includes removable 1/4" Arca-Swiss quick-release plate for your camera and can hold a total weight of 13.2 lbs/6kg. The unit itself weighs in at a little over 1.8 lbs/800g. This unit is designed for use on a professional tripod and is outfitted with a 3/8 inch screw hole for mounting. The head comes with an instruction manual. You can find a number of videos online that will help you get familiar with the geared head if you have not used it before. This K&F 3-way geared tripod head is an outstanding piece of kit and I expect it to get a lot of work. If you already know that you need more control than the standard ball-head mount provides, or you want to expand your photo horizons the K&F 3-geared head mount is just what you need.

Great for real estate hdr photography. Allows you to align walls easily. Great feel and quality build. Easily installs onto tripod.

Handig in gebruik, stabiel uitermate geschikt voor macro-, stilleven-, landschap- en panoramafotografie

The horizontal axis would stop turning. My guess the internal gears are plastic and were faulty

Perfecta o casi. Se trabaja de maravilla con ella. Es robusta, pero ligera a la vez. No tiene nada de holgura (no como Manfrotto) y muy precisa a la hora de ajustar. Le pongo una pega, Los desbloqueos rápidos son un poco duros y poco ergonómicos. Por lo demás muy recomendada.

Great for Astro and for Panoramic photography. Well built, robust unit that is not to heavy. Very easy to adjust I have used it with both my DLSR and with my Dwarf 3 scope. It is so easy to make fine adjustments and it fits neatly onto either of my K&F tripods. A great buy, well worth it.