Antec Performance 1 FT, Full Tower, RTX40 Fully Compatible, Temp Display, 4 x Storm T3 PWM Fans, Type-C, Dual TG Side Panels, Removable Top Bracket, High Airflow Mesh Front Panel, E-ATX PC Gaming Case

This is the first pc case I've ever bought and had to transfer into. I'm kind of new to pc gaming. Only been at it for the past couple years, and never did anything like this before. Thankfully, this case made it super easy. The size, options and components make transferring into this case super easy. The cable management looks incredibly clean by the time you're finished. The holes for the cables have these nice rubber padded openenings, and the openings are all over the place to maximize which cables come out where. All the panels (the top, sides, cable channel covers marked 1 and 2) are simple to remove. They utilized these metal notches that slot in, so you only need one thumb screw to secure them, which is pretty neat. Even without the thumb screws, there are these ball joint things the panels snap into, so the thumb screws are just an added redundancy. I had 2 3.5" HDDs. In my original review, I said there was only space for one but it turns out I'm bad at reading directions. There is space for 2. There's room for 3 separate 2.5" drives on the cable management side, so plenty of options for expanded storage. The ventilation is all over the place on this thing, so it shouldn't have any problems staying cool, and keeping air going. Speaking of air, the fans it comes with are big 140s in the front, and from what I can tell, they pull a lot in through that magnetic front vent panel. I had a situation with my motherboard in my old case, and my wishes were granted with my top mounted AIO here. The old case had a problem with space for said AIO at the top because I have the extra thick Arctic 360 radiator + fans, which had to be installed kinda of slanted to get out of the way of the CPUs power cable (the connector for which was at the very top of the motherboard). With this new case, there's enough space for everything to fit as it's supposed to. I haven't done any customizing of fan curves or anything, but I played some Cyberpunk 2077 at 4k with Path Tracing and all bells and whistles on, although not for very long yet, and my cpu and gpu stayed cool as a cucumber. My 3080 used to get up to the 80s. The 4090 doesn't go over 70. I don't know if it's the case, or the cooling system on the GPU, or both, but regardless, it's running nice and cool. I saw a video on YouTube about this particular case being a little more noisy than the more pricey ones like the Meshify 2, but if what it produced was more noise, I couldn't hear it. It's much quieter than my last case, that for certain. I'm not sure what else to add that is worth while. If you get a 4090 for this case, you may have to slip the top pci slot cover in over the back of the 4090, because the plate on the top of the card sticks out a hair on the back side. You sort of have to wedge it in (angled 45, tuck in the bottom edge over that plate, then put it upright, then push it in toward the motherboard, then you can screw it in, or even just leave the screw, because it can be a hassle, and it being slightly wedged in will keep it in place). One of the neat things about it is the screens are very easy to remove. The bottom one can be slid out from the front, like a lint trap on a dryer. The front most panel just.. Pops off with a light tug because it's magnetic. I'll be up front here, as I said, I am fairly new to pc gaming, cases, etc., but I am thorough, and from what I have found and seen for myself, it's a great case, while also being very affordable. The biggest selling point other than the ease of use, is definitely the cable management. It is CLEAN when you do it right. It looks awesome if you don't care for the RPG puke, and enjoy a nice dark and sleek appearance. Also, for being a "full" tower, it really doesn't look much bigger than the mid tower I had previously. Maybe if you jump from a small tower to this one it'll be more noticeable to you, but it fit great in the same spot. All in all, I definitely can recommend this case. Especially for those on a more beginner/intermediate level who want a lot of open space to work with.

The Antec Performance 1 FT is a mid-tower computer case that offers a balanced combination of features and performance. In this unbiased review, we'll delve into its various aspects to provide you with a comprehensive overview. **Design and Build Quality (4/5):** The Performance 1 FT features a minimalistic design with a brushed aluminum front panel that gives it a premium appearance. The case is well-constructed and feels sturdy, which is a positive aspect in terms of build quality. However, some users may prefer a more flashy design, and the overall aesthetic may not appeal to everyone. **Airflow and Cooling (4.5/5):** This case is equipped with multiple cooling options, including support for up to six 120mm or four 140mm fans. It also offers compatibility with liquid cooling solutions, making it a good choice for those who want to keep their system cool, even during heavy workloads. The airflow design is efficient, and cable management options are decent, allowing for clean airflow paths. **Compatibility (4/5):** The Performance 1 FT supports ATX, micro-ATX, and mini-ITX motherboards, offering versatility in terms of motherboard compatibility. It can accommodate graphics cards up to 370mm in length and CPU coolers up to 165mm in height, which should cover the majority of user requirements. However, some larger graphics cards or CPU coolers may not fit. **Storage Options (4/5):** This case provides a good number of storage options with support for up to four 2.5" SSDs and two 3.5" HDDs. This should be sufficient for most users, but it's worth noting that the drive bays aren't tool-free, which might be a minor inconvenience for some. **Ease of Installation (4/5):** The Performance 1 FT offers a relatively straightforward installation process with well-labeled cable routing channels and plenty of cable management options. However, it lacks some premium features like a removable motherboard tray, which could make the installation process even more user-friendly. **Price and Value (4/5):** The price point of the Antec Performance 1 FT is reasonable, given its build quality, cooling options, and compatibility. While it may not be the cheapest case on the market, it strikes a good balance between quality and affordability. **Conclusion:** The Antec Performance 1 FT is a well-constructed mid-tower case with a minimalist design that might not appeal to users looking for more flashy aesthetics. It excels in terms of airflow and cooling options, making it a suitable choice for users who prioritize thermal performance. The case offers good compatibility for most standard components, but it may not accommodate larger components. The price is reasonable, considering the features and build quality it offers. Ultimately, the Antec Performance 1 FT is a solid choice for users looking for a reliable, mid-range computer case, provided that the design and size constraints align with their preferences and requirements.

Chose this for my first build. I found it easy to work with and the cable management is nice. The side panel is easy to remove for cleaning internals, and the included fans work great. The size inside is plenty, honestly I think I could have gone with something smaller but this future proof's for larger cards. One thing to note is the LED panel will not work if you don't install the Antec software, which can be a deal breaker on Linux as it's Windows only. There are some community workarounds on GitHub and I was able to code a workaround in an evening.

Intel i9 14900k NZXT Kraken 360 RGB - 360mm AIO CPU Liquid Cooler ASUS ROG Strix Z790-E Gaming WiFi 6E Thermaltake Toughpower GF3 1000W Intel Arc A770 Titan OC Edition, 16GB GDDR6 CORSAIR VENGEANCE DDR5 RAM 128 GB (4x32GB) 6400MHz 2 TB Corsair MP700 PRO with Air Cooler M.2 PCIe Gen5 x4 NVMe 2.0 SSD 2 TB SAMSUNG 990 PRO Series PCIe Gen4. X4 NVMe 2.0c Antec Performance 1 FT, Full Tower, RTX40 Fully Compatible The Antec Performance 1 FT is highly recommended for its spacious design, tempered glass sides, and effective cable management. It features a minimalist brushed aluminum front panel that adds a premium aesthetic, though it might not suit those who prefer flashier styles. The sturdy case supports up to six 120mm and four 140mm fans and liquid cooling systems for efficient airflow. It accommodates ATX, micro-ATX, and mini-ITX motherboards and most large graphics cards and CPU coolers. Storage options include slots for up to four 2.5" SSDs and two 3.5" HDDs. Installation is facilitated by well-labeled cable routing and ample management options, though it lacks a removable motherboard tray. The packaging includes a sectioned holder for screws and other thoughtful accessories like rubber shock absorbers for SSDs and both straight and 90-degree SATA cables. Despite its generous features, the front panel's magnetic "grill" might feel a bit loose, and it does not include RGB fans, though the included fans are quiet and high-quality. The case supports a 360 radiator comfortably, but a 420 radiator fits tightly and is not recommended.

this case is great. I bout if for my new build and im so glad i did. first, it just looks good. second, the design of the case compartments makes it so easy to hide all the cables behind the cover plates. it allows for a very clean and tidy build. This is a large case big enough for my RTX 4070ti video card, and still have a little room. The fans that are already installed are not RGB which was great for me since the light coming off the pre installed fans, the motherboard, memory cards, liquid cooling fans and the video card support would have been too much light. This case has plenty of airflow if your not using a water cooling system, it should be just fine. The smoke tempered glass looks so good. I made the right choice buying this case. The price is great also. this thing is sturdy and build well. The filters are easy to get to, easy to clean and make it easy to keep the components inside the case as close to dust free as you can get. If your looking for a case for a new build or upgrade, this is the one.

This is a great case in many ways. Lots of features for air flow and filtering, nice power cord routing, plenty of room in most places. But, it is a little too narrow for the latest massive GPU's. Putting a Gigabyte GeForce RTX 4090 in it, it smashes the power cord against the glass sides. I don't feel good about the strain that's causing on the card power connector. If Antec was going to make a case this big (it's a huge case, which is fine since it makes it easy to put all the parts in), why not make it 1/2" wider and eliminate this issue? Of course, I could ask similar questions of Gigabyte, the video card manufacturer: Why put the power cable sticking straight out of the edge of a card (directly away from the motherboard) when that card is already so wide? Their placement of the power cable connector effectively made an already wide card at least 1/2" wider. This seems like a really bad design decision. They could have used a right-angle connector, or moved the power input to somewhere else completely. So, call it Gigabyte's fault, or call it Antec's fault, or both (or call it mine for not taking careful measurements before buying the case, but it was SO BIG I never thought there would be an issue), but the size of the case you need to build a really nice computer seems to be getting out of hand, to the point where I bought what I thought was an absurdly oversized case for my needs, and my video card just barely fit (and still not comfortably!). Still, the case looks great, and functions well. I'm just not thrilled that I got a very full-sized case and still have to almost force the video card power cable against the glass to close the case. One final thing: That cool display they show the case having on the upper front, where it tells you the CPU temp? It doesn't work at all on mine. I have no display. Maybe that's a driver issue I can fix, but so far, nothing. I can get that info from within the OS, so not a huge deal, but it would be nice to have the display work.

I've have this product for almost a year now and it's held up great. The case is very roomy with great airflow. It has plenty of room to fit a full size mb, full height cpu cooler, and a full length GPU. There is a separate back compartment for cable management and drive mounting, and a bottom compartment for the PSU. I have had absolutely no issues with thermals utilizing just the case fans it ships with with. It's very easy to build in and maintenance is a breeze. There are mesh filters to minimize dust intrusion and the side panel comes off easily for deep cleaning. The fans the case shipped with work great, are quiet, and have had not issues so far. Case ships with an absolute excess of hardware in a little plastic tool tray which is always great to have when you're building a system as some component companies skimp on screws and such. As someone who has built PCs in SFF and Budget cases for friends and family I cannot stress how nice it is to have a quality and big case to build in. All in all very happy with my purchase, my only caution would be to make sure you understand how big the case is before you buy it. It is not something you would likely want to put on your desk. SYSTEM SPECS: MSI Pro X670-P 7900X w/ Dark Rock Pro 4 XFX 6950XT Corsair Vengeance 2x16 DDR5 Corsair HX850

The first pc case I ever bought when I was broke college student was an Antec because they were cheap. This case is also relatively cheap (bought for $115 on Black Friday), but man Antec has made some serious strides over the years to create this case. I have built in dozens of cases, big and small, cheap and expensive , but this is my favorite case so far.. even more than the Lian-Li O11-Dynamic. It feels like it was made by someone who actually builds computers instead of some engineer who just designs stuff for a living. The fact I don't have to dislocate a finger to pull out the 8-pin CPU connectors says a lot. The Good: All panels are able to be easily removed to access whatever you need, whenever. The power supply plate attaches directly to the back of the power supply allowing you pull it out directly without having to crack open the case. The location for the GPU connector grommet is *chef's kiss*. No pulling it from the bottom or top of the case and showing a big amount of cable. It aligns perfectly with the GPU 16x connector allowing you keep most of the cable hidden.. The cable management system on the back side of the case is plentiful and really well though out. It comes not only with 3 large tie-down straps, but a plate to cover it all up and a 2nd tempered glass panel on the back to show off some of your goodies. So keep it neat ladies and gents ;) I had a set of 3 deep cool fans I pull from Phantex Phantom case (the case I replaced with this one), but honestly the 4 provided fans (3 intake and 1 exhaust) look so good and run so quiet that I left them in. Really well done. Not bad, but areas to improve: There are two areas of improvement for Antec. One, the temperature panel is a bit small, boring, and not all that useful, though it does look ok and has a nice font. It also requires the Antec IUnity app, on and running, for it to work. Which is fine because IUnity looks great and shows a lot of info on a compact screen, but this is where issue two is. The IUnity app cannot be minimized to the tray and the app itself cannot be resized. Fix those two things and you've got yourself a good app Antec! Amazing case, 10 out of 10, would buy again.

Un boîtier très bien conçu avec une excellente qualité de refroidissement et un montage très facile de tous les composants internes. Belle qualité quasi tout acier et très peu de vis. Design sobre et sans chichi. La possibilité de démonter complètement la face supérieure avec 2 petites vis est géniale pour installer un radiateur AIO et accéder aux connecteurs 12v de la MB. Filtres partout accessible via des plaques magnétiques. Plaque de cache des fils arrières. Existe en blanc et en RGB. Juste top. Plaque de montage immédiat de l’alimentation super idée. Parties vitrées sécurisées à l’ouverture. Filtres à poussières partout. Caches métalliques des fils en partie arrière. Possibilité de monter un radiateur et partie basse pour refroidissement graphique à haut et d’un AIO de 420mm en face avant en lieu et place des ventilateurs livrés. Les ventilateurs integrês sont livrés montés à l’avant et à l’arrière. Un adaptateur bien repéré est fourni pour le montage rapide des liaisons unitaires du panneau de commande tels que power on, reset etc…. Affichage LED intégré au boîtier de la température CPU et GPU via une application windows qui pourrait cependant être améliorée pour sa stabilité. Discord de support ANTEC réactif. Prix très concurrentiel pour la qualité.

m-ATXからの載せ替えで購入 前後、上下に通気口があるので、エアフローは抜群です 背面部も、スッキリ束ねられるマジックテープが付いているので、かなり纏まりがいいです 大きいですが、その分作業がしやすく、あり余るくらいビスなどが付属されています(笑 元々ついているファンは少し弱いので、エアフローに拘る方なら交換する方がいいと思います あと、温度表示させるには、ドライバーを入れる必要がありますのでご注意を あと、両面ガラスなので、当たり前ですが重いです(笑 前と上下に引き出し式のエアフィルターもついているので、手入れも楽で、私的には大満足です

Kesinlikle çok kaliteli. Tavsiye ederim.

Once of nicest PC cases I have ever owned. It fits everything that I want to fit in it, is built like a tank and looks awesome.

Los materiales se notan resistentes, se puede remover la parte superior sin problemas para acomodar lo que necesites. Temperaturas realmente no parecen ser un problema, junto a un buen sistema de enfriamiento han mantenido la PC a una buena temperatura Ojo, por las medidas, es grande, pero no ridículamente grande, puede acomodar un enfriador líquido de 360 en la parte superior, pero si tienes uno de 420, forzosamente tienes que retirar los ventiladores de 140mm para acomodarlo al frente. Hablando de ventiladores, son de una mejor calidad de lo que esperaba, pero toma en cuenta que la placa frontal sólo soporta ventiladores de 140mm, las placas inferiores so usan exclusivamente ventiladores de 120mm, y la placa superior es la única que puede aceptar variaciones. En general muy buen material, tiene una gran cantidad de tornillos que puedes remover a mano, y tiene dos placas que ocultan completamente el cableado para hacerlo ver significantemente más limpio. Algo que se podría considerar un bonus, o un punto malo, es la existencia de dos masivas "puertas" de vidrio templado, se ve hermoso, pero no las dejes tocar algo como cerámica, o explotarán fácilmente.