Shelly Plus Add-On | Add-On for Shelly Plus & Gen3 Devices | Temperature and Humidity Sensor Interface | Home Automation | DS18B20, DHT22 & Arduino Sensors | Analog and Digital Input | No Hub Required

I added this to a Shelly 1 Plus and fitted it with 5 long DS18B20 temperature sensors to be able to check that cold water pipes were not getting cold enough to freeze. The Shelly app shows the data as nice graphs, but I also have them connected to Home Assistant using MQTT, which works really well. It was very easy to install the device by clipping it to the Shelly 1 Plus and wiring in the sensor leads (although the screw terminals are really tiny).

Works well. Added the unit to a Shelly 1PM to get powered, first time using Shelly products had a slight problem getting the device to sync up with app, figured out it was a VPN problem and now it works. Added a 2 temp sensors on my hot water tank and works perfectly. Wished I knew about these devices earlier.

Fantastic add on to a Shelly one. Used it for monitoring the temperature on my boilers flow and return pipes. With an additional device in the pump cupboard I can see the heat loss on the pipes from the boiler to the pump and back to the boiler. I’ve not got a condensing boiler so the return temperature is not critical, but when I have to replace my old boiler I should be able to predict what flow temperature I can run and I can see the impact of inculcation on my pipe work.

Coming to really enjoy using Shelly products, I have one of these add ones but several 2P and an army of 1Ps around the house and they are just rock solid. This add on upgrade was a case of just switching off the parent device, attaching this and the temperature sensors to it and switching back on before adding the sensors in the app. Easy peasy, took all of 10 minutes to read the instructions and implement. Immediately shows up in Home Assistant and readings coming in. Exactly as IOT devices should be, easy and reliable.

I've been using Shelly devices for several years and have been consistently impressed. These add-ons are fantastic! I have one currently controlling my 240V, 3000W electric space heater. It's configured with one leg of the 240V connection (at 120V) running through the relay, which also powers the Shelly 1. This add-on is connected to a standard DS18B20 temperature probe. Using Shelly's virtual thermostat feature with this add-on, I can precisely control my shop's temperature from anywhere with an internet connection via the Shelly app. I also have another one of these units controlling an exhaust fan in a grow room, connected to a DHT20 temperature and humidity sensor. Both add-ons have been working flawlessly. You can use these devices with a variety of sensors, including soil temperature/moisture sensors, and they can be powered by DC as well. This adds tremendous value to Shelly Plus devices! I highly recommend these add-ons for any home automation project. They are easy to configure and use. In the future, I plan to add a display unit and an OpenHab server to create custom widgets showing the temperature and other metrics all in a nice wall display.

Al momento funziona benissimo, dopo svariati mesi. Ottimo articolo ,semplice istallazione e se sei pratico ci puoi fare di tutto

Perfecto para el proyecto

Parfait pour en complément d'un Shelly plus 1pm

Works exactly as advertised