ORXPLUS TOOLS 2 in 1 Inner-Outer Reamer, Pipe and Tubing Chamfer Tool for OD 1-1/8" to 3-1/4" ID 1-1/16"to 3-3/8"

Works really well on ABS. Forget using a file or grinder. SOOOOOOO much faster. Great simple product. I want 2 so I don't have to switch it on the drill. :-)

I used this for PVC pool piping. It worked great! On larger diameter pipe my chop saw often leaves ragged edges. This cleans both inside and outside in seconds to leave a high quality fitting. I've found it's durable. Makes a piping job go MUCH faster.

Not as advertised, dull, only functional in one direction, and even that wasn't good enough. Doesnt fit 1/4 inch bit drill

The media could not be loaded.  Usually I bevel with a utility knife. The time wasted doing that is stupid. Saw this tool, figured I would give it a shot.The tool is a good quality build, nice and beefy. The flat bars look like they might live a while.It works fine with larger sizes of pipe. You just need a steady hand, but you can carve the edges of 4” and larger pipes with a good result. It’s not ‘perfect’ but it will stay in my tool bag. Not sure about the life yet - I can see this eventually becoming dull and chipping the pipe.

This dual sided chamfering or deburring tool by ORXPLUS will quickly and easily chamfer your larger sized plastic pipes up to 3-3/8" (internal chamfer). The tool fits easily into a drill and is designed to only cut in a clockwise direction just like a regular drill bit. The tool utilizes cutting blades that fit into the grooves of the cone shaped cutting tool and are locked in place by a retaining nut at the top that also allows for locking of the mandrel and 3/8" drive shaft. The 3/8" drive shaft does mean that you'll need a drill chuck to mount as it's bigger than a typical hex drive which is 1/4". The instructions also do not recommend using this with an impact driver.I found the key to getting this to cut well is using the right speed. Unless you're able to clamp the pipe down, using too fast a speed will cause some chattering and leave you with a not so smooth finish. I got good results using lower speeds and controlled pressure while turning. It will also be sensitive to any deformation in the pipe and may not cut evenly if the pipe end is not cut square or perfectly round. It can take some practice to get ideal results. Although this is designed for plastic, I had some success with aluminum too. You just have to go slow but you may dull the blades more quickly with aluminum tubing. I did notice that when the end nut is removed, the way the mandrel fits into the cone casting does leave a weak spot around the top. The first one I used actually cracked at this point with just a few uses without any obvious cause. Luckily, I caught this in time to process a return and the new one has not shown signs of damage although I will monitor this connection point in future to see if it fails again. Overall, I'm very happy with the performance of this tool for chamfering but I feel like the design of the casting mount could have been better. For the current price of $64.99, this is a pricier but specialized tool so I'll give it 4 stars.

Great tool. Makes quick work of beveling and chamfering pvc pipe.