Spigen Rugged Armor, Designed for iPhone 7/8 Case, Original Design Patent Flexible Case for iPhone 7/8 - Midnight Blue

Fits perfectly. The rubber slides over the edge of the phone without causing any scratches, and holds tightly. Getting the case on and off is easy but you never worry that it's going to fall out or become loose. The screen is protected by a lip on the front edge so you can put your phone face down without worrying about scratching the screen. The buttons on the side (volume, power) are covered with nice moulded buttons (with very crisp PWR and +/- mouldings) and the silent/ring switch is open so it can operated as normal. The gap for the lightning port has enough space for third-party cables which can be a little larger than normal. The camera and flash are not blocked in any way (so this is a case designed for the 7, not just a 6/6S case) The carbon-fibre effect panels on the rear look great and are high quality. The quality of the mouldings and materials are great, would recommend to anyone. Edit : Several months in and the case still looks god as new. Doesn't pick up pocket lint. Has not worn in any way. Would definitely recommend this case & this brand.

This is probably the best case case I've ever had for one of my phones. I'm writing this review without reading the others, so if it conflicts with what someone else says, then that's their opinion but mine is genuine and unbiased. Case owned for a little over 2 months now I think. 1. Looks - It looks real smart, its mostly a matt black rubber, apart from the obvious carbon fibre look panels. It doesn't make the phone look chunky at all. Which i was worried about because part of the reason I like the iPhone 7 is because its sexy slim. The edges are raised slightly higher than the screen, meaning if you place it screen down, it shouldn't scratch. Same for the back with the camera lens. 2. Protection - Does it work? Well I haven't dropped it out of a window. But it'll take a fall onto concrete from my hands or off a windowsill. It seems to be slightly reinforced in the corners but you can only tell from the inside, so it doesn't change the appearance. 3. Negatives - I had to really think about this. All I came up with was its hard to flick the silent switch with one hand when the phone is in your pocket, and after a while the case leaves a little pattern on the back of your phone but it you rub it enough with just your finger it comes off. So yep. I'd totally recommend this product to anyone.

Have always used spigen covers for my phones. Excellent quality products that seem to last a life time. Offers great protection for the phone and is extremely durable. Have dropped my phone many times and the case has saved me each time. Feels comfortable in hand with plenty of grip. Very stylish and sleek looks great and isn’t too bulky. I’ve had issues in the past with bulky cases but since I’ve switched over to Spigen I haven’t had that issue. Fits my iPhone 7 perfectly and the colour looks classy. Don’t waste your time trying other cases just go straight for this and you won’t be disappointed. Fully recommend this product

I bought this item prior to reading the many negative reviews and thought I'd be sending this back, however I took the protector from the packet to see for myself. I found that IF you take the time to line this up perfectly, this works great. There is literally no margin for error when it comes to the width. If you are slightly too far one way, you'll be exposing pixels. As for the height, it covers as much as you need. This will not cover the entire face of the phone, I believe it's designed to have a gap to allow for the curve in the glass and to be able to fit a phone case over the top. I have a Spigen phone case and these work together great. Only four stars because I believe the width of the glass should and could be a good 1mm wider and another 2mm on the height. This would look slightly better, make it more forgiving when being fitted and still be well within the boundaries of most phone cases. Touch ID still works 100% as it did before. A decent quality product.

Best phone case I've ever had really strong and durable I've dropped my phone loads with this on and no damage

Having purchased a Spigen bumper case for my wife 3 months ago after she smashed her iPhone 6 (the 3rd time this year), I decided to go ahead with one for my new iPhone 7 since I've seen it first hand how her Spigen bumper case saved her phone (and my bank account) on 4 occasions. The bumper itself is now actually not flush with the case however after the brutality it's been through , I'm surprised it's still in one piece. Anyway, back to my Spigen case review. Upon receiving this item, everything was as expected. Great rugged quality and the two carbon fibre strips at the top and bottom are a great touch. Grip wise, well it's a lot better than some of the smooth effect cases out there, however it would've been nice to have touch more of a 'solid' grip as this one can be a tad slippy (this is me being picky now....I would rate it an 8/10) . Aesthetically it is very pleasing to the eye and doesn't take away from the 7's attractability. The best thing I like about this case is that it's going to protect my screen in the event of a drop face down due to the overlap on the front (see picture) . The one thing I couldn't stand on a lot of the more expensive cases was that horrible plasticky clear film on the front which completely lost the feel of the iPhone's awesome screen. The only 'negative' which I can say is that from having a similar UAG case for my iPhone 6 Plus, be sure to take your iPhone out of the case each week and give the inside of the case a good clean as debris can sneak in and possibly scratch the side of your iPhone. Now I haven't had this case for even a day yet so it is possible that the fit is a lot more snug than my UAG but I will see if I can add that information on the 'debris' aspect to this review at a further date. All in all a great everyday protective case that feels and looks great ! For the price and for the quality you're getting, I wouldn't bother anywhere else.

Spigen cases are genuinely some of the best cases you can buy for your phone, they look good and provide protection at the same time. The rubber material helps improve the grip of the iPhone and the slightly raised bumper at the front adds some protection to the screen. The case itself is extremely thin and adds very little size and weight to your phone. I have used spigen cases for: Iphone 6 Samsung Galaxy S6 Samsung Galaxy S7 Samsung Galaxy S7 edge Iphone 7. This is the case I bought however I returned it as I replaced the phone with a 7 Plus (I have purchased a spigen case for the 7+) Throughout my time of owning these phones I have applied the case immediately. This has allowed me to sell each phone as a 'virtually new condition'

Usual Spigen good quality, well built case. Been using it now 6 Months solid on an iPhone 8 & it's still looking good. I've dropped the iPhone a good few times inside & outside too & not a mark so far. Be aware though that Spigen are a target for copy cases so make sure to buy from Amazon only, make sure box is sealed & check the Spigen hologram etc... Well made case that looks good + protects your phone without much bulk (wireless charging works fine through its back) so all in all well worth the price :)

Kargom 24 saat geçmeden elimdeydi güzel paketlenmiş olarak ulaştı , telefon ile harika uyumlu ve eldeki hissiyatı çok iyi . Kesinlikle tavsiye ederim

I have bought previous Spigen cases in the past, and I was severely disappointed. But I gave the brand another shot after reading the reviews. I am glad I did. I like cases that add a little grip (but not too much). Add only a little size, but a lot of protection. And of course look nice. This does add some rubbery grip. Great for when I have to chase my kids with phone in hand. Feels like it will not be able to slip out as easily as previous hard plastic cases. This thing is thin, which is perfect for fitting in my jeans pocket. I cannot stand bulky cases, and this is as far from bulky as you can get without just being a bumper. But at the same time, you can feel the strength in the material. I have not tried dropping it on a corner, but it seems like this case will help with protection. And it looks unobtrusive. I don't want people staring at my phone, and I don't think they will with this style of case Note that I did make a modification to the case. I have little metal plates that connect to my magnetic dash mount. so I used a sanding cylinder on my Dremel to sand a little indent, and then siliconed the metal plate in. This make sure that the plate doesn't cause extra bulkiness or move around like previous cases. There is plenty of case material to do this with. I didn't even come close to punching through (my one worry with this technique).

Fit my iPhone 7 perfectly. It has some grip to it (unlike a lot of smooth plastic cases) which makes it harder for it to slip out of your hand. Provides good protection without being too bulky. The design is also sleek. Would still recommend separately purchasing a glass film to protect the front of your screen as well though.

Super Hüll für iPhone 8. Passt super und schützt rundum. Steht über dem Display, somit guter Kanten und Glasschutz. Dicke gut, prima Handling aller Tasten und des Anschlusses.

Dropped by phone couple of times on all angles and didnt get a crack so the cover really protects your phone