Dust Filter PC 120mm for Computer Cooler/PSU/Routers Nylon 80 Mesh, Magnetic Frame PC Fan Dust Mesh Cooler Filter Dustproof Computer Fan Grills (Nylon, 120 * 120mm, 2pcs, Black)

There are perfect! I bought 2 of the nylon dust screens for my SFF console build intake fans. I have a corgi and the dust and hair is crazy in my house. They filter with ease and without hindering airflow much. I didn’t expect the magnets to hold the fans, but they do! Highly recommend!

Quality product. The magnet is strong enough to hold the filter securely without using the screws. It also comes with some little sticky pads if you for some reason can't make use of the magnet or screws. I bought the wrong size for my needs but that's my fault for not paying attention. Airflow in my case seems to be fine with them installed so there's no issue with them choking the intake fans.

Good reliable filter

I'm using these dust filters on fans inside my plant cabinet. In order to prevent dust it makes sense these would go on the back of the fan where air is coming in toward the blades, right? However, by doing this, it seems to slow the air flow significantly compared to the fan without the filter. I'm not sure that it matters for me but it is something to take into consideration.

Really inexpensive considering I recall having purchased filters nearly identical to these from a premium brand at a premium price. Airflow naturally gets restricted a little when you install these on a PC, but I dremeled out the fan hole's steel mesh on my PC case to unrestrict a little airflow, so...? I suppose it cancels out. You may find that one or two of the sides of these won't lay flat on your PC case. At least for me, this was my experience when placing it on the bottom fan (where my case is made of aluminum and not steel). It's not impossible to get it to lay flat, you just will have to loosen all four of your fan screws a little, then either play finger twister with your hand to hold it down while tightening the screws, OR use tape to aid installation. Experiment with tightening screws round robin, or perhaps tighten one corner then the opposite corner immediately after. There's a trick to it, and it's not too difficult to figure out. You'll see as you try. The key is just to get all screws 80% tightened so the filter has no tension dragging it anywhere when you start. As for the filter itself, it's premium nylon mesh. Doesn't get any better than this if that's what you're after.

I really like these dust filters. They have a good amount of mesh to keep out dust while allowing good air flow. The magnetic edges are a plus. I expect the inside of my case will remain a lot cleaner.

Good quality and it looks exactly as advertised

Perfect for what I wanted and that was a way to cool my mini pc without getting dirty. Since there’s not a lot of space and I’m admittedly maxing this thing out with 64g and 4 tb it got a little toasty so I popped the top mesh screen over it and have an exhaust fan keeping it nice and cool. Super great quality.

Ok jest dobrze! Jednak siatki powinny być żadsze bo te mogą szybko się zapychać kurzem. Samo założenie siatek to zmniejszenie przepływu powietrza o 10% a po dwóch tygodniach nawet 30% więc nie zapomnij ich czyścić.

Encaja perfectamente y no vibra, funciona muy bien.

Under my bed fans input these on. I have them in a line since the fans themselves arent that powerful but move a large volume on air. I noticed on the intake fan this thing trapped a lot of dust. Works well I just have to vaccum it everyonce in a while easy peasy. Also since my fans arent metal this doesn’t stick but the holes i. The design are perfect because it allowed me to actually just screw them in with the casing. The mesh is very fine and trapps alot of dust which is perfect for my needs since fans are on floor and i have pets the fans are essientially acting as vaccume cleaners. Lol. Overall the fans I got were not super expensive however these filters will elongate their life and make sure dust is not just flying around everywhere. Love em.

Dimensions conformes aux caractéristiques et qui marche très bien avec un ventilateur Noctua NF-A12x25 LS-PWM

Perfette