can you hook a ceiling fan?

Thank you for your questions. The Max. Rating of this product is 10A/ 1250W (Resistive), 8A/ 1000W Tungsten / 600W Fluorescent / 200W LED. And its HP is around 0.5HP. Please check the power rating of your ceiling fan. Please also know it is a switch and can only turn on/off the power. It can't change the speed or something. Best regards, surai-tech@outlook.com Suraielec Customer Service

Can I operate two separate lights with two separate Suraielec switches /remotes in the same room without them interfering with each other?

Thank you for your question. Nowadays more and more people start to use wireless products and most of the wireless products use the 433.92MHz frequency so these wireless products influenced and interfered with each other easily. And the wireless products not only be influenced by each other but also by some other electronic devices and barriers, especially by metal objects. So there are many factors that influence wireless switches' signals. Our wireless light switch kits use rolling/dynamic codes which means the code of the wireless light switch changes each time you re-program it. Some of the other wireless switches in the market use fixed codes. All the wireless switches use like among 6 to 8 codes which will cause lots of interference, but our wireless switches don't have this weakness. So it is OK if you want to use 2 or more sets in a room or if your neighbors also use our wireless switches. Please feel free to let us know if you have more questions. Best regards, support@suraielec.com Suraielec Customer Service

My existing wall switch just uses two hot wires and ground, not neutral. Can I use your switch as a replacement?

I'm sure that you connected your switch by now but for other readers your question indicates that you are replacing an existing switch. The two "hot" wires at the switch come from the light and the switch completes the circuit to turn the light on. After disconnecting the old switch separate and insulate the ends of the hot 2 wires. The remote switch runs on batteries and is not connected to 120V power. Install the receiver near the power source and light.

SURAIELEC

التفاصيل

الوصف

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة