1/16" Radius Roundover Router Bit 1/4" Shank, Edge Forming Roundover Bit Bead Rounding Over Edging Bit by BINSTAK

I haven't used the 1" but should be a good buy.I used the 3/4" bit that cut smooths and clean. From same order. I would buy product again.

You must take incremental cuts on this big bit . It cuts fine and true.

Works exactly as expected.

I ordered two of these a 1 inch radius and a one and a half inch radius received both of them defective or damaged

I was so excited to use this bit, but I have to force the router into the wood. It's regular birch plywood with some veneer on the top and this bit is burning the wood more than it is cutting. I couldn't even get it an inch in. I tried a few different router speeds but it didn't matter. I rarely leave bad reviews but I thought this one was important. Maybe I just got a dull one. I also got the 1" version and it cut better.

I have bought several bits by BINSTAK and I am always impressed with the quality of the bits. They are well made and stay very shape after continued use. This bit is a great vale for the money and I would recommend that if anyone is interested in this or other BINStak bits to order and use them. You will not be disappointed.I will also tell you that they are very responsive to customer inquiries and generally support their product. I am always happy when I purchase these bit and they get a lot of use and never fail me. Thank you again BINSTAK.

I just now used this bit...or rather tried to. Upon first runup at a low rpm as I usually do with a large diameter bit I noticed a significant vibration. Thinking it was instillation error I removed the bit and collar and throughly cleaned the entire rotating assembly including the threads on the router(Bosch).Reinstallation and subsequent runup produced the same results. The vibration is bad at lowest speed and even with the top bearing removed it's still present.My fault for not checking the bit when I I received it so now its absolutely useless as my return time has long gone.UPDATE: Distributor contacted me within an hour of my inquiry and offered a full refund. This is superb customer service and I have reordered another bit with 100% confidence!!

I didn't have high expectations, but was hoping next-day shipping would get me going for the one cut I needed this router bit for. Someone else noted that the bearing was very poor quality, but knowing that - and knowing that I had a set of high quality bearings already - I took a chance that I could make it work.Well, sure enough, the bearing was very sloppy and loose. When I took it off to put on a quality bearing, it fell apart in my hand (see pic).Well after putting a proper bearing on the bit and mounting it in my 3-1/2 HP router, and realizing this was a large bit so starting at a relatively slow speed, the bit immediately showed a lot of vibration, I tried different routers and different speeds as well as other bits and came to the realization that the bit is just junk all around and not balanced.Don't waste your money. I gave this two stars so that maybe people who throw out the top and bottom ratings will see this and beware.

It did what I needed it to for project but it's not super sharp.

El extremo superior de una de las cuchillas llegó rota y lo tuve que devolver.