Leolee 1/2-Inch Drive Digital Torque Wrench with Angle, 7.38-147.5 Ft-Lb/10-200 Nm Electronic Torque Wrench with Preset Value, Data Storage, Buzzer, LED Flash Notification for Motorcycle, Car

for the money it is worth it if you are planning to do engine builds. having the ability to do torque angle is a must on a honda. it also has preset so I can do different area of the block without resetting. feel nice and sturdy, as far as accuracy it is pretty good compared to my clicker and definitely better than trying to use a manual angle gauge.

Could have sworn I clicked on the half inch wrench but I guess not. This works great for what I needed. Instructions were a little hard to understand and I had to search you tube to figure it out. First set your torque complete that then come back and clear it and set angle. Sure beats that old needle gauge.

VERY GOOD TOOL... AT THE BEGINNING I DID NOT KNOW HOW IT WORKED, BUT YOU HAVE TO READ THE MANUAL FOR A WHILE SO YOU UNDERSTAND HOW IT WORKS. WHEN YOU ONLY NEED TO APPLY TORQUE THE ANGLES SHOULD BE AT "0" SO IT WILL NOTIFY WHEN IT REACHES THE INDICATED TORQUE, BUT IF THE SCREW HAS A TIGHTENING ANGLE, YOU HAVE TO ENTER THE ANGLE THAT THE SCREW HAS, THEN THE TORQUE OF IT... THEN WHEN YOU APPLY FORCE, THE TOOL WILL BEGIN TO REACH THE DESIRED TORQUE, ONCE IT IS REACHED IT WILL IMMEDIATELY JUMP TO THE ANGLES.. THAT IS FOR EXAMPLE: 20 N/M AND 10 DEGREES, FIRST IT REACHES 2O N/M AND IT AUTOMATICALLY FOLLOWS THE DEGREES DIRECTLY, IN ONE TIME AND IT WILL START SOUNDING WHEN IT REACHES THE INDICATED DEGREE. AFTER UNDERSTANDING HOW IT WORKS, I FALL IN LOVE WITH IT... A VERY GOOD BUY... BUT BE PATIENT, YOU HAVE TO READ AND UNDERSTAND A LITTLE, AS THE INSTRUCTIONS ARE A LITTLE TANGLED... UPDATE: the tool does what it should, after several tests and assembly of various parts that required torque with angle, I was able to verify that this tool is wonderful. Remember: example, if the screw says 35 Nm, and 45 degrees, you have to put the indicated torque first, then the angles, when the operation begins, it warns when the screw already has 35 Nm and the indicated angles, all in one simple operation, there is no need to stop for 35 Nm and then the angles, a single operation and that's it. if you only want torque, the angles should be at "0".

Works great the battery saver is a little annoying but for what it is at that price it'll do well

Just what I needed with a budget-friendly price! Thank you!

what ever you do do not buy this torque wrench. I purchased it to torque the heads on my truck which called for and angle torque sequence. The torque wrench calculated the back ratcheting as angle movement and it completely messed up my procedure. Further more it would randomly added angle to the measurement because the head of the wrench is so sloppy even if i had turned nothing, a slight jiggle would just add a bunch of angle. I then proceeded to test the torque wrench in a controlled environment to see if i was doing something incorrectly. I found that depending on how tight a bolt was or wasn't effected what the read out. Sometimes 90 degrees would be close to an actual 90 degrees and sometimes i wouldn't even get to 45 degrees and it would be flashing over 100 as if i had gone well past my mark. Because of my trouble with this wrench I looked in to many wrenches, and the only one i saw that hit the mark for other mechanics was the snap on. I have never bought snap on because they are way out of my budget but if precision torque is needed then the only way to find it is with snap on.

I easy to use and looks nice as well!

Muy bueno

Exelente calidad de los materiales y muy preciso

Surprisingly good quality for money. All metal construction with etched numbers. Goes slightly higher than typical 3/4". Would buy again.

.

This torque wrench is easy to set and has a positive click when it reaches the right torque when tightening a wheel stud hope it lasts will see I guess

La llave tiene muy buena calidad, funciona excelente.