Centre Fork Light Bracket 534-2440 Cycling Lights and Reflectors - Black

I bought this bracket at the same time as the Cateye AMPP 500 for my Brompton. I wanted better visibility when cycling through dark/poorly lit parks and I needed better visibility on the roads to accompany my smaller flashing light which is mounted higher on my handlebars. This bracket does fit the Brompton on the lower brake bracket but it needs a bit of fettling to make it work if you carry a front bag as the light hits the block affecting steering. It's fairly simple, just disassemble the plastic light clip from the metal bracket and turn it through 180deg and mount it the opposite way round to how it's supplied. This will allow you to feed the bracket under the brake callipers so the light is mounted lower and no longer hits the block or the bag. g. (You may need to fit the plastic light bracket after you've fitted the metal part to the bike to make it easier to feed under the brake calliper) If you don't use a front bag and carrier block then I imagine this won't be an issue, so just mount it above the calliper as normal. I hope this review helps anyone with a Brompton. 👍🏻

Functions exactly as expected. Enables me to ride with bar bag and still have unobstructed light for visibility.

Good quality. But a bit expensive

Good but basic. Does not include mounting bolts, so be aware that you'll need hardware to fit this. Fairly hard to tighten. The mount itself is plastic and fits Cateye lamps properly (Ampp 400).

I've been using this with the Cateye Volt 1700 permenantly mounted for three years until the metal bracket sheared off and dropped my light on the pavement without warning. I probably covered about 4000 miles in this time. The good: A really rock solid mount for the light that does not slip like handlebar mounts, if mounted correctly - which leads me to the extras... The extras: To secure a good mount, you'll need to buy some 1" rubber washers and metal washers as well as a bolt and some threadlock. I had to replace the rubber washers every year as they perished and shrank compromising the stability of the mount. I had to take a dremel to shape the large metal washers over my front mudguard, but this will vary with your bike's clearances. Next time: I will buy another one of these, but I won't leave the light permenantly mounted onto it as I think the weight significantly contributed to this failure. I'll probably have to replace it every 5 years of so as well as I don't want to risk wrecking a £150 light for the sake of renewing a £7 bracket.

It means fewer things on the handlebars and the front light is a little closer to the road which is possibly useful on unlit country roads. You need your own bolt to go through the front fork crown. May create issue with old style side and centre pull brakes with length of the brake bolt and some bikes which don’t have hole in fork crown. I’m happy but it’s often the little things in life that can bring most joy.

Superb bracket, very sturdy. Weighs 45g (Plus the bolt through the bike) so a little heavy but is very substantial. The regular flex right bracket is around 18g so not that much more, but this is very very secure. You will need to buy fixing to hold to the bike, but still an absolute bargain.

The threading screw is missing. They should also have a screw for this money

元々ライトはハンドルにつけていたが、折り畳み自転車であるため毎回つけ外しする必要があり億劫に感じていた。 そんな折にこの製品を見つけて購入，さっそく近くの自転車屋さんに持って行きつけてもらった（施工費は500円くらい） 足元を照らすため対向車に眩しい思いをさせないで済むのがとても良いメリットだと思う もちろんハンドル周りがスッキリしたというのも良いと思った！ 折り畳み自転車では尚のこと付けてよかった！

It is perfect!

Lo he instalado en una brompton tras cambiar la posición del soporte y ubicándolo entre las tenazas/cangrejo de los frenos y el guardabarros... miren las fotos..

Very good.

Ho acquistato questo prodotto per fissare la luce Cateye alla forcella di modo da aver più spazio sul manubrio della mia gravel e sono super soddisfatto dell'acquisto! L'acciaio sembra di ottima fattura e la luce è super stabile, anche nei tratti molto sconnessi con ciottoli; il che, per chi usa la bici tutti i giorni anche per andare in ufficio, è un plus molto importante. Il supporto attualmente viene fornito con vite di fissaggio e rondella in ferro da posizionare tra il supporto stesso e la vite. Sinceramente, io ho aggiunto anche una rondella in plastica onde di evitare di rovinare la vernice laddove il supporto sarebbe andato a serrare sulla forcella. Nel complesso comunque un ottimo prodotto, consiglio