VViViD+ Honeycomb Matte Black Medium Pattern Car Wrap Vinyl (1ft x 5ft)

Just open measure cut peel and gently add. Just keep out the air holes and cut to fit not fold and use a sharp knife, pair of scissors and other cutting tools. The texture and pattern are nicely detailed I just had to make sure I match the pattern to make uniform. Once fully attached just use a hair dryer on high as you gently use a ruler to gently press and after done. It can’t stretch and until heated it is as sticky as electrical tape but once heated and on it looks great. It was so much easier than painting and heat resistant to what degree. It is warm to the touch but never burned me. The adhesive is aggressive so make sure you have everything ready when using. It is not crazy about EVA foam but with the type I bought it didn’t work 100% but by adding a metal plate at the end of each section it stayed on. I tested some on metal and it made it water resistant it just wicked off. The ultimate test is a generic body suit. The pattern reflects mass effect and a batman costume. The nicest thing about ordering this is learning it can completely customize my bike and with strategically placed metal plates on a bike helmet I can make unique gear for my new hobby. DIY for others the recent project and making custom costumes has made me interested in doing this with people. I am pleasantly surprised by how good this was just has a little learning curve and once you learn it you can use it for anything.

Looks Amazing Seriously Updated the interior , Did not like the Wood Interior is almost complete it goes on so smooth I didn’t have to use the smoothing tool except for thin areas around the cup holder portion which was tricky but owing slow and patience was needed and it turned out Fantastic I love the Pattern much better than the overplayed Carbon Fiber I like different so Thank You , This was my very first time ever wrapping anything so it was not perfect but it’s good enough for us .

Works great durable good heat resistance stretches well can’t beat the price and looks great on my car

First time I ever used any kind of vinyl, as you can see from the pics I tried a lot of stuff (stripes go over the top, and I did the fuel door.) It looks really really cool. Really cool. It likes to be heated a little bit to work onto the surfaces when installing, and definitely needs the post-heating. Lots of trial and error for me. It is stiff, which I believe is from the mix of matte/gloss with the hex pattern, so a little preheating really helped. The pattern is also a little tricky in curves and concave surfaces. If you heat it too much it will distort the pattern, and that can happen in the tighter spots when you are forming the vinyl to the surface. On the interior pieces it is a little hard to get it to firmly stick in the tightest crevices where two pieces of material meet up, but being extra careful to seal and push those down with a tool/squeegee and heating them will make the stick. It looks really cool! As far as the exterior it was great, easier than the interior. There’s one caveat - I used knifeless tape to cut the stripes, and the hex pattern did make the edges a little jagged when I pulled it, I had to practice a few times and be really careful to keep it flat. Those edges along the stripes are a pretty “grabby” when I wash/shine the car now, too. I love how it looks, I had a lot of fun playing with it. The pattern makes for an oil slick kinda oasis look in the sun, too.

I’d buy this wrap again for future projects. The wrap is good quality. Has a little thickness to it which is perfect for me. The graphic of the honeycomb is amazing. You can feel the graphics of the honeycomb which is pretty cool. It sticks on well to wood. It stretches well when you add heat into the process. Good product, going to buy again for other future projects. Well worth it.

So far this has been great wrap. Easy to work with, good stretch, and good adhesion. Wrapped a few interior bits without any issues. I prefer to use a small shop heater rather than heat gun to heat the wrap up, but to each their own.

Great quality, Good heat resistance, value for the money is a no brainer, very wrinkle resistant, easy to apply and cut, very durable as its been test on numerous produce so far, adhesion is top quality!

I'm not a pro, but would easily call myself amateur plus. I wrap, tint, and overall put film on all kinds of automotive and home applications with 99.9% successful results. Whenever possible I use Vivid products, they always tend to work well and have great quality but the large honeycomb pattern is not the one you want. I purchased 10x5 ft to do a hood (more than enough) and some spare pieces, and have some left over. Unfortunately it did not turn out that way. The pattern looks nice, but it makes the film very weak along the honeycomb lines. I was laying the first piece in my garage on a 60 degree day, no additional heat applied and my fingers split the film while readjusting the fit on my hood. Ripped straight down the pattern line. I removed that piece and used my other 5x5 ft piece to start over. Towards the end of the second piece I could not get the film to shrink or curve at all. It wanted to bunch up and crease. Again, I've wrapped many hoods, not my first time, so I know how to do this, it just would not shrink. The entire $90 piece and I didn't get a single hood out of it. Had to trash both pieces. Pros: pattern looks great; works well on small, flat applications; creases come out with minimal heat; air realease works well Cons: Weak due to pattern; no ability to curve in a single direction or tension in multiple directions; can't lift and shift without risking a rip; out $90 on a 5x10 sheet because it won't work on a larger application.

I recently purchased the VViViD+ Honeycomb Matte Black Medium Pattern Car Wrap, and I couldn't be happier with the results! The unique honeycomb pattern adds a striking and modern look to my car, making it stand out in the best way possible. The matte finish not only looks sleek but also feels durable and high-quality. The installation process was surprisingly straightforward, even for someone with minimal experience in car wraps. The material is forgiving and allows for repositioning, which made it much easier to achieve a smooth, bubble-free application. Additionally, the air-release technology embedded in the wrap ensures a clean finish with no trapped air pockets. I've received countless compliments on the wrap, with many people assuming it was a professional job. The durability is impressive as well—it's held up wonderfully against various weather conditions and car washes without any signs of peeling or fading. Overall, the VViViD+ Honeycomb Matte Black Medium Pattern Car Wrap exceeded my expectations. It's an excellent way to give your car a fresh, distinctive look. I highly recommend this product to anyone looking to elevate their vehicle's aesthetic with a high-quality wrap.

I think there’s a QC issue with these wraps. I bought two rolls and the first roll I used had major issues with sticking. Haven’t tried the second roll yet but most of the first roll was wasted with all kinds of adhesion problems.

Muy bonito y original el diseño. Llegó a buen tiempo. El vinilo es de buena calidad y recomendaría que quien lo coloque sea profesional.

The product was great and beautiful, I had one minor issue, and I couldn’t belive a human being actually call me to “apologize ,and explain to me what had happened.” Now that’s customer service . Can’t remember his name but thank you so much, things happen and having someone care enough to call , is on another lever of customer service Leonardo S Saskatoon SK