JESLED 10-Pack 8FT LED Shop Light Fixture, 90W 12000LM 6500K LED Tube Lights T8 Integrated, Linkable, Plug and Play, High Output, D Shape 3 Rows 300 Degree Lighting for Garage, Workshop

Lights were easy to install in our barn/workshop. Stalls and work tables are now very well-lit. Unfortunately, a couple of months after hanging them, two of them burned out. Customer support offered to refund us for the two dead lights, but we were more interested in getting them replaced than getting the money back. Customer support was prompt, very easy to work with, and we have recommended these lights to several friends.

These lights work great. At about $6/per light, they're also incredibly inexpensive. They give off great even light without the weird flicker or delicacy of florescent tubes.I bought them to use in a video studio as low cost quasars and other practical background effect lights. They're lightweight enough to tape to the wall or stand/support without much effort. That said, they do oscillate on video above 120fps.I also mounted two to the ceiling in my home, connected through an overhead light bulb to outlet converter. I think it works great. In the photo you can certainly see the color temperature difference between the 3000k and the 6000k.Wiring in the units is also very straightforward. In the future I'll likely pull out the LED strip and mount two strips in one housing, or even make a smaller housing.Everything came in a pretty heavy duty box. Each light came individually boxed, with an additional box full of all the plugs, wall mounts, and screws and everything. I didn't notice anything missing or broken. Great deal if you need 10 lights!

Overall I'm really happy with the lights but there are a couple things that could be done better. This review is for the long light bars in the picturesPROS:Installed the lights about a month ago, they have a nice wide throw and put out an impressive amount of light. I mounted 6x 10ft lights in a 24 x 50 foot area at about 12 feet off the floor and spaced in lines of 2 about every 12 feet, they put out a workable level of light with enough overlap that I don't have any hard shadows. Wiring was very straight-forward: yellow is ground the two white are hot and neutral. The included cords work well, although the switched cords allow power to bleed through so if the cord is plugged in and the in-line switch is off, the LEDs are still "lightly" illuminated and glow. (think very dim nightlight). If you put them on a switched circuit it's not an issue.CONS:The mounting clips supplied with the lights are nearly useless, they will hold the light up but are VERY weak and the slightest movement or vibration (slamming a door) can cause the light to fall. Because of their design, the lights must be flush mounted, there is no provision to hang them. I ended up hanging a pipe from my rafters and then used copper wire to attach the light bar to the pipe by wrapping it around. I wouldn't recommend using zip-ties or cord, the back of the lights gets pretty hot. The upside to all this is that the pipe ends up acting as an additional heatsink.My only other complaint is that these lights introduce A LOT of radio static, even if they are operating on an isolated circuit. I keep a radio on in my shop and reception is clear until the lights are turned on... once they're on they create an annoying level of static. I have other LED lights that don't have this issue.

These lights are amazing. Bought them for our barn , which is 32' wide, 36' deep with 14' ceiling. Hung them at 12' above the floor. One row of three lights on the left side and one row of three on the right side so the doors wouldn't block the light when they are open. I thought I would need a third row down the center, but these lights are so bright that it wasn't needed. Easy to install, nice and bright. I highly recommend them.

These lights are easy to install and VERY bright. Honestly they are a little too bright. The glare they give off to the sides hurts your eyes. I ended up frosting the lenses. I used some 220 grit sand paper and frosted the fronts of them. It probably cost 20% of my light output, but got rid of 60% of the glare. I am happy with them now, but would order frosted and dimmable ones in the future if I did it again. Then I could choose to have the lights normal or like the surface of the sun!

Had now for 4 years just in last 2 months 4 light stopped working and one started melting lucky I was in shop when happened now don't trust them to be on if I'm not in the hop

I bought a few lights a couple months ago, installed them love them brightness was unbelievable, but then I noticed one light burnt out. I have attached a photo I don’t understand, and I hoping that they can make it good, if not, I’m really nervous about buying more lights from them. I have a whole Other area that I would like to purchase light for, but we’ll see if they make it right overall great lights, but be aware of that they could burn out quickly, is it worth the investment?

I was skeptical when i ordered these as they are so much less expensive than conventional 8' lighting. We used them in our warehouse. One run we set at 8' and the rest at 12'. 12' is stretching their effectiveness but they light it well enough for a warehouse. At 8', it is fantastic. Each height gives a daylight feel, the greater height just feels like a slightly cloudy day. We have order more and will replace all our fluorescents with these as the ballasts and bulbs expire. They are all ply and play, no wiring needed, just a receptacle. Preferable a switched receptacle. Note; 9 of the 10 fixtures were perfect, one flickered. Jesled responded immediately that they were sending us a new fixture. Great product, great price, easy to install and top notch service.