New Replacement Internal Cooling Fan for Xbox One Series Compatible with Part Number PVA120G12R-P01 I12T12MS1A5-57A07

Fits like a glove, works no problemsTake care when disassembling your xbox one it's a little tricky to get the outer cover off but then it's easy as pie. I suggest looking up some YouTube videos on disassembling your xbox to use as a reference...

It isn’t “exactly” the same as the one from my Xbox, the clips are a little smaller, but my original was rattling and not cooling enough. One of the clips broke while I was installing it (had the old one on and off and never had an issue) but this did not affect the performance. It fits, it spins, and it is quiet. Well worth it.

First off i get the fan and one of the clips was barely hanging on still and fell rest of the way off further with me just touching it with no pressure. Then i get to putting the fan in powered up. I then try to put my metal casing back on to realize it wont all go back on. I got my tape measure and measured the fan width it was 1 inch exact the new fan width is greater then that. After now looking at the reviews i see im not the only one i usually read reviews on everything i purchased some how i didnt on this cause wasnt too expensive and seemed like a no brainer cant mess this up... guess what. They did just that. Wrong part and need to take out of description will fit xbox cause it dont.

Came as advertised. Does not include heat sink fyi. Prior to purchasing, I had been having issues with my Xbox One overheating due to the fan shutting off spontaneously during short periods of gameplay. I installed this fan in less than 15 minutes, and I was back in business with zero issues to date! My Xbox is almost five years old with a lot of hours on it, so I'm glad this was an easy fix!

I bought this product for my Xbox One cause my old fan was making some high pith sound. After a few YouTube videos I took fate in my own hands and remove the casing from my Xbox One. Replaced the fan and cleaned the internal parts with some air and put it back together. When I powered on the Xbox it was actually LOUDER than the old fan! It wasn't a high pitch, it turns out that the bearing was a little loose which made a weird clacking sound. Replaced the fan with my old fan and did more research (looking at the model of the old fan) drilled a hole and added some lubricant in the bearing system and bingo, better than new. I'll hold on to this fan as an absolute back up.

The fan came damaged missing the two securing clasps on the left side to anchor to the heatsink. As my current xbox fan was on its last legs and it took a week to arrive I don't have the time for a return and shipping a replacement. it'll have to do but I'll return if I experience any issues with my Xbox.

My Xbox One S fan had a really annoying rattling/ticking noise coming from it and based off researching this issue I found its because of something to do with the bearings. So I tested my luck by purchasing this fan. This fan was made for the regular Xbox One because the fan size is slightly larger than the One S fan as well as the fan shell. But I said screw it & tried squeezing this one into my Xbox One S & it’s a very tight squeeze with the top Xbox One S shell on. After I bolted everything on, I tested it & THIS FAN IS EXTREMELY QUIET!!! Not one single rattle/buzzing noise coming from it!!! :D I’m extremely happy with this purchase.Note: if you know how to remove the bearings and fan from its shell properly, I recommend removing both fans from their shells & placing this one into the One S shell for a much better snug fit. Unless you’re lazy like me & just wanna squeeze this entire one into the One S ;)I have not tested this on the Xbox One “X” so not sure if this will fit that one.

Swapped it out with the original one in the Xbox and now have no more overheating issues! Woot!! Doesn't get as loud either which is a plus. It was super easy to install, but I've experience working on computers and my Xbox, so be careful if you decide to do the swap!