✨ Elevate Your Space with Style and Functionality! ✨
The ORGXpertLift Top End Table is a versatile and stylish addition to any small space, featuring a lift-top drawer for concealed storage, USB ports for charging, and a sturdy design that supports up to 110 pounds. With easy assembly in just 30 minutes and lockable wheels for mobility, this table is perfect for modern living.
Product care instructions | Wipe with Dry Cloth |
Material | Alloy Steel |
Product Dimensions | 59.99 x 24 x 65.28 cm; 10.79 kg |
Special Features | Adjustable Height, Waterproof, Wheels |
Item Weight | 10.8 kg |
R**N
Superb Tables
Don’t let my 3 stars on the ease of assembly misleads you. These are pretty simple to put together after you skip some on the instructions that comes with the units.We bought three of these and the first one, it took my wife and I both to assemble, following the directions. The second and third, I put together 95% by myself. I had her hold steady for the last bit; however, I could have managed on my own.The instructions are to build bottom up, which is fine till reaching the top “box”. I found due to the tight space, the best way to assemble was ship the box bottom until the end. Lay the pieces out as needed, watching the orientation of the box and its bottom.Sliding the bottom in last allows it to stay out of the way when putting the bolts into the metal frame, especially where the spring tension arms are concerned.The outlet and USB charting works great, and these look fantastic. Very practical for what we wanted and current living room layout.If I had any complaint, I wish the middle shelf did not connect to the middle support bar. And rather there were multiple holes available to raise and lower the shelf as needed. I understand why it is the way it is, the current setup keeps the hardware from being on the edge of the shelf, thus giving better strength and support.
M**I
Lift top end table
We need something narrow. Game changer here & very sturdy as well! I love the lift top feature for a small work space ANYWHERE you roll it. The 2 shelves below the lift, are perfect for a basket or store a laptop. This desk/end table also has outlets for electric!
B**.
Not bad for this type of furniture
It’s not IKEA, but not bad build quality. I was surprised how well the holes lined up. To us, it is decidedly smaller than we thought looking at the pictures, but the dimensions are accurate.If you try to put it together their way, it will be more work than necessary. First, don’t use their toy box tools. Recommend an electric screwdriver/drill with clutch, and a real Allen wrench set that you can hold like a wrench and turn the “KM” bolts. Why in a minute.I built the legs portion first. Leave all screws and bolts loose till you get it together. When you go to attach the cross bars with the KM bolts, the bolts are too short as noted in other reviews. Using my Allen wrench set, I tightened to its basic stopping point, then torqued the bolts a few more turns with the wrench. That bought me probably another 5 threads by drawing the two metal pieces together. Was sturdy when done.The two hinges are very stiff at first. I sprayed the pivot points with Teflon lubricant spray and flexed them back and forth a few times before I started to attach them. They work fine that way.Assembling the top, hinges, and drawer sides their way is ridiculous. You need to stand on your head, and can probably only tighten the screws with a ratcheting offset screwdriver. I built that part separately. Attached the hinges to the side pieces, then put the top upside down on a table and attached the the hinges to the underneath of the top. Very easy. Then take the leg portion, set it upside down on top/hinge assembly you just made, and screw together. Piece of cake. You have to wiggle the side pieces a little to line up the holes, the hinges will twist them a little, but they fit together correctly. And just be sure to slide the bottom of the drawer into place before you screw the drawer ends to the sides or it won’t be able to fit in. Then screw in the wheels, turn right side up, and screw the drawer sides to the drawer bottom. Add the electric box, and done.Final comment, also a repeat from others. With the electric pointing up, the drawer isn’t deep enough to plug in something like an iPad charging block, then attach the charging cable without bending the top of the cable connection over. Cable won’t last. I added a short, like 1 foot, power strip to connect that.Hope this helps.
G**D
Great purchase
Easy to assemble and makes the perfect addition to my recliner. The top and hidden drawer are for me and the shelves on the bottom are ideal for my cats to lounge on.
S**I
PERFECT SIZE
This looks great and the quality for the price is great. It is not huge, read the measurements. It was perfect for our space. The spring top is great to hide small things inside plus the plug inside is perfect to tablet or phone. Roller feet are lockable. Looks great and very functional.
ترست بايلوت
منذ أسبوعين
منذ أسبوعين