# PVC Ceiling Tiles

These Art3d PVC Ceiling Tiles completely transformed my space! The 2'x2' panels are lightweight, easy to cut, and simple to install. The white finish looks clean and elegant, and the material is durable and easy to wipe down. I used them to create a statement wall in my bedroom of a new build home, and the difference is amazing. Great quality and value for a 12-pack — highly recommend!

Loved the ease of installation, light weight, and ease of cutting/modification. The new ceiling looks fantastic!

Nice product looks great after installation. Not an easy installation, especially when you have to cut them to fit in place. Since they are patterned, you have to glue pieces together to fit properly. At least they are easy to cut with a scissors.

Beautiful in person!!!!!! I recommend having sharp scissors in order to cut. I used an oscillating tool, scissors and razor blade to get mine cut to size. They are plastic but very durable. It was tough at first on trimming them due to the 3D effect and some ceiling tiles not being full regular sizes. Please keep in mind the tiles you will need to cut! Other than that’s, they were bright. Easy to install, and light weight although the box is heavy. Good luck to you on your project! These worked for me!

These panels are made of a thick plastic material. If. You have to cut them, you have to use an electrical saw with a fine tooth blade. Because they are raised in places and flat, it is some work to make really clean accurate cuts. But if you can hang in there, they look really nice when you’re done

The tiles look gorgeous if you have complete grids. Unfortunately all edge tiles needed to be cut in my room and even with getting help from a contractor and following the video we could not get the final look to be as gorgeous as other product images. Ended up pivoting but would be a good product for those who don’t need to trim

I used this on a wall, instead of Bead Board. It's Beautiful looking, but hard to cut & glue. Pros: * Looks gorgeous. * Light weight means easy to move around. * Covers a ton of wall space quick & easy. * I painted over the edges only, & the color match to my bathroom white woodwork paint was perfect. * Hides a TON of flaws, if your walls aren't perfect. (Sand down the bumps first, though). * Flexible for easier positioning in hard to fit areas. * Scratch resistant. Despite trying to cut it with a Razo knife, it skidded right off, & no marks showed after. * Nothing sticks to it. I calked around it, getting some calk, & later paint on it. Both just scraped right off once dry. * Super washable. PVC is unlikely to hold anything on it, & a quick wipe should get rid of any dirt or spills. Cons: * Very hard to cut. Exacto Knife skidded right off it. Household shears were unmanageable. I had to go to Tin Snips, which cut through easily, but only 1 inch at a snip, & it left a bumpy & ragged edge. * Those Sharp, Ragged edges are a cutting / snagging issue for hands & clothing, & look awful. * It's hollow, so if you end on a half panel, you're gonna have to deal with big holes at the ends of the ridges. (I filled mine with calk, then painted, but it's not a great looking finish.) * Very hard to secure to a wall with calking/glue. It holds it in place - if you have a baseboard to tuck it into, but without the boards at the top & bottom like I used, I doubt it would still be on the wall. When I push on it, I can hear the calk moving behind it. (Also, the calk/glue just rolled off it with my finger, when I was doing cleanup, so it's not really stuck on the PVC - front or back.) * I think you might be able to tack it down with brad nails, but I doubt you'd like the look of it. I wasn't willing to risk it, once I realized the paint just rolled off with my finger in cleanup. I suspect it would leave divots, too, so I would not plan on using nails, unless you intend to cover them with wood to hide them. * Manufacturer says they can be painted, or glued, but neglect to mention what Glue or Paint will stick to it. My experience with it says glue and Paint Do not stick to it. Both just rolled right off with my fingers in cleanup - After drying. Will the paint stick, sure. Will it stay there if you bump it - I highly doubt it. Tips: * Use a baseboard & top rail, to hold them onto the wall, & calk/glue just to seal it to the wall. * Use a plastic putty knife to clean excess calk or paint off edges. (Or a Credit card, too.) * Someone else suggested using a hair dryer to soften it, & THAT was a Great Tip! It not only made it softer to cut, but also aided in smoothing out some of the ragged & bumpy edges from cuts. I used a metal Putty knife to smooth it, while using the hair dryer to soften it. Not a perfect edge, but way better than the mess I started with. Overall: This was a good solution to my small bathroom's wall imperfections, & I'm happy to have found it. That said, it was a pain to install, & I would not use it on a high traffic area wall, unless I had boards going all around it on all 4 sides. There's no running or roughhousing going on in my tiny bathroom, so no danger of people bumping it.

Very easy to install. It is hard to cut to size since it’s 3D but using a razor blade was helpful.

Pedí 3 paquetes y todos vienen rotos.

L'effetto è soddisfacente, ma le piastrelle sono troppo sottili, il montaggio non è facilissimo. alcune non combaciano perfettamente, ho dovuto rifinirle con bordi in legno e altri accessori per abbellirle e coprire i difetti di fabbricazione

halfway through putting these up and so far so good. They are very thin and light, as they'd need to be and are going up quite well. However, as they are thin, they can distort a little so the joints are not 100%. I believe there is a joint strip that can be stuck on (self sticking) that I will find, just to finish off neatly. They look good without being painted if you want white. For a large high ceiling they work very well. I used a cheap Toolfix adhesive.

Gute Verarbeitung, einfache Montage und sehr gute Optik. Empfehlung. Guter Verkäufer.

Très bien pour bas de mur humide