Zeberoxyz Upgrade Direct Drive Dual Gear Extruder Support Kit,with Stepper Motor, Easy Print Filament for Ender-3, Ender 3 Pro,CR-10,CR-10S Extruder Adapter(Dual Gear Extruder Support Kit- Motor)

Works well on my Voxelab printer, the only issue was the fan cover tab doesnt line up with the hole, so i trimmed the tab off and it holds ok. Other than that all you have to do is change the steps per mm settings for the extruder so it prints properly, make sure the gantree bearings are snug but not binding otherwise you will have banding and echoing in your prints due to the heavier extruder. Ideally you would best replace the extruder motor with a Pancake style motor but so far the prints are good quality and faster as i can reduce retract settings as it doesnt need as much retract as a bowden tube setup.I've not had any clogging since using this setup neither thankfully as its a little fiddly working on the print head compared to a bowden setup, but so far im happy with the kit.

First bought and extender plate that didn't have space or holes for a self-levelling thingy. So after a little more careful study of the adverts on Amazon I bought this support plate, intending to gradually upgrade to a dual gear device. Didn't work, this doesn't work without a dual gear extruder (as is clearly shown on the Amazon page, and I hadn't noticed). So I then bought a double gear extruder as well. This plate fitted perfectly and works well, if a bit fiddly. For an Ender 3 V2 the tube was a bit too long and needs cutting. Apart from that, all good.

Upgraded my Ender 3v2 without any major issues it was quick and easy to switch over and it added extra features and stability to my printer.Construction seems fine no major design floors all the screw holes were in the correct place. it did a good enough job

The Zeberoxyz Upgrade Dual Gear Version Direct Drive Extruder Support Plate is a must-have for 3D printing enthusiasts using Creality Ender 3 V2, Ender 3 Pro, Ender-3, CR-10, and CR-10S 3D printers. This upgrade brings a whole new level of performance and versatility to your printing setup. The dual gear design ensures precise and reliable filament feeding, resulting in improved print quality and reduced filament slipping. One of the standout features of this upgrade is its exceptional compatibility with flexible filaments, allowing for easy printing of intricate and flexible designs. The installation process is hassle-free, and the build quality of the support plate is top-notch. The Zeberoxyz Upgrade Dual Gear Version Direct Drive Extruder Support Plate has significantly enhanced my printing experience, and I highly recommend it to all Creality Ender 3 and CR-10 series users looking to elevate their 3D printing capabilities.

El producto llegó bien y en buen tiempo, llegó antes de lo previsto pero, lamentablemente su manual es demasiado simple y hay una serie de cosas que te pueden poner en el para evitar malos montajes, hay que aumentar el flujo en mi caso mi ender 3 pro no hacía bien los techos, y la manguera viene más grande por milímetros por lo que tube que cortarla.

Bought this for use on an Ender 3 Pro which has a linear rail on top of the X-Gantry. It definitely has less flex than the old setup that used long screws and spacers with the budget direct drive setup. You definitely need to re-level your bed it does put your nozzle closer to the bed. It works with any of the 2 BL Touch brackets as well. Only con id the pneumatic fitting on the under side of the extruder is pretty much blocked if you want to use a clip but beyond that Good product.

After reading through the product details over and over, and looking at the product images, I finally determined that it came with the hot-end assembly. It does not come with the hot-end. I wish the seller would have made that clear, and not put deceiving images on the page.Besides that, switching it out went well, and it works as it should.

The media could not be loaded.  I had had a clicking noise since getting the dual gear extruder case in point it’s because of the strong of the orange spring it’s too strong for it and hits the limit of the step motor making it click.My fix was a zip tie since I messed up my original grey spring.

This did not work on the Ender 3 v2 the carriage was too loose. Returned and purchased one from a different company and that worked.