Rocksolid Metallic Floor Coating contains pearlescent and iridescent accents that produce marbleized gleaming finishes. These lustrous floor coatings are the newest solution for commercial, retail and residential customers looking to set their home apart from others. This stunning, easy to install metallic system is great for any garage, basement, bathroom, or interior living spaces. 20X stronger than epoxy. Walk on in 8-10 hours and drive on 24 hours. Extreme high gloss is impervious to chemicals. Low odor and VOC free. No hot tire pickup. Self-leveling. Easy-mix burst pouch. FOR BEST RESULTS Install between 40°-90°F. KIT CONTENTS Polycuramine Burst Pouch, Metallic Tint, Polyamide Roller, Stir Stick and Instructions.
G**A
Need 2x the product, that only does 1/2 of what it is advertised to do.
Major Highlights:- One pack leaked in the box and made a sticky corrosive mess.- Product only covered about 30-40% of space advertised (608 square feet actual vs. 1600-2000 advertised)- Bubbles all throughout the flooring, despite following all instructions to the letter - requires sanding, recoat = double the cost.- Strong fumes filled our whole house for about 1.5 days - good ventilation is necessary.- The rollers are poor quality - buy your own high quality rollers.- All problems above aside, the color and patterns look good if you follow the instructions carefully.I spent $1300+ on 10 boxes (up to 2500 square feet) of Rock Solid Metallic: Silver Bullet color to redo our new basement floor. I used about 8 of them (1600-2000 square feet), following the instructions very carefully, and only covered approximately 608 square feet (38x16) as opposed to the 1600-2000 square feet they should have been able to cover as advertised. 1 pack (est. $125) leaked inside the box during delivery and made a terrible sticky corrosive mess.I followed all instructions very carefully to the letter, and watched about a dozen different videos to make sure I was doing everything right. The color looks good (a little darker than expected, but not bad), and the pattern/metallic effect turned out good, but there are tiny bubbles all throughout the basement which is a real $1300 + Labor eyesore...Now I have 2 boxes left that I don't think is enough to cover the remaining 400 +/- square feet, a 2/3 finished basement floor, and the best recommendation I can find to fix the bubble issue is to sand the whole floor down and do another coat. $1300 for 2500 square feet just turned into $2600 + Labor Intensive Corrective Measures for only about 1000 square feet... If the cost was reduced to 25-50% of what they are currently charging (currently est. $125/box), then it would be worth it. Until then, I wish I could get 75% of my money back for what I actually received, because this product is only about 25-50% efficient when comparing actual vs. advertised results.
R**N
Looks Great
This was applied to a concrete den floor. The prep work is the most time consuming and will go a long way in producing a quality finish. The only reason I rated this product with three stars is because the rollers provided with the kits are very poor quality. Even after de-linting the rollers there were fibers that came off in when applying. I highly recommend anyone using this to do away with the supplied rollers and purchase a quality roller that will not shed or possibly a neoprene roller.
C**K
CHECK THE SILER MIX PACKAGES BEFORE YOU APPLY
THE SILVER PACKAGES WERE GUMMIE AND IST BAG WAS NOT NOTICED UNTIL PACKAGE WAS OPENED AND THE MIXTURE WAS NOT EASY LEAVING THE BAG. THEN WHEN APPLYING THE MIXURE BEGAN TO SEPERATE AND THE COVERAGE WAS NOT GOOD AS THE CLEAR WAS SEPERATED FROM THE PAINT COLOR. THIS IS THE 7 TIME I HAVE BOUGHT AND USED THIS PRODUCT, AND THE SECOND TIME IT HAS COME DEFECTIVE FROM DIFFERENT SELLERS. I WILL UPDATE AFETR MY REQUESTED REFUND.
A**R
This stuff Rocks!!!
I converted a garage to a studio apartment 4 years back. I wanted to coat the concrete slab floor. I purchased bags and 20+ bags of special powder stuff, pluse a sealent.4 years ago I did this the hard way. Multiple heavy bags of powder had to be mixed with water, then the dye calibrated. It was a nightmare to DIY. Add to that the sealent stank to high heaven for weeks.Fast forward to September 2020. I was doing upkeep during a tenant transition which included the floor which had cracked. I patched the floor (different product) and used the Rock Solid metalic and added the anti skid additive both by Rustoleum.It looks smokin! It appears as if it is wet - but it is dry and hard as a rock (pun intended).It took 2 kits and I added 2 bags of anti slip stuff to each one to do 300 sqft.Important to note, this stuff dries super fast, make sure to keep stirring the mixture. It is definately a 2 person job because of the drying time.
D**H
Goes on way too thin
For the cost of this product, it really should be a single coat product or cost half what it costs. I have had to stop using this product mid project as it is still transparent. We have ended up needing to put down a base coat of gray primer and then applying this on top.
Z**A
Good product and good results
Good product and good results, I would recommend buying spike shoes and also hand mix the ingredients in order to reduce bubble formation. I has been a couple of months and it seems to be resisting well. I do park my car every day in the garage and also do some wood work.
C**D
Great product, great service
This is a great product at a better price than big box stores! Need 1 box replaced and it arrived within 48 hours, highly recommended
D**H
awesome
This stuff is awesome. Its way thicker than paint, so its not as easy to roll it on and count on 100sqft per kit to get full coverage.
ترست بايلوت
منذ أسبوعين
منذ أسبوع