Advanced Sight Adjustment Pusher Tool 2.0 Enforced Universal Authentic

Very easy to use. Solidly built product at a fraction of what others charge for similar items. Very easy and straight forward set-up. All surfaces that come in contact with the slide are nylon.As with anything that is universal. It is possible that not all gun slide will fit the supplied blocks.There are several blocks that come with the unit that make it adaptable for most guns. The blocks are made of aluminum to make it easy to change the shape of the blocks to fit your gun. You can modify the blocks to fit your particular slide or you can be make a block of hard wood to fit.The bottom block is easily adjusted to adjust the pusher to the correct position.The pusher is made of heat treated steel. This gives that pusher a long life.I used this product to remove and install rear sights on a Glock 19 pistol along with my other pistols. Slide fit securely in the pusher during the entire process.If you are even considering removing and installing rear sights on a handgun, this is a must have tool. There is very little risk of damaging the sights as is possible for those who use a hammer and punch to remove and install rear sights.You can’t go wrong with this product.

Th package was good and it got here quick the case is good and such.The thing is it looks used,,now it could be the factory socket left marks on just one screw as the paint is chipped off where a socket should fit or someone sent it back and it got kicked back into inventory to be sold as new, I'm not sure which.The other thing is that none of the blocks in the kit have the same thread pattern as the bolts provided you can get one or two threads on them then ya have to go to a wrench and it re-threads the bolts.It's not huge problem just looks like QC is lacking. I used it on my glock per instructions and it did leave marks on my mepro rear sight, it does work though but kinda feels clunky.Not worth the trouble to send it back I will just modify it some to work better but I probably wouldnt buy another or recommend it to anyone. =(

Purchased the sylvan arms advanced sight tool off eBay. Was skeptical because this was a gift for a relative and was concerned whether or not it would work properly. I mean who can make a kit that has all of the adapters to clamp the slide for multiple pistols without damaging it. Well I'm here to say that when I used this, I was impressed, Sylvan Arms has made a reasonably priced product that works well. This was used on a sw shield 40, 3 glocks and a Kimber without any issues.The kit is simple to use, comes with everything you need to make the proper adjustment to your front site. After you safely disassemble the slide from the frame, you select the proper blocks, install them, place the slide in and tighten the clamp. The use a small wrench to turn the head head to move your front side, a wrench isn't necessary but allows you to use decent control to make small adjustments.The only improvement I would suggest would be to machine a relief for the front spring tang on the slide to fit for use on M&P shields, either that or make it so you can move the pusher detail fore or aft to align with your site. For the shield we had to clamp it in at an angle for it to work for us but wasn't a major issue.The recipient of the gift was very pleased with the quality and ease of use and I'll be checking out the pamphlet of other sylvan arms products to see what else they have.I would highly recommend this product to anyone!

Such a simple tool and they couldn't even do it correctly. First, The blocks have cutaways to allow the bottom rest to raise up. There isn't enough to do this, the blocks are too big and/or the bottom rest is too long. Second, the screw for the bottom rest interferes with the slice you are attempting to change the sights on. There isn't enough room. In order to fix this and make it operational, I can just make my own from scratch. It also looks like it had been opened and return previously, now I see why. I'm returning this now.

Universal means universal. The kit includes a bunch of different fittings to make sure that you are able to make the right adjustments without damaging anything. It came setup from the factory in a nice case and I was able to complete the job I needed it for within minutes of it arriving. Not only do you get the pusher for the rear sight, but you also get a tool for the front sight, and it also came with a tear down tool for disassembly. If youre looking to do any kind of sight adjustment or replacement, this kit is the one you need.

What should work fails by key design flaws. The height adjustment screw is always in the way. This was true for a glock 23 slide and two springfield xd slides. The aluminum spacer/slide blocks were all too wide. The nylon/plastic protectors would not stay on. I had to eventually make my own spacer out of wood.I really wanted to like this kit... I have a few more slide to do and just gave up. I started using a hammer and pin. I cannot wait to return this product. Very disappointed. I will find another one that is not design like this one.

I have never used one of these tools. There was a little learning curve. After trying a few pieces I learned which ones to use on my gun. Sight was an original one did not come out with hammer but did with this tool with no damage to gun. Easily put in new front sight and was able adjust to where I needed it. I then decided to change out another gun sight. Easier the second time. Love it.

This came with two different sight removers. One that was offset to remove front sights. Problem is it will only work to remove the sight. There is no way to use it to install the front sight.This is because one side of the off set is angled for angled sights. It is impossible to use it to reinstall it. I now must go out or modify what I have to make it work.Would be nice to have 2 different offsets. One for vertical signs. One for slanted sights. They did not think this out.