1X DS3218 Update servo 20KG Full Metal Gear Digital servo Baja servo Waterproof servo for Baja Cars(Control Angle 180)

Works great. Great price. Aluminum mid case is a plus. Steering arm is stout and tight clamping. Only issue is the connector is not keyed and wire colors are odd so took a little trial and error to get it hooked up the right way. Power lead is an inch or two short to go with exactly the same routing as original on the Traxxas TRX-4. You can stretch it a little and get it hooked up without an extension but an extension may be a good idea.

I use these on all my bashers and oval cars. They are far from protek and savox but definitely work well for my applicationI've had a couple of them for a year or more and still going strong

The media could not be loaded. I was able to use the trx-4 upgraded metal servo horn on this without issue. I have about 12 hours of running on it, Including deep water, mud, and tumbling down the side of steep hills. So far it seems to be a great replacement for a TRX4 stock servo.The only real problem is the cable is a little too short for the TRX4, you're gonna want an extension. (You can see cable length difference in photo I posted) It can be done with no extension, but it will be ridiculously taunt, making it so you can't rout the wire down the frame rail. This results in it running directly over the trucks main motor, and it will be in the way if you need to pull the main motor out.Speed appears to be identical to my stock 2075x. You can see in video both servos running on channel 1. Strength seems slightly better than stock. Center is a little mushy not gonna be good if you need laser precision. The stock Traxxas 2075x servo seems better in that regard, but it's also 3x the price.The horn's center and the servos center were off by about a half a tooth. So no matter how I put the horn on it would be either slightly left or slightly right, causing the entire trucks steering to be out of whack. I would get too much turn to the right where the wheels would be hard against the stops, but left would not go far enough or vice versa. Remedied this by adjusting the drag link length on the truck. This is not an uncommon issue with servos in my experience. Getting the center just right is important not just so the truck has equal steering authority in both directions, but also to save unnecessary strain on the servo and the trucks steering linkages. If the servo can never move all the way to the proper position it will get hot trying and eventually burn up.Overall very satisfied for the price and will update this review when/if it fails.

Nice servo . Put on Arma gorgan . Works well. Speed could be a tad better but not bad for the value

Thanks

The media could not be loaded. Great servo for the money, not the fastest but more than adequate for a basher

I really wasn’t to sure about the power at first but this thing is NO JOKE and it’s just the 20kg. I have it on the front of my Wraith and get hung up in rocks and I’ve literally pushed I’d say about a 10lbs rock aside on more than one occasion. I couldn’t even believe it I had to call out the ole lady to show here cause I just got blown away. Thank you folks for a great servo an good price

I got this servo a few months ago, but due to availability of the Tamiya rc truck kit I ordered... i just got the kit together and the servo installed. Now the kit isnt a large rc truck, the Landfreeder. So with this in mind, the servo seems fairly weak. At a standstill, the wheels do not turn to the endpoints. It is quick yes, seems sturdy as well. The servo also seems to be finicky with the kit it is paired with. I was testing this servo against a stock Tamiya steering servo and I had problems. I did a usual test of running the rc beyond the controllers reach to see the reaction. With the stock servo the truck just stopped. No reaction out of range. With this servo installed, the truck went out of range and the servo went haywire. Constant movement and did not stop. I figured it might have been a fluke. So i checked the connections and wire placement, also move to a different area so to minimize interferance. I ran the truck out of range, same reaction. This time, though, within seconds the steering servo snapped the mounting arm off of the steering strain saver. The part the servo connevts to that is two pieces held together by a long screw and spring normally. So i had to buy a new one. I have tried this servo in one other rc and the strength remained sub par, but was less jittery and random in movements when out of range.