CNC Spindle Motor Kit, 500w, ER11, Brushed

Very happy with this product good quality well packaged

This was a warehouse item at reduced cost. It came in original box, has all the heatsink and crimp terminals. Has the PSU, working. Has the spindle motor, working. Comes with a 10mm collet installed in the mount. Comes with the motor mount and 4 bolts (won't be using as my CNC already has a suitable mount). Comes with the small reel of cable (won't be using). The only issue I've found (so far) is the shrink wrap on the collect set was open and although there is a 10mm 'unopened' collet in the pack, meaning I have two, there is no sign of the 4mm collet :( Given the reduced cost, I can't complain if thats all thats missing given they are easy enough to get, and buying just the PSU or the motor on their own would cost more than I paid for the whole kit.

Cumple lo ofrecido.

I recently purchased the Daedalus CNC Spindle Motor Kit, 500W to upgrade my Genmitsu 4040 Reno, and I’m thoroughly impressed with the results. Here's my experience: Installation Wiring up the spindle was incredibly easy. The kit comes with clear instructions, and everything fit seamlessly with my existing setup. Even for someone with minimal electrical experience, the installation process was straightforward and stress-free. Performance The performance improvement over the original spindle is remarkable. The extra speed and power provided by the 500W motor have enabled me to: Use a much wider selection of bits. Cut through tougher materials with ease. Achieve smoother finishes on projects. Efficiency One of the most noticeable benefits is the time saved on projects. With the increased power, I’m able to complete jobs significantly faster without compromising on precision or quality. This upgrade has genuinely transformed the efficiency of my workflow. Important Consideration Keep in mind that you will need a relay to control the spindle within the software. Without it, you must manually turn the spindle on and off using the speed control dial, which can be less convenient during operation. Overall Impression The Daedalus CNC Spindle Motor Kit is a fantastic upgrade for anyone looking to boost the capabilities of their CNC machine. The combination of easy installation, enhanced performance, and improved efficiency makes it well worth the investment. If you’re considering an upgrade for your Genmitsu 4040 Reno or any other compatible CNC, I highly recommend this spindle kit. It’s a game-changer!

Excellent and quieter than the original spindle/router motor. I specifically got this as I haven't yet figured out mach3 and/or linuxcnc and wanted to ensure I had control over the motor. The previous motor sheared the main shaft and also the controller was getting too hot and going into safety. This one is as described. And the collets appear to work. I only used the 1/8" so far. Took about a half hour to go through everything. You will need to provide a power wire from mains to this. I cut the end off a pc power cable

Llego muy rapido, totalmente satisfecho vino de regalo Un collet extra (12 total) y Unas pinzas las cuales no decia qué llevaba, lo acabo de probar y Todo a la perfection la recomiendo.

Correspond à la description. Utilisation à la base piur une cnc mais pas le bon model donc je me suis fabriqué un petit tour pour faire mes flèches de queue de billard. Au top du top. Je recommande.