MUSETEX ATX PC Case Pre-Install 6 PWM ARGB Fans, Polygonal Mesh Computer Gaming Case, Opening Tempered Glass Side Panel Mid-Tower Case, USB 3.0 x 2, Black, NN8

Very impressed with the number of features and RGB for the price. Comes with 6 fans all connected to a splitter for power and RGB. The build quality is good, and I did not feel anything was going to bend when I was attaching the hardware. The PSU cage felt ever so slightly small when attaching cables since the drive bays are next to the PSU, but I cannot truly fault that since you can generally run the cables before fulling seating the PSU. I like the dust filters but wish the front panel connected with more than just plastic squeeze pegs. This case came with everything I was looking for in the build for size and cable management.

Great case - love the RGB fans and glass side window! Installing my PC build was easy as there's plenty of room to work in the case. I'd recommend this case to others

Love this case. I LOVE RBG and this is my first PC build. Recommend.

Just did my first ever custom build using this case. The case itself is big enough to fit all my parts adequately. Depending on the orientation of your pc cooler fan it might be a little tight toward the top when you tighten down your motherboard. It comes with the stand offs that will be used regardless of motherboard size pre-installed. The rest will be loose in the bag with the screws. The stand off locations were clearly labeled to indicate which hole locations you need for specific motherboard sizes. There were also two more stand offs installed toward the bottom locations for full sized ATX boards. I did have to move one into the mini-atx holes, so if you're using a mini and think your missing one or in the screw bag I would look for those two. Both of the side panels come off and go back on very seamlessly. All of the front panel wires were preinstalled into the panel so that all you have to do is plug in the motherboard ends. I did have to remove the rear fan because my mother board (Aorous B550M Elite) has a piece that it would have rested on by the back panel (see last pic). The diamond mesh pattern on the front looks really awesome, especially contrasting against the RGB behind it.I only give it 4 stars because one of the pre-installed top fans seems to be defective. It lights up but it doesn't spin. I tested all the connections and re-checked the wiring diagram several times, but I could not find any issues there. I ended up swapping it with the fan I removed from the rear, which spun right up with no problem. That being said, the 5 remaining fans seems to be cooling everything just fine so far. I have not had any overheating issues as of yet.All in all this is a good case.Edit: I contacted Musetex about the fan that was dysfunctional. They suggested some ways to test the fan at first. But after trying the tests, I still determined that the one fan defective. They are sending me a replacement fan, which it is coming from China so it will take a little time to get here. Overall, great and speedy customer service!Update: The replacement fan came in and is working perfectly. Only took 9 days to get here even from China. Great and speedy customer service!!

I've had this case for over a year and a half now, and I have no complaints. Everything still works as it should!

For an inexpensive case, this is a great value. Plenty of room inside, and very respectable cable management built in. I'm in the process of transplanting & upgrading a system for a friend, and it's been smooth sailing. The front panel is good looking and functional, providing great air flow. The inclusion of the 6 A-RGB fans is a nice bonus, and I'm a sucker for a hinged glass door panel, making it easy to get in and clean when necessary.

I was really worried about the noise of 6 case fans all humming at the same time. I was also worried that my motherboard only has one slot for RGB but I assumed correctly that the LEDs don't have to be powered in order for the fan to work. My CPU fan is plugged into my only RGB slot. The case fans spin, they just don't light up. Which honestly is perfectly fine with me. I'd disconnect the CPU fan LEDs too but the wife won't let me.My computer is actually more quiet in this case than it was in the previous case. It's like the case mutes all the hard drive, CPU fan, and other electronic noises. I thought it wasn't working at first because my monitor wouldn't come on and I didn't hear ANYTHING. (Tuned out to be a problem with the monitor) You can't hear the fans, no matter how hard you try. You can only tell they work because they are spinning.Inside a computer case, an inch feels like a mile. This case is somehow still roughly the size you'd expect from an ATX case but at the same time, I have a lot more space for that huge GPU than I did in the previous case. It's not a big case but the inside feels much bigger. It is slightly taller than my previous case so if your space is limited vertically, you might want to check the product specs before purchasing to make sure it will fit. In my case, it still fit but I felt like the top fans might struggle so I moved it.Speaking of which, things are in kind of weird places in this case, at least from my perspective. The power supply is on the bottom. I'm used to them being at the top. Little tip. Take both sides off the case and you'll see how to get the power supply in the proper place. The hard drive mounts are also on the bottom instead of in the front under the DVD like I'm used to. There is no place for a DVD player that I've seen so if you need a CD or DVD player/burner, this case isn't for you. Luckily, I live in 2023 so I don't need those anymore.I have both an old school platter type hard drive and a newer solid state drive. Mounting the old school hard drive was a little tricky. Being right against the edge of the case made it difficult to hook up the power and data cables. I still don't like how hard the cables have to bend but it will probably be fine. Little tip. Hook up your solid state drive to power and data and then put it in the slot and mount it. Also, the old school hard drive mount has two screws on the outside of the case on the bottom. If you take the whole mount out, you can access the screws on the side on the hard drive. Once you get the hard drive installed inside the mount, you can mount the mount inside the case.Overall, this case is a huge upgrade in every way to my old case. 10/10 would buy again.

This case has insane airflow and lots of RGB fans included! Easy to build in, plenty of cable management space, good FP IP, low noise on the fans, good USB support.