SIMADRE 50DP PILOT ARC 50AMP 110V/220V PLASMA CUTTER

الوصف

Specification： •Equipped by WSD-60P High Performance Safety Guarded Pilot Arc Cutting Torch - DUAL VOLTAGE cutter •This machine comes with wsd-60p pilot arc cutting torch and ground clamp and cable, air filter/regulator. •The newer semiconductor circuits with genuine Toshiba MOSFET component in this machine is designed quite well. Cooling system is using advanced Germany equipment. •With reasonable care it should provide many years of trouble-free service. •Automatic sensing of incoming power source voltage and frequency 120V/240V-50/60HZ (functions between 90 & 260 volts.) •Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm. •Machine is equipped with a large cooling fan and is thermostatically protected for a longer life span. •Advanced inverter technology means high cutting performance. •The newer semiconductor circuits in these machines are extremely well-designed. With reasonable care, your cutter will provide you with many years of trouble-free service •Plasma Cutter is 3/4" rated with 1" severance cuts •CE, CCC, CSA and ISO-9001 certification Specification Parameters: Model Pilot Arc CT-50DP Voltage 110/220V Available Duty Cycle Cycle 60% at 50 Amps and 100% at 30 Amps Cutting Thickness 5/8 inch clean cut with 7.5 inches per minutes; 0.8 inch clean cut with 5 inches per minutes and 1 inches severance cut with 2.5 inches per minute Rated Ouput Current 50 Amps under both AC 110V and 220V Frequency 50 and 60 Hz with operating air pressure as 75 psi @ 5 cfm Package Includes Plasma Cutter - Inverter Unit, Ground Cable & Ground Clamp, Pilot Arc Cutting Torch, Air Filter/Regulator, Hose, Clamps, Mounting Bracket and Owner Manual Buyer needs to prepare air compressor and install either 110V or 220V power plug Shipping to PR, AK, HI, GUAM, VI and military station outside usa mainland is not free and will charge extra per the location.