ANZO USA 111357 Headlight Assembly

Ordered these for my ‘16 F150 to change the look of the truck, also was looking for better lighting. These are easy to install and look great! Mine did not come with the 3M connectors as stated were included, but wasn’t going to use them most likely anyways. Instead I soldered mine to ensure a good connection. The switchback feature is sweet. If you are thinking of buying these my only suggestion is to upgrade to H7 LEDs. I went with a couple packs of Sealights 6500k’s and replaced the halogens that came with the lights. Made a world of difference in the truck’s appearance and the night vision driving. Highly recommend this set up. Looks great at a fraction of the price!

Installed on my 2016 F-150 Lariat. These lights look so much better than stock. Installation wasn’t as easy as the video made it out to be. It’s not a negative to the lights though. Just takes some time to figure out how to remove the headlight assembly. Once you figure that out, it’s plug and play besides for the switchback wires. Mine came with scotchlocks, but I’m going to solder the wires instead. The one negative I have with these lights is that they don’t come with LED bulbs. The halogen bulbs are fine, but are a little underwhelming when you compare it to the assembly. I ordered some H7 led bulbs to replace the low/high beam. Overall, I love these lights. Well worth the money. They seem very well made.

Installation (Anticipate 2-4 hours): Ford does not make headlight maintenance easy on these trucks. There are a lot of bolts that need to be removed to access them and would suggest looking up a installation guide. There is a great detailed video by AutoHeadz on YouTube for the installation. I had a very hard time getting the wiring harness to clip into the headlight and broke the clips. I had to buy a new wiring harnesses and take it to the shop for installation. The switchback feature never functioned for me despite appropriate wiring. Look: They completely transform the look of the front end of the truck. They have a high-quality finish, and the LEDs are very bright. Operation: These lights do not serve as daytime running lights if you keep your headlight setting to automatic. The outer LEDs do not stay on the entire time. You have to manually turn on your lights if you want the daytime LED look. Not a big deal but mentioning it for those who care. The switchback feature never worked on my model despite appropriate wiring. However, when flipping the turn signal, the lights will blink amber as expected. Overall good-looking headlights with very bright LEDs. Not 5 stars due to the difficulty installing the wiring harness to the socket on the headlight.

I have been reluctant to pull the trigger on these for sometime. I have been looking at all the reviews and visiting the F150 for a while to understand the performance of these. I finally pulled the trigger and I could not be happier. They look amazing, and they fit the truck perfectly. I swapped out the projector halogen bulbs for hakari H7 LEDs. They are really effective and the switch back feature is awesome. Very happy so far. No evidence of moisture condensation even with the recent rain. Watch the video and installation is really quite easy. It should take about 45 min per side.

These are fairly easy to install. If you are not sure of your mechanic skills there are plenty of videos to show how to install them. I have had these for ONLY two years and I'm already seeing problems. The left headlight started allowing moisture in a week ago. This caused the lower portion of the switch back led lights to go out. You might be thinking I did not close the bulb cover right or maybe it came lose. Not the case at all this was the first thing I checked. Also there is a thin laminated film on the head light that is beginning to flake off. So far I have had no issues with the right side... yet.. Again I've only had them for two year. Now I need to remove them and find a BETTER headlight. I will probably go back to the stock. Oh! When I first bought these I saw reviews of this same problem happening to others who also purchased them. Save your money. Find something else. *** Update I called Anzo customer service and told them about the problem I am having with their product. The representative agreed that it was manufacturing defect however, the headlight assembly only has a one year warranty. The representative seemed extremely annoyed with my issue and suggested that I order a new set to resolve the issue. Again, this assembly only lasted two years. I highly suggest you go with a different company when purchasing aftermarket headlight assemblies.

These are great really easy to install. I would back what everyone else says about the lights that come with it. Get your led from Amazon when you order. It took me about 20mins each side to install. You do have to tap the wires to get the switchback but that’s really easy with. Quick splice snaps. These look really good. I’ve only had them in a little while but so far so good. You can probably sell your old lights and make up some of the cost. It’s a worth while investment. Would highly recommend.

My truck looks nice with the new headlights, I decided to keep the original bulbs just to see how it runs with it, installation is fairly ok, with no problems at all. I recommend the upgrade 👍

Perfect fit for my ‘16 F150 XLT SCREW. Love these headlights. Do yourself a favor, add two pairs of H7 LED bulbs and replace the low/high beam halogen bulbs provided by Anzo. I used forscan to change the white DRL to Amber, to match the raptor grille LED bulbs. Overall an easy install, just take your time. Great fit. Light output is so much better than OEM headlight/bulb setup and gives the truck a better look, in my opinion.

I bought these about 14 months ago and they have been trouble-free and excellent. The lighting is great with the cutoff keeping the light out of oncoming traffic's eyes. Even tho I upgraded to LED bulbs, I never get flashed. I love how they shine into the ditches. They are a very distinct look on my F150 and I have only ever seen one other in my city, and his weren't the switchback. I went into Forscan and made it so the white plank is my DRL and the orange is my signal. That way I don't have a low beam as DRL. The only thing is by doing that, my tail and marker lights are always on, but I don't mind that. Very happy with my purchase.

deberia de prender los cuartos con las luces automaticas y no hay seseñal de alarma al apagar el vehiculo si llevas los cuartos prendidos, con los faros originales si encienden los cuartos con las luces automaticas y si hay señal de alarma cuando apagas el vehiculo

I installed a set of these Anzo projector headlight housings into my 2016 Ford F150 XLT Supercrew. These look as if they could come directly from the factory this way. These do not look like cheap headlight housings. Very good factory dust caps that keep moisture out. The install can be a bit of a pain but that's no fault of Anzo that is the way Ford built the truck. I swapped in a set of Hikari H7 Thunder LED Bulbs for $49 per set and the combination works extremely well. The anzo housings actually accept the Hikari bulbs with no extended dust cap. The projectors to a very good job of providing an equal amount of light and I have a very distinct cut off. You will need to purchase 4 scotchlocks to tap in your signal light wires to the LED strip so they turn orange when turning but the rest is simply plug and play. On Amazon for $650 with free shipping these are worth every dollar at that price.

Great product so far. Seem to be high quality, look great and the install is pretty straight forward. You will have to wire in the LED ‘switchback’ lights but with the included connectors it’s easy enough. Had them in for a few weeks and been in 10c and 35c weathers and lots of rain and have had no leaks or issues. They do not come with LED bulbs but I did pick up some Ignite H7 LED bulbs from a local store and they work great! Definitely a noticeable upgrade from the stock halogen lights!

The factory lights were not great and we wanted something brighter. These were pretty good. The Daytime running lights are a lot better than factory on the XLT. Particularly like that they change colour for signal light. Dark background compliments the truck. (See photo) the projector lights are not substantially brighter so would recommend upgrading the bulbs before going through the effort of installing them because to do it later you have to uninstall the whole assembly again. It took a couple of hours to install them. The first one was longest about an 1.5 but the Second one was much faster once we figured out how to do it.